Electronic Cigarette Tanks & Clearomizers

Aspire Nautilus 2 Sub-Ohm Tank brings one of the most revered, trendsetting tanks in the history of the industry, bringing the classic Nautilus to the new era with a new chassis and improved airflow. Measuring 22mm in diameter, the Nautilus 2 features a sleeved tank section that dramatically increases impact resistance and overall structural integrity, making it perfect for travel. Designed for pure flavor and MTL styled vaping, the Nautilus 2 specifically caters to flavor enthusiasts looking for a more restrictive draw. Airflow enters the Nautilus 2 through a 5 airhole configuration that can be throttled all the way down to a single 0.5mm airhole. The Nautilus 2 utilizes the classic Nautilus Coil Structure, utilizing the traditional 1.6 ohm coil rated from 10 to 15W and the newer 0.7 ohm coil rated for 18 to 23W. Filling the Nautilus 2 is achieved through a threaded top fill system with a maximum capacity of 2.0 milliliters. Perfect for flavor enthusiasts and users looking for a restrictive draw, the Aspire Nautilus 2 is an excellent budget orientated atomizer that repositions this classic coil system as one of the premiere in it's respective market segment.Product Features22mm DiameterTop Fill System2.0ml Tank CapacityThreaded Top FillFully Sleeved Mid SectionProtects Glass SegmentJuice Viewing WindowNautilus Coil StructureVertical Coil Arrangement0.7 ohm (Aspire Nautilus 2 Replacement Coils )18 to 23W1.6 ohm10 to 15WAdjustable Airflow5 Airholes1mm to 0.5mmAdjustable from Fully Open to Single 0.5mm Airhole4mm Bore Drip TipGold Plated ContactStainless Steel and Glass ConstructionPackage ContentsOne Aspire Nautilus 2 TankOne 0.7 ohm BVC CoilOne 1.8 ohm BVC CoilSpare Glass SegmentSpare PartsUser Manual

Nautilus 2

C$29.99

17 Reviews

The SMOKtech TFV8 Cloud Beast Sub-Ohm Tank is the pinnacle of cloud chasing achievement within a Sub-Ohm system, featuring an extraordinary V8T8 Octuple Coil with a maximum output rated at 260W alongside a very versatile V8 Turbo RDA Head that features a two post, dual terminal build deck. The chassis of the SMOKtech TFV8 measures 24.5mm in diameter at the base with upgrades across the board in comparison to SMOKtech's former flagship tank, the TFV4. As compared to the TFV4, the TFV8's dual airslots measure 15mm by 2.5mm each, a 18% overall increase. The chimney and condenser is increased 15% in diameter and 30% in overall usable area as well, making the TFV8 truly a performance orientated chassis. The 6 milliliter maximum tank capacity is filled from the revised hinge and lock top fill system that increases the port size. The new coil family utilized with the TFV8 have been designed with the intention of providing unsurpassed vapor and flavor, with the marquee V8T8 Octuple Coil Head measuring 0.15 ohms with a maximum output range of 260W. Included with each set is also the flavor orientated V8Q4 that has an output range of 50 to 180W, providing an excellent middle ground of premiere flavor and vapor. The V8 Turbo RBA Head is one of the most capable in it's class, with an 18mm diameter deck that integrates a two post, dual terminal design with each terminal measuring 2mm in diameter. Ample airflow feeds into the V8 Turbo RDA, with dual 8mm by 5mm internal airslots while wicking is efficient due to the unified wick port designs. Designed to be unparalleled in performance, the SMOKtech TFV8 Sub-Ohm Tank truly lives up to the name of Cloud Beast by presenting an unrivaled performance platform.

Product Features:

Smok

● 24.5mm Diameter

● Hinge and Lock Top Fill System

○ Swivels Open and Shut

○ Fill Port

● 6.0ml Max Capacity

○ 5.5ml with T8V8 Coils

○ 6.0ml with T8Q4 Coils

● SMOKtech Turbo Coil Family

○ V8T8 Octuple Coil Head

■0.15 ohm

■Turbo: 6.6T

■Patented Octuple Coil

■50 to 260W Range

■120 to 180W Recommended Range

○ V8Q4 Quadruple Coil Head

■0.15 ohm

■Turbo: 5.0T

■Patented Quadruple Coil

■50 to 180W

■90 to 150W Recommended Range

■Dual Terminal Per Post

■2mm Diameter Terminals

■Dual 8mm by 5mm Internal Airslots

■Unified Wicking Ports

■Preinstalled Dual 0.28 Clapton Coils

○ Compatible with Additional V8 Coils

○ Designed to be used with the H Priv and Primus Box Mods

● Dual Adjustable 15mm by 2.5mm Airslots

○ 18% Increase over TFV4

○ Increased Chimney Diameter and Area

■15% Diameter Increase and 30% Area Increase over TFV4

○ 8.5mm Delrin Drip Tip

○ Stainless Steel and Glass Construction

Package Contents:

● 1x SMOKtech TFV8 Cloud Beast Sub-Ohm Tank

● 1x V8T8 Octuple Coil Head

● 1x V8Q4 Quadruple Coil Head

● 1x V8 Turbo RBA Head

● 1x Replacement Glass Tank Section

● Spare Parts Pack

● User Manual

Smok TFV8 Cloud Beast

C$44.99

12 Reviews

Vandy Vape's and The Vaping Bogan introduces their Bonza 24 BF RDA, a bottom fed dripping atomizer with a gold plated dual post quad terminal style building deck, a stepped airflow system, measuring at 24mm diameter and dual or single coil capability. The Bonza 24 has a 7mm deep juice well with centralized juice splitter for even juice distribution, as well as stepped airflow system for a smooth inhale. The gold plated dual post deck has four terminals, the outer terminals secures the coil through a top slotted flathead screw while the inner terminals utilizes a unique clamp style mechanism, making the Bonza easy to build. The Bonza 24 uses the popular 810 drip tip system and comes with an ULTEM wide bore drip tip, a resin wide bore drip tip, a delrin wide bore drip tip, and a 510 drip tip adapter. The golden 510 pin can be changed to a squonk-ready pin for any bottom feeding device. The Vandy Vape Bonza 24 BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.Product Features24mm DiameterDual Post Quad Terminal Style Build DeckOuter TerminalsTop Secured with Slotted Flathead ScrewsInner TerminalUnique Top Secured Clamp Style MechanismPEEK Insulator7mm Deep Juice WellGold Plated Deck and ScrewsJuice Flow Splitter in CenterStepped Airflow Design15 Air Holes Per SideFully CloseableGold Plated 510 ContactSquonk-Ready 510 Pin304 Stainless Steel810 Drip Tip17.5mm Bore ULTEM Drip Tip16mm Bore Delrin Drip Tip Included18mm Bore 810 Resin Drip Tip510 Drip Tip Adapter IncludedPackage ContentsOne Vandy Vape Bonza BF RDAOne ULTEM 810 Drip TipOne Delrin 810 Drip TipOne Resin 810 Drip TipOne T-ToolOne 510 Drip Tip AdapterOne Bottom Feed 510 PinSpare Part PackUser Manual

Vandy Vape Bonza 24 BF RDA

C$34.99

11 Reviews

The Vandy Vape Pyro 24mm RDTA is the latest high-performance rebuildable system to enter the market, deploying a Mixed Airflow Intake system with two different side airflow channels along with an elevated postless build deck design. The Pyro 24 RDTA measures 24mm in diameter, with one of the most sophisticated structures created by Vandy Vape. The 6-piece structure is fully disassembled, offering a dynamic and efficient rebuildable dripping tank system with 4mL maximum juice capacity accessed via in-fill mode. The build deck of the Captain RTA implements a quad terminal postless build deck, featuring a 2.5mm by 3.5mm diameter terminals set into the deck and tightened via side-tension flathead Phillips screws. Due to the lack of posts on the Pyro RDTA, the design also frees up build space and wicking area with the deep juice well to accommodating large coil structures and creative configurations. The crowning achievement lies within the Mixed Airflow Intake system, deploying two unique air slots on the AFC ring. Airflow enters this specialized air slot and redirects into two channels: one beneath the coil chamber and another directly into the side of the coils. Similar to other Vandy Vape products, the Pyro 24 comes with a variety of drip tip options, ranging from an 18.5mm wide Delrin Doc wide bore drip tip, 510 drip tip adapter, to a 17.5mm wide ULTEM drip tip to match the ULTEM tank section.Product Features24mm Diameter4mL Juice CapacitySuperior Stainless Steel ConstructionULTEM Glass ReinforcementOptional Pyrex Glass ReinforcementInnovative Postless, Quad Terminal Design2.5mm by 3mm Terminal OpeningsSide-Secured via Phillips Flat ScrewsTwo PEEK-Insulated Positive Terminal PostsTwo Negative Terminal PostsSingle or Double Coil ConfigurationsMixed Airflow Intake System - Two Different Airflow ChannelsConvenient In-Fill Mode - Refill via Removing Top Cap17.5mm Wide ULTEM Drip Tip18.5mm Wide Delrin Doc Drip Tip510 Drip Tip AdapterGold-Plated 510 ConnectionPackage Contents1 Pyro 24 RDTA1 Replacement Glass Tube1 18.5mm Delrin Doc Drip Tip1 510 Drip Tip Adapter1 Accessory Bag

VandyVape

VandyVape Pyro 24 RDTA

C$39.99

11 Reviews

The Zenith atomizer is a collaboration between Phil Busardo, Dimitris Agrafiotis, and Innokin. The goal was to create an easy and intuitive to use mouth to lung (MTL) replaceable coil-head atomizer. The Zenith features an easy top fill twist design that will automatically shut off the liquid flow when filling in order to prevent flooding and gurgling, an adjustable airflow, and an easy AND clean method to replace the coil. Great flavor and long lasting coils. The Zenith tank comes with 2 styles of drip tips for comfort. The Zenith tank comes with two different coils to tailor your vaping experience. A 1.6 Ohm Kanthal coil for a cooler vape at lower wattages and a 0.8 Ohm Kanthal coil for a slightly warmer vape and slightly higher wattages. There is also a QR code on the box that will direct you to tutorial videos that will help you in filling, cleaning, replacing the coil, and working with the tank in general. The Zenith tank is designed for the beginning and experience vapor alike looking for a quality MTL experience in an affordable package. The Zenith tank works great with Salt Nicotine Liquids.Product Features24mmPush to Fill System4ml E-Juice CapacityTwo Post, Single Terminal Build DeckSide Mounted ScrewsDual Wicking PortsDual Adjustable Bottom AirslotsGold Plated 510 PinReplaceable Coils1.6ohm0.8ohmPackage ContentsOne Innokin Zenith MTL TankOne 0.8ohm KAL Coil One 1.6ohm KAL Coil Pre-installedOne Spare Drip TipFour Replacement Mouthpiece O-RingsOne Quick Start Guide

Innokin

Zenith MTL Tank by PBusardo and Vapingreek

C$39.99

10 Reviews

Uwell presents the Valyrian, an evolutionary Sub-Ohm Tank platform presenting a 25mm diameter chassis with a 5 milliliter max capacity and the new Valyrian coil with quad coils and parallel legs, higher power, and coil pins for custom air flow and flavor. The Valyrian measures 25mm in diameter and features sleek and smart design elements that combine for a universally appealing design. The Valyrian features a heat insulated flip top fill method, with a press of a button the top pops open and reveals dual 3mm by 8mm fill ports. The Valyrian utilizes the new inner coil pins, each differentiates through flavor and airflow change, customizing the tank internally for each users preference. Three 8.5mm by 3mm triple adjustable bottom airflow makes for smooth and effective airflow, and can be fully closed to seal the system effectively. The Uwell Valyrian Sub-Ohm Tank is an excellent and revolutionary tank with superior construction, a all-new interchangeable inner coil pin system, and ergonomic designs throughout.Product Features25mm Diameter Base5.0ml Max CapacityHeat Insulated Flip to Fill Top Cap5mm by 8mm Dual Fill PortsValyrian Replacement Coils0.15 ohm Parallel Dual Coils95 to 120WThreaded Coil DesignUnique Interchangeable PinsPrecision Triple Adjustable Bottom Airflow8.5mm by 3mm EachStainless Steel ConstructionAvailable in Other FinishesPyrex GlassStainless Steel 510 Threading24K Gold Plated ContactPackage ContentsOne Uwell Valyrian Sub-Ohm TankTwo 0.15 ohm CoilsTwo Extra Inner Coil Airflow PinsOne Extra Drip TipOne Replacement Glass Tank SectionSpare Parts PackUser Manual

Uwell Valyrian

C$49.99

10 Reviews

DigiFlavor and The Vapor Chronicles introduce their Drop RDA, a 24mm, four post rebuildable atomizer with a gold plated built deck and stepped airflow design. Each of the four posts houses a single 3.5mm terminal, which allows for easy coil placement and maximum build space with open access to trim excess. Airflow enters the drop through a "T" shaped air slot fitted with 10 air holes per side and can be fully closed. The Drop RDA comes with a pair of 810-fitted wide bore drip tip and a 510 drip tip adapter for a fully customizable experience. The gold-plated 510 connectors can be switched out to a squonk-ready 510 pin to use with any of your preferred Bottom Feed devices. The Drop RDA by DigiFlavor and The Vapor Chronicles displays true versatility and customizability in today's market.Product Features24mm DiameterFour Build DeckSingle Terminal Per PostSide Mounted Flathead Screws3.5mm Each TerminalGold Plated DeckPEEK Insulator5mm Deep Juice WellStepped Airflow Design10 Airholes Per Side"T" ShapeFully CloseableGold Plated 510 Contact810 Drip Tip Fitment9mm Bore Acrylic Drip Tip10mm Bore ULTEM Drip Tip510 Drip Tip AdapterStandard 510 PinRaised Bottom Feed Pin IncludedPackage ContentsOne DigiFlavor x The Vapor Chronicles Drop 24mm RDAOne 9mm Bore Acrylic 810 Drip TipOne 10mm Bore ULTEM 810 Drip TipOne T-ToolOne Bottom Feed PinSpare Part Pack

Digiflavor Drop RDA

C$39.99

9 Reviews

The SMOK TFV12 Cloud Beast King Sub-Ohm Tank enters the market as the most capable Sub-Ohm Tank ever released, headlined by the extraordinary 350W maximum range of the V12 T12 Duodenary Coil Head, presenting unprecedented vapor and flavor possibilities. Following up on the worlds most popular Sub-Ohm Tank of 2016 with the TFV8 platform and its smaller editions, the TFV12 Cloud Beast King elevates the vape tank segment even greater, capable of outputting an incredible 350W maximum with the T12 coil. The chassis design of the TFV12 features multiple diameters, measuring 25mm at the base and 28mm at the widest point. The Hinge and Lock Top Fill System from the previous editions is fully implemented into the TFV12, with a single fill port and a maximum tank capacity of 6.0 milliliters. The new SMOK V12 Engine Coil Family brings the world class and industry leading coil designs implemented in the TFV8 series to another level, headlined with the T12 Duodenary Coil Head that features an unprecedented range of 60 to 350W. Alongside the T12 are the V12 versions of the popular X4 and Q4 coils found with the TFV8, featuring an extended range of 60 to 220W and 60 to 190W, respectively. Airflow for the TFV12 is arranged in a dual 15mm by 4mm airslot configuration around the base of the chassis, providing ample airflow even for the maximal range of the atomizer. Heralding in the newest generation of SMOK atomizers, the TFV12 Cloud Beast King Sub-Ohm Tank makes a bold but accurate assertion as the premiere cloud chasing tank on the market.Product Features25mm Diameter Base28mm at Widest PointHinge and Lock Top Fill SystemSwivels Open and ShutFill Port6.0ml Max CapacitySMOK V12 Engine Coil FamilyV12 T12 Duodenary Coil Head0.12 ohmPatented Duodenary Coil60 to 350W Range130 to 200W Recommended RangeV12 X4 Quadruple Coil Head0.15 ohmPatented Quadruple Coil60 to 220W100 to 170W Recommended RangeV12 Q4 Quadruple Coil Head0.15 ohmPatented Quadruple Coil60 to 190W90 to 160W Recommended RangeCompatible with Additional V12 Engine CoilsDual Adjustable AirslotsDual 15mm by 4mm AirslotsStainless Steel and Glass ConstructionPackage Contents1x SMOK TFV12 Cloud Beast King Sub-Ohm Tank1x V12 T12 Duodenery Coil Head1x V12 X4 Quadruple Coil Head1x V12 Q4 Quadruple Coil Head1x Replacement Glass Tank SectionSpare Parts PackUser Manual

Smok

Smok TFV12 Cloud Beast King

C$49.99

8 Reviews

Digiflavor introduces their Siren 2, a follow up to their original Siren GTA MTL Tank, now with a 24mm diameter and 9 airflow options for various airflow restrictions. The Siren 2 is a top fill system with two large fill ports that is capable of holding up to 4.5mm of E-Liquid. The two post, single terminal build deck has side mounted flathead screws which secure coil leads alongside a raised build deck that is closer to the drip tip for more intense flavor. Airflow enters the Siren 2 via a single adjustable bottom airslot that has 9 airflow adjustment options (included are 5 tapered airslots at various mm) for perfect airflow restrictions. Included with the Siren 2 GTA MTL Tank is a 5mm bore SS 510 MTL drip tip, a spare glass tank section, colored o-rings, and two prebuilt coils. The Digiflavor Siren 2 Two Post 24mm GTA MTL Tank retains the original Genesis inspired characteristics and retains optimal flavor recreation, making this a great MTL style rebuildable tank atomizer.Product Features24mm DiameterTop Fill SystemTwo Large Fill Ports4.5ml CapacityTwo Post, Single Terminal Build DeckSide Mounted Flathead ScrewsPEEK InsulationRaised Build Deck Closer to Drip Tip for More Intense FlavorSingle Adjustable Bottom Airslot14mm by 2mm Each9 Airflow Adjustment Options For Perfect RestrictionsIncludes 5 Tapered Airslots at Various mm5mm Bore SS 510 MTL Drip TipStainless Steel and Glass ConstructionPackage ContentsOne Digiflavor Siren 2 Two Post GTA MTL TankOne SS 510 MTL Drip TipSpare Glass SectionAdditional Colored O-Rings and ScrewsTwo Prebuilt CoilsT-Tool

Digiflavor

Digiflavor Siren 2 GTA 4.5mL

C$44.99

7 Reviews

Vandy Vape Berserker MTL RTA, is the latest atomizer from Vandy Vape. Its ventilation hole can be adjusted to only 0.8mm with the air control ring. It achieves the simple possibility of a real cigarette draw. There is an extra 4.5ml glass tube. It is easy to switch the capacity from 2.0ml to 4.5ml.Product FeaturesStainless steel constructionConvenient top filling systemPopular 24mm diameter fits most box modsAdjustable airflow holes can be adjusted down to only 0.8mm510 threading connection26mm overall diameterDimensions24 x 40 x 24mmVolume2mLUse the included glass extension to convert to 4.5mLPackage Contents1x Vandy Vape Berseker RTA1x 4.5mL Glass Tube1x Drip Tip1x Accessory Bag

Vandy Vape Berserker MTL RTA

C$44.99

7 Reviews

The Kayfun Prime promises to modernize the original Kayfun experience. A pure mouth to lung atomizer; it inherits the functionality and design of its predecessor, the Kayfun 5. That's not to say the internals are the same. The complete internals of the Kayfun prime has been completely redesigned and tuned specifically for MTL vapingThe Kayfun Prime offers an Airflow Control, that is externally adjustable in 6 increments from 1mm to 2mm airflow.Restrict or close off you liquid flow by turning the tank clockwise. In the closed position, you are able to open the top cap and conveniently fill the Kayfun Prime from the top through its large fill hole. An air pocket in the top cap prevents spillage if the tank is filled beyond its capacity, and also ensures an optimal liquid flow.Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil.The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eliminate temperature spikes and therefore create a better flavor profile.SvoëMesto's has also shrunken the evaporation chamber, which condenses the vapor and gives you a richer, and more flavorful experience, even at lower wattages.Product FeaturesAnti-heat drip tip with POM inlay (engraved)Top fillingBorosilicate glass Liquid control (fully adjustable) PEEK insulator External airflow control 316L stainless steel 510 connector Serial number for authenticationEasy assembly and maintenance MeasurementsDiameter: 22mmHeight: 45,5mm (without mouthpiece)Tank capacity 2ml (standard)4.5mL using the SvoeMesto Kayfun Prime Tank Extension⁠MaterialsStainless Steel ComponentsWNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A)Glass TankBorosilicate GlassInsulatorsPEEK, POM-CO-RingsNBR 70Package Contents1 Kayfun Prime with engraved steel tank1 glass tank1 spare kit

SvoeMesto

Kayfun Prime

C$174.99

7 Reviews

The O-Genny is the latest creation from OC&D. Continuing with the success of the O-Atty, it is a natural step forward that leads us to the creation of the O-Genny. Based on the O-Atty build deck and airflow design, the O-Genny takes all the features of the O-Atty and incorporates a Genesis Style tank.The main innovation, however, is a first of its kind fill port and plug system to refill the tank. It is the most leak proof and convenient Genesis fill system on the market. The main design elements of the build deck have been improved as well. New chambered post clamps makes coil lead installation easier along with new cap screw hardware that is bigger and more durable. Everything you love about the O-Atty has been perfected and optimized to bring you our best atomizer to date.The signature 30 degree angled airflow has been modified, allowing the user to select single or dual airflow with full adjustability. This is achieved using a 2 piece top cap system that will be offered in many materials and finish combinations to create a customized look. The O-Genny has the ability to be built a single or dual coil, with a selectable Ultem block plate to access wick channels. 22mm in Diameter and 30mm tall, the O-Genny is smaller than most mini tanks and maintains a 3 ML tank capacity. Europeans need not worry, however, a 2ml version will be available as well. We are proud to call the O-Genny the most advanced Genesis Style Atomizer on the market.

Odis Collection

O-Genny

C$150.00

6 Reviews

The Berserker MINI RTA by Vandy Vape is the compact rendition of the original, designed within a smaller form factor to create a tighter hit experience for Mouth-to-Lung users. Designed with similar aesthetics of the original Berserker MTL RTA, the Berserker Mini features a miniaturized structure with 22mm diameter with the addition of protective metal sleeve for a sleeker design. Each Berserker Mini comes with the option of standard Pyrex Glass as well as ULTEM Glass for a wide range of preference. The tank reservoir is easily refillable by a threaded top-fill method, exposing two large filling ports that feed into the juice reservoir. The compact build deck implements a simple-to-build configuration, integrating a two-post design where coil leads are placed under the flathead screws and top-secured for a consistent connection. Airflow enters the structure through two air slot injects for a tight draw after every inhale, fully adjustable to accommodate a wide range of user's preference. Finishing off the system are a pair of MTL drip tips designed specifically for mouth-to-lung experience as well as a burst of flavours from your favourite vape juice.Product Features22mm Diameter2mL Maximum Juice CapacitySuperior Stainless Steel ConstructionPyrex Glass ReinforcementULTEM Glass ReinforcementMetal Protective SleeveUser-Friendly Two-Post Build DeckClamp Top-Secured via Phillips ScrewsSingle Coil ConfigurationDual Slotted Bottom Airflow Adjustment - Tight AirflowULTEM MTL Drip TipDelrin MTL Drip Tip Gold-Plated 510 Contact PinPackage Contents1 Berserker Mini MTL RTA1 ULTEM Glass Tube1 Pyrex Glass Tube1 ULTEM MTL Drip Tip1 Accessory Bag

Vandy Vape Berserker Mini MTL RTA

C$44.99

6 Reviews

Oumier has created one of the most compact and powerful single build RDAs out there that simplifies the coil building process for those who are looking into buying an easy to use RDA. Featuring a conically designed top cap built for maximum flavour, this ULTEM top cap stays cool with every hit you take. No more hot lips! The deck is built for a single coil only, making this a go-to for simple builds of 3mm or less. With a smaller deck, your builds may need to be smaller than normal, but the Wasp Nano makes up for this with its amazing flavour. The adjustable 510 connection pin is removable and comes with a replaceable squonk pin for those who like the ease of a bottom-feeding RDA. It also contains a pretty deep juice well for its size (roughly 5mm) for less dripping throughout the day.Everything about this RDA is solid and desirable. From the adjustable airflow to its compact size, the Wasp Nano is a great addition to any collection, beginner or advanced. Although compact in design, this RDA produces decent sized clouds and does not skimp on flavour in any way. Don’t let this diminutive device fool you.Product Features22mm diameterBig deck for easy buildingUnique adjustable airflow systemBottom filling design with exchangeable squonk bottom pinULTEM heat resistant top capCompact design22mm stainless steel designDeep juice wellPackage Contents1x Wasp Nano RDA1x Spare kit 1x Organic Cotton1x Flathead screwdriver510 Bottom Feed Squonk connection

Oumier

Oumier Wasp Nano RDA

C$19.99

6 Reviews

Due to the nature of manufacturing and design, each Hellvape x Heathen Dead Rabbit 24mm RDA drip tip colours come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random. Hellvape introduces the Dead Rabbit 24mm RDA, designed by Heathen; a 24mm, top terminal, four post build deck with gold plated positive posts and a 5mm deep juice well. The Dead Rabbit RDA is capable of running both single and dual coil options and each terminal has side mounted hex flathead screws, which are both included. Airflow enters the Dead Rabbit RDA via top-side diagonal adjustable airflow which focuses on flavour and minimizes leaking. The airflow can be adjusted for both single and dual coil options and a knurled grip allows for adjustment of the airflow with ease. Included with the RDA is a 10mm wide bore 810 resin drip tip, a 10mm wide bore 810 Delrin drip tip, and a 510 drip tip adapter for various drip tip styles and use. The Dead Rabbit RDA also includes a gold plated bottom feed pin to convert your RDA into a bottom-feeding rebuildable atomizer. With its unique topside diagonal airflow and convenient to build on build deck, the Hellvape Dead Rabbit 24mm RDA is a stylish, high-functioning rebuildable atomizer at an affordable price!Product Features24mm DiameterTop Terminal Four Post Build DeckSingle Terminal Per PostSingle or Dual Coil Options2.5mm Terminals Per PostSide Mounted Hex Screws or Side Mounted Flathead ScrewsGold Plated Positive Posts5mm Deep Juice WellDouble O-Ring SecuredPEEK InsulatorTop Side Diagonal Adjustable Airflow10mm by 2.5mm Each AirslotSingle or Dual Coil OptionsFocus on FlavorMinimizes LeakingFully CloseableKnurled Grip To Adjust Airflow With Ease10mm Wide Bore 810 Resin Drip Tip10mm Wide Bore 810 Delrin Drip Tip Included510 Drip Tip Adapter IncludedGold Plated 510 ConnectionGold Plated Bottom Feed Pin304 Stainless Steel ConstructionPackage ContentsHellvape Dead Rabbit 24mm RDAOne 10mm Wide Bore 810 Resin Drip TipOne 10mm Wide Bore 810 Delrin Drip Tip510 Drip Tip AdapterSpare Parts PackGold Plated Bottom Feed PinAllen Key

Hellvape Dead Rabbit 24mm RDA

C$37.99

5 Reviews

The Wake Sub-Ohm Tank is the newest from Wake Mod Co (the original creators of DotMod). Utilizing their proprietary Wake Sub-Ohm Coils, the Wake Tank is capable of extremely satisfying flavour and cloud production with the pre-installed 0.5Ω (ohm) setup. The Wake Sub-Ohm Tank utilizes an adjustable bottom airflow design with a proprietary drip tip and top fill design. The gold-plated internal design and gold-plated copper 510 pin also allow for better conductivity to keep resistance dialed in.Product Features24mm diameter3.5mL CapacityGold Plated Stainless steel ConstructionMatte anodized Aluminum Top Cap And Airflow RingAdjustable Bottom AirflowAcrylic Flavor-Bore Drip TipTop FillGold Plated Copper 510 PinPackage Contents1x Wake Sub-Ohm Tank2x 0.5 Ohm 1 pre-installed1x Spare replacement glass1x Spare Drip TipExtra O-Rings

Wake Mod Co

Wake Tank

C$44.99

4 Reviews

Uwell returns in 2017 with the smaller version of the Crown 3, the Crown 3 Mini, an evolutionary update to one of the most beloved Sub-Ohm Tank platforms in the history of our industry. The Crown 3 Mini has a 22.6mm diameter base with a 2ml E-Juice capacity, but utilizes the same mechanisms as the original Crown 3. The tank has a threaded top fill method that exposes dual fill ports for an easy pour to fill method, and includes two crown 3 plug and pull replacement mechanisms: a 0.25 ohm SUS316 parallel coil that can be ran from 80 to 90W and a 0.4 ohm kanthal parallel coil that can be run from 55 to 65W. The threadless design allows for convenient and fast coil installation and replacement. The Crown 3 Mini also uses a triple adjustable bottom airflow system and is available in six different finishes. The Uwell Crown 3 Mini Sub-Ohm Tank is an excellent midwattage tank with superior construction, a convenient Plug and Pull coil system, and ergonomic designs throughout--all in a smaller, more compact platform!Product Features22.6mm Diameter Base2ml Max CapacityAnti Leak Threaded Top Fill Method3.5mm by 6mm Dual Fill PortsCrown 3 Plug and Pull Replacement Mechanism0.25 ohm SUS316 Parallel Coil80 to 90W0.4 ohm Kanthal Parallel Coil55 to 65WVertical Coil DesignPlug and Pull DesignThreadless DesignConvenient and Fast Coil Installation and ReplacementPrecision Triple Adjustable Bottom Airflow9.5mm by 2mm EachStainless Steel ConstructionAvailable in Other FinishesQuartz GlassStainless Steel 510 Threading24K Gold Plated ContactPackage ContentsOne Uwell Crown 3 Mini Sub-Ohm TankOne 0.25 ohm SUS316 Parallel Coil80 to 90WOne 0.4 ohm Kanthal Coil55 to 65WOne Replacement Glass Tank SectionSpare Parts PackDrip Tip CoverUser Manual

Uwell Crown 3 III Mini Tank

C$39.99

4 Reviews

The Indestructible Atty by JayBo Designs follows its title, bringing together top quality materials, specially designed negative posts, specially designed airflow and top level manufacturing all at an incredible price!

Made in the USA

The Indestructible Atty by JayBo Designs is the evolution from the critically acclaimed TOBH Atty, with an emphasis on not only improving overall design, durability, and functionality, but also competitively pricing the Indestructible Atty to a whole new market. Airflow has been designed at a specific height in an effort to maximize the overall effectiveness with nearly every type of coil configuration, with dual 3mm holes on each side, for a consistent and smooth vaping experience. A single airhole option is also integrated for single coil builds. The airflow couples with the tapered negative post edges, and with appropriate builds, can be used in conjunction to adjust airflow accordingly. Renowned for bringing three part RDA's to a completely new level, the Indestructible Atty continues this line, with a small recess at the top cap allowing for easy removal and adjustment, with a sloped inner top cap for effective vapor delivery. The Negative posts feature a cutaway, flat bottom that allows extremely secure seating on the internal post shelf, greatly increasing wire contact and security while also allowing for a myriad of build configurations. Handmade SS screws are pitched specifically for the positive and negative posts, with the positive screw tapered for maximum shelf contact. The deck also features deepened juice well recess measuring out at approximately 6mm. Manufactured out of 303 Stainless Steel, the Indestructible Atty follows its title, utilizing PEEK insulators rated at an operating temperature of 480 degrees Fahrenheit, Buna-N o-rings, pure C101 Copper for the contact screw for maximum conductivity, and a non fully hollow positive post. Stylish, functional and built to last, the Indestructible Atty by JayBo Designs is one of the premier RDAs on the market!

Product Features:
22mm Diameter
Dual 3mm Airholes (6mm Each Side)
Single 3mm Airhole for Single Coil Builds
Three Part Design
Recess at Top Cap for Easy Removal
Sloped Inner Cap for Effective Vapor Delivery
Cutaway, Flat Bottom Deckmilled Negative Posts
Non-Fully Hollow Center Post
Handmade SS Screws
303 Stainless Steel
PEEK Insulator
C101 Copper Contact
Buna-N O-Ring
JayBo Engraving

***Please be sure to clean your atomizer before use***

Jaybo Designs

Indestructible Atty

C$20.00

4 Reviews

Following one of the most popular rebuildable tanks of 2017, the Kylin Mini RTA by Vandy Vape deploys an innovative two-post, single coil structure with the integration of 180° Honey Comb Airflow Intake. Expertly crafted specifically by the illustrious designed Stefen Z., the Kylin Mini RTA is beautifully machined with study Stainless Steel construction with inspirations of the original Kylin RTA. It features unique 810 Resin wide bore drip tip and a bulb glass tube for extended e-juice capacity. More info to be released.Product FeaturesDesigned by Stefan Z.Superior Stainless Steel ConstructionPyrex Bubble Glass Reinforcement24K Gold-Plated Build DeckInnovative Two-Post, Single Terminal DesignSingle Coil ConfigurationsPEEK-Insulated Postive PostDual External Airslots - Fully Adjustable180° Honey Comb Internal Airflow DesignConvenient Threaded Top-Fill Design810 Resin Widebore Drip TipGold-Plated 510 Contact PinAvailable in Stainless, Black, Gold, Rainbow

Vandy Vape Kylin Mini RTA

C$44.99

4 Reviews

Uwell introduces the Nunchaku, presenting at 25.2mm diameter chassis with a 5-millilitre max capacity and the new Nunchaku coils. The Nunchaku measures at 25.2mm in diameter and features sleek and smart design elements that combine for a universally appealing design. The Nunchaku features a Threaded Top Fill Method that unscrews to reveal dual fill ports. The Nunchaku utilizes the Plug and Pull Replacement Coil Family, with a threadless design that features reinforced seals to provide a liquid-tight fit and finish. Each coil features a vertical coil arrangement. Two 10mm by 2mm adjustable bottom airflow makes for smooth and effective airflow and can be fully closed to seal the system effectively. The Uwell Nunchaku Sub-Ohm Tank is an excellent mid-wattage tank with superior construction, a convenient Plug and Pull coil system, and ergonomic designs throughout.Product Features25.2mm DiameterThreaded Top Fill System5ml Tank CapacityNunchaku Coil FamilyPlug-Pull Coils Configuration0.25 ohm40 to 50WOrganic Cotton0.4 ohm45 to 55WOrganic CottonDual Adjustable Bottom Airflow System10mm by 2mm Each AirslotFully CloseableCondensation HolderStainless Steel and Glass ConstructionPackage ContentsOne Nunchaku Sub-Ohm TankOne 0.25 ohmOne 0.5 ohmOne Replacement Glass Tank SectionSpare Parts PackUser Manual

Uwell Nunchaku Sub-ohm Tank

C$39.99

4 Reviews

he Rhyno RDA by Standard Functions
Standard Functions has a reputation for keeping all bases covered when it comes to options, style, and functionality, and they are keeping that reputation alive with their new atomizer: The Limited Edition, Pro Series Rhyno RDA. The Rhyno is a stainless steel constructed atty with a 24K gold plated, T-post design and 3mm deep kidney-shaped juice wells. The Rhyno also features a standard height sleeve with a Chuff style drip top, AND a Derringer style top cap, both with huge, 7 x 2.5mm cyclops-style airflow holes that concentrate air directly under the coils, providing tons of options for a wide variety of builds. The deck of the Rhyno is built with raised airflow control tabs on diagonal sides of the posts, making adjustments as easy as rotating the sleeve clockwise. Finished off with detailed laser engravings, the Rhyno is a gorgeous steamroller of an atty with features both simple and extravagant.

Features:
-Stainless steel construction
-24K gold plated, T-post design with 2mm post holes
-3mm deep, kidney-shaped juice wells
-Full-sized sleeve with 7 x 2.5mm, cyclops-style airflow vents and delrin, Chuff style drip top
-Derringer style top cap with 7 x 2.5mm, cyclops-style airflow vents for maximum flavor production
-Raised airflow control tabs for ease of adjustment and air concentration directly under the coils
-24K gold plated, adjustable contact
-Detailed laser engravings
-Individually serialized

Standard Functions

Rhyno RDA

C$64.99

4 Reviews

Tugboat Slam Cap by Flawless

This slam cap by Flawless fits all Tugboat RDAs. At about half the size of the Tugboat RDA, this cap will add a sleek look to your favorite Tugboat. If you're looking for a sleek, stealthy cap, look no more.

Tugboat Slam Cap

C$44.99

3 Reviews

Description Vandy Vape Pulse 24 BF RDA Vandy Vape's Pulse 24 BF RDA is a bottom fed dripping atomizer with a gold plated post-less deck with a slanted jet funnel adjustable top airflow system, now with a 24mm diameter and dual coil capability. The Pulse 24 is designed for use with bottom feeding squonk devices and has a 7mm deep juice well with centralized juice splitter for even juice distribution, as well as a tubular jet funnel top airflow system to prevent leaking through the airflow. The gold plated post-less deck can accommodate coils up to 10mm in length and positions coil to be parallel with the airflow jet funnels utilizing a locking mid-section. The Pulse 24 uses the popular 810 drip tip system and comes with an ULTEM
widebore drip tip, a delrin
widebore drip tip, and a 510 drip tip adapter. The Vandy Vape Pulse 24 BF RDA was designed for maximizing flavor and vapor production in a leak resistant platform ideal for your bottom feeding squonk setup.Product Features24mm DiameterDual Terminal Post-less Style Build Deck2.5mm Each TerminalSide Mounted Phillips ScrewsPEEK Insulator7mm Deep Juice WellGold Plated Deck and ScrewsJuice Flow Splitter in CenterSlanted Jet Funnel Adjustable Top AirflowTwo Airflow Jets Per SideDirects Airflow Directly Onto Coil3mm Diameter Per JetLocking MidsectionKeeps Airflow Parallel to Coil24K Gold Plated 510 Contact304 Stainless Steel810 Drip Tip11mm Bore ULTEM Drip Tip11mm Bore Delrin Drip Tip Included510 Drip Tip Adapter IncludedPackage ContentsOne Vandy Vape Pulse 24 BF RDAOne ULTEM 810 Drip TipOne Delrin 810 Drip TipOne T-ToolOne 510 Drip Tip AdapterOne Build RodSpare Part PackUser Manual

Vandy Vape Pulse 24 BF-RDA

C$39.99

3 Reviews

The Aeolus Lite combines your favorite features from the Aeolus V1 and the Aeolus 2-Pro – seamlessly integrating them into a new sleek, superior design.

Our signature vertical airflow system remains as innovative as ever, featuring easily adjustable airflow settings to satisfy even the most demanding vapers. Since our airflow system is positioned on top of the RDA, it promotes superior flavor while eliminating spitback and leaks.

The Aeolus Lite retains our three-piece setup: deck, barrel, and top cap. Each part is connected by two sturdy o-rings, eliminating the possibility of a loose-fitting top cap or barrel. The deck features a large juice well and a new 4-post design that can accommodate every build style. This RDA is designed for maximum functionality and versatility.

The Aeolus Lite is made from anodized aluminum and is available in 12 different colors. Each RDA comes with a matching drip tip and a wide-bore chuff cap. These, combined with our adjustable airflow settings, allow you to configure your Aeolus Lite to function anywhere on the spectrum between condensed flavor and massive vapor production. It has never been easier to display your personal style with the vast amount of color variations and configurable options available.

• Vertical Airflow System
• Anti-Leak System
• PEEK Insulators (649.4°F)
• Unparalleled Flavor
• Wide Range of Airflow Configurations
• Additional Small Airholes for Tighter Draws
• Anti-Spin Square Centerpost
• Large Post Holes
• 18K Gold-Plated Brass Contacts
• Top Cap, Barrel, and AFC: Anodized Aluminum
• 22 mm Diameter

Syntheticloud Tech

Aeolus Lite

C$59.99

3 Reviews

The Vandy Vape Berserker MTL RDA is a mouth-to-lung rebuildable dripper with a small chamber designed for flavour. This dripper has a unique airflow design with "inserts" with various sizes and shapes of air flow options so you can tailor your experience. The kit comes with both a solid 510 pin for dripping and a hollow pin for BF squonk mods. It's an 18mm diameter atomiser but the kit includes two different size beauty rings (22mm and 24mm) so it will look good on most mods. The kit includes a very handy build tool to aid you in pushing the coil down closer to the air inlet inserts.Product FeaturesMTL BF RDASmall chamber for max flavourUnique adjustable air flowLarge juice well6 different air flow insertsAdjustable air flow into the insertsUltem MouthpieceIncludes "coil correction" build toolPackage ContentsFully assembled Berserker MTL RDA with Ultem tipSquonk pinSpare parts and toolsUser guide

Vandy Vape Berserker MTL RDA

C$44.99

3 Reviews

The LowPro RDA is the shortest atomizer that has been released thus far in the market, measuring an absolutely unbelievable 10mm from base to the start of the widebore drip tip, combining with ample dual and single adjustable airflow, a 3.5mm deep juice well, a unique build deck, and a squonk ready additional center pin. The LowPro takes a unique method to the build and post construction, utilizing a cross deck post system that features negatives milled directly from the outer rim and an isolated positive post. This style enables a plethora of builds, including dual coil and single coil configurations. The positive post is plated in silver to ensure a high level of electrical conductivity. Airflow options maximize at 10mm by 2mm for dual or single airflow configurations, allowing for absolutely tremendous airflow while also being able to be throttled down for flavor centric vaping styles. A Delrin Honeycomb Filter simultaneously reduces spitback while providing airflow disruption, connecting into a 12mm competition widebore tip. Packing in a full feature list into an unbelievable form factor, the LowPro RDA by is the quintessential RDA for extreme stealth and compact set-up chasers.

Product Features:

- 22mm Diameter
- 10mm Base to Start of Drip Tip
- 14.5mm Full Height

- 10mm Dual Slotted Airflow
* 10mm x 2mm
* Single Airflow Option
* Fully Adjustable

- 3.5mm Deep Juice Well
- Deckmilled Negatives
- Squared Base and Insulator Center Post
- Silver Plated Positives

- 12mm Competition Bore Built-In Delrin Drip Tip
* Delrin Honeycomb
* Spitback Protection

- Airflow Disruption
- Additional Squonk Ready Center Pin
- The Shortest RDA to Date

Product Includes:
- One LowPro RDA
- One Additional Honeycomb Delrin Piece
- One Squonk Ready Center Pin
- Additional Screws, and Screws

MysticAtmos

LowPro Dripper RDA

C$49.99

2 Reviews

Redesigned Kennedy Comp "The Kennedy 22"
Smoother Draw, Virtually Eliminates Leaking (Even When Careless)
The quad tube design for increased airflow and cooling

Kennedy Enterprises

● flavor is awesome
Stainless Steel - Copper - or Brass
Copper Center Post
Domed Chamber Top Cap
4 Direct Bottom Air Holes
Extra Large Juice Well (Up to 30 Hits per Drip)
20 Gauge Kanthal Support
No Air Holes in the Top Cap
Copper 510 Contact
Phillips Head Screws
22mm Diameter
Wide Bore Drip Tip Included
***** Fits All of Our Caps**** (Dragon, Demon and Gremlin) Excludes new 24mm Cap

The Kennedy 22 Dripper

C$89.99

2 Reviews

Aspire's Revvo Sub-Ohm Tank is a 24mm, threaded top fill tank with an innovative spring-loaded fill system and the new horizontal orientated ARC (Aspire Radial Coil) coil head. A single spring loaded fill port is used to fill the tank, which is capable of holding up to 3.6ml of E-Liquid. The Revvo Sub-Ohm Tank utilizes the ARC Coil Family that features a unique stove top style coil system, capable of running 50 to 100W but recommended to be used at 80 to 85W. Airflow enters the Revvo Sub-Ohm Tank via triple top adjustable airflow, measuring at 10.5mm by 2.5mm each air slot and can be fully closed. A 12mm wide bore drip tip acts as the drip cap for the Revvo. With the new ARC coil head and a spring loaded fill port, Aspire's Revvo is a must have for flavour and cloud chasers alike.Product Features24mm DiameterStainless Steel Protective Glass SleeveThreaded Top FillSingle Spring Loaded Fill Port3.6ml Tank CapacityTriple Top Adjustable Airflow10.5mm by 2.5mm Each AirslotFully CloseableARC (Aspire Radial Coil) Coil FamilyHorizontal Orientation0.10 to 0.16 ohm50 to 100W80 to 85W RecommendedKanthal AF WireOrganic CottonDrip Tip Acts as Drip Cap12mm Wide BoreStainless Steel and Glass ConstructionPackage ContentsOne Aspire Revvo Sub-Ohm TankTwo ARC 0.10 to 0.16 ohm Replacement CoilsProtective Silicone CapSpare Glass SectionSpare Parts PackUser ManualWarning Card

Aspire Revvo Sub-ohm Tank

C$39.99

2 Reviews

VooPoo introduces the UFORCE Sub-ohm Tank, a sub-ohm tank with an upgraded venting system and triple airflow slots for a balanced and tasty inhale. The UFORCE utilizes a quick vent channel to produce huge vapor without heating the tank up too rapidly. The shorter path from the air intake to the outtake will rapidly discharge the heat, users will enjoy great flavors and tremendous clouds without the drip tip over heating. The UFORCE utilizes the U2 0.4 ohm coil rated at 40 to 80W and best at 55 to 65W and the UForce U4 0.23 ohm coil rated at 50 to 120W and best at 60 to 80W. The juice enters the UForce through a 7mm by 3mm fill port and can accommodate 3.5ml of E-Liquid. With amazing flavor and balanced air channels, the UFORCE Sub-Ohm Tank goes great with any mods.Product Features24.6mm Diameter Base3.5ml Max CapacitySlide to Fill7mm by 3mm Fill PortsUForce Replacement Coil FamilyUFORCE U20.4 Ohm Coil Head40 to 80WBest at 55 to 65WOrganic CottonUFORCE U40.23 Ohm Coil HeadQuadruple Coils50 to 120WBest at 60 to 80WOrganic CottonPrecision Triple Adjustable Bottom Airflow10mm by 3mm EachStainless Steel ConstructionAvailable in Other FinishesPyrex GlassStainless Steel 510 Threading24K Gold Plated Contact14mm Wide Bore Drip TipPackage ContentsOne VooPoo UFORCE Sub-Ohm TankOne UFORCE U2 0.4 ohm Coil HeadPre-InstalledOne UFORCE U4 0.23 ohm Coil HeadOne Replacement Glass Tank SectionSpare Parts PackUser Manual

VooPoo

VooPoo UFORCE Sub-ohm Tank

C$39.99

2 Reviews

Aspire Quad-Flex Survival is an innovative 4-in-1 tank kit, which can be used as Nautilus X tank, RTA, RDA and Squonk style RDA. Quad-Flex will meet your different vaping needs.

Product introduction
Aspire Quad-Flex Survival provides the ultimate multi-device package complete with four configurations of atomizer in one streamlined kit. From the refined flavor beast and those who enjoy traditional tight pulls, to vaping cloud chasers, the Quad-Flex covers all bases.
Quad-Flex 4-in-1: Four ways to Flex, survive any situation with the following quick-fit configurations:
Quad-Flex RDTA - drop-wick tank with dual or single Airflow
Quad-Flex RDA with Turboline Side Airflow
Quad-Flex squonker (bottom feed) RDA with Turboline Top Airflow
Nautilus X 2ML Top Airflow flavor tank

Parameters
Capacity: 2ml
Diameter: 22 mm
Thread: 510 thread
Material: Stainless Steel + Pyrex glass
Dual coil velocity-style deck
Prebuilt coil parameters:
-Kanthal AF
-Clapton
-Core: 26GA
-Wrapped: 35GA
-ID: 2.95mm
-Single coil resistance: 0.8 - 0.9ohm

It comes with
1 x Quad-Flex RDTA
1 x Replacement Nautilus X 2ml Pyrex
1 x Nautilus X Top Hardware
1 x 510 Drip Tip Adapter
1 x Capillary Screw
1 x Top Hardware with Top Airflow
1 x RDA Base
1 x Nautilus X 1.8ohm Coil
1 x Baggy of Organic cotton
1 x Allen Wrench
2 x Pre-Built Clapton coils
4 x Extra Grub Screws
1 x Extra O-ring Sets

Innovative 4-in-1 tank (Nautilus X tank, RTA, RDA and Squonk style RDA)
Adjustable top airflow
Leak-proof design
2ml capacity

Quad-Flex Survival Kit

C$54.99

2 Reviews

The Aeolus Rebuildable Dripping Atomizer Version 2 (Pro)

pronounced [ˈe.o.los], (ay-o-los)

Key Features:

Syntheticloud's Signature Vertical Airflow System

All of our atomizers will feature our signature Vertical Airflow System. This system is vastly superior to current airflow dynamics that other manufacturers use. It works by directing airflow directly over and around the heated coils, then evenly clearing out all vapor produced within the chamber. This ultimately produces a much cooler, denser, and tastier vapor while also preventing stagnant vapor from collecting at the bottom.

Versatile Airflow Control

We wanted to cater to the entire spectrum of the vaping community so we implemented a configurable airflow control on all of our designs. With our versatile airflow control system, you are able to select the number of channels in order to adjust the airflow to fit your needs. Do you need competition clouds? The Aeolus V2's maximum airflow setting is about 3x that of the Aeolus V1. Are you a flavor-chaser instead? We included a smaller airhole on each side that cater to those who prefer mouth-to-lung hits. Still not enough flavor for you? The Aeolus V2's airflow control system allows you to dial down to virtually any size airflow.

Anti-Leak Cover

Ever since we first started vaping, leaking has always been the primary reason that deterred us from using rebuildable dripping atomizers. The thought of wasting our favorite juices and spilling it on our clothes and furniture was enough to make us cringe; it was a mess--figuratively and literally. We felt that the horizontal air flow designs of current atomizers were soon to become obselete and we wanted to be the manufacturer that elevates the vaping community into a new status quo. Because our atomizers' airflow draws from the top, you no longer have to worry about your atomizer leaking in your pockets or spilling out when your mod is placed horizontally.

Anti-Spitback Design

Thanks to our signature Vertical Airflow System, you will never be burdened by splashing juice again. The downward pressure of the airflow prevents the juice from splashing into your mouth, which is also great for cloud competitions since it allows you to perform an extended pull and push without having to worry about a mouthful of juice and nicotine.

Reverse-Threading System

Our Aelous V2 features a unique reverse-threading system that prevents your barrel/sleeve accidentally being removed from the deck. The reverse threading system ensures that your device will never threadlock and also includes an o-ring that serves to eliminate any possibility of your juice leaking out from the deck. Since the deck is completely sealed off, the entire atomizer acts as a juice well.

Two Piece Deck

The contacts in the Aeolus V2 Pro are made with pure naval brass in order to minimize voltage drop. We plated the brass with 18k gold to keep the flavor of your juice unaltered, all while giving the deck that high-end look and feel. Since brass is a relatively soft metal, we used stainless steel to make the threading to ensure that your atomizer will be fully functional for as long as possible. The stainless steel screws in the deck are used to hold the two pieces together.

Specifications

Everything you loved about the Aeolus RDA:

‣ Syntheticloud’s Vertical Airflow System

‣ Syntheticloud's Anti-Leak System

‣ PEEK Insulators (649.4ºF)

‣ Unparalleled Flavor

New Features/Improvements:

‣ Wider Range of Airflow Configurations

‣ 3x More Maximum Airflow

‣ Additional Small Airholes for Tighter Draws

‣ Shorter Barrel, Lower Profile

‣ Two Piece Deck

‣ Reverse-Threading System

‣ Anti-Spin Square Centerpost

‣ Larger, Square Post Holes

‣ 18K Gold-Plated Brass Contacts

‣ Stainless Steel Barrel, Top Cap, and AFC

Syntheticloud Tech

Aeolus V2 Pro - Stainless Steel

C$59.99

2 Reviews

iJoy Combo Interchangeable Decks are utilized in conjunction with the iJoy Combo RDTA and Sub-Ohm Tank System (sold separately) and offer a great diversity of functionality. Each deck features extensive 24K Gold Plating and PEEK insulation, measuring 20.5mm in diameter each.Product Specifications:IMC5Two Post Unified Style TerminalsOne Large Opening Per Post2mm by 6mm Terminals OpeningsTwo Post Mounted Phillips Screws Per PostDual Coil CompatiblePEEK InsulatorQuad Wicking PortsSidewall CutoutsGold PlatedSpare Screws IncludedRDA BaseConvert RDTA to be an RDA instead

iJoy

iJoy Combo RDTA Interchangeable Deck

C$9.99

1 Review

The DOODE RDA is a creation from Ryan (Squidoode). Squidoode is known within the community for his progressive coil creations, YouTube channel “The Art of Vaping” and attention to craft/detail. This is the first atomizer designed by Ryan with the intent to accommodate a broad range of builder experiences from beginners to your master builders. The DOODE RDA offers a unique building platform, which is elegant with its modest appearance, affordable and dynamically functional.Product Features24mm Barrel Diameter – 26.75mm Overall Height (not including drip tip).22.75mm Build Deck.11mm I.D. wide bore recessed Delrin drip tip.Standard 510 connection w/ gold plated screw.Peek insulators.Unique "Collet Post Assembly" rebuilding platform.Gold plated brass Post/Inserts/Nuts.Air Slit designed for under coil air movement.Adjustable horizontal airflow combined w/ Air Slit generates a large range of airflow options.Various “Collet Inserts” ranging in cutout sizes to accommodate a wide range of builds. *Atomizer comes preloaded with an extra set of M sized Collet Inserts.S - 1.3mm, M - 1.9mmL - 2.4mmXL - 3.0mm12mm length from centerline to centerline of posts for wide coil fitment.1/4″ Doode Wrench & spare O-rings included.

Squidoode

The DOODE RDA by Squidoode

C$50.00

1 Review

From the original makers of DotMod (James and Illeigha) comes the Wake RTA.Postless 24mm rebuildable tank built with flavour in mind. This tank takes on the difficult task of utilizing a rare feature in the rebuildable tank game: The Wake features a full 24K Gold Plated Postless Build Deck and contact pin with adjustable bottom airflow to allow for a sleek and minimalist form factor. Simple twist off cap for easy top fill design allows for quick and painless e-liquid filling.Product Features24mm diameterPostless Deck Design3.5mL CapacityGold Plated Stainless steel ConstructionMatte anodized Aluminum Top Cap And Airflow RingAdjustable Bottom AirflowAcrylic Flavor-Bore Drip TipTop FillUse replaceable coils by removing build deckWake Mod Co Wake Tank Replacement Coils⁠Gold Plated Copper 510 PinPackage Contents1 x Wake RTA1 x Spare Replacement Glass4 x Spare Hex Screws1 x Allen Key1 x Spare Drip TipExtra O-rings

Wake Mod Co

Wake Tank RTA

C$54.99

1 Review

The Kennedy RDA by Kennedy Enterprises is the next version of the critically acclaimed Kennedy RDA, introducing a newly conceptualized airflow style alongside a new size for box mod centric set-ups, all while keeping the incredible foundational elements of the original. Airflow has been redesigned to provide a more aesthetically pleasing look, integrating a dual 8mm by 3mm airslot that feeds into each pair of airflow tubes. The airflow tubes provide a concentrated and direct airway path to each coil while simultaneously doubling as a fantastic anti-spill mechanism.The directly funneled airflow pairs with the domed inner chamber, providing a smooth and direct vape experience. The Kennedy also features an extraordinarily deep juice well, providing up to 30 standard drops of fill capacity, making extended vaping with a RDA an actuality. Each Kennedy includes an 11mm Widebore Drip Tip, providing excellent airflow. Revised and updated, with a new size for box mod set-ups, The Kennedy RDA by Kennedy Enterprises is back and better than ever.

Product Features:

Kennedy Enterprises

● 24mm

● Quad Tube Airflow

○ Fed by Dual Slots Measuring 8mm by 3mm

○ Extremely Leak Resistant Design

○ Stylized and Elegant Look

● 11mm Widebore Drip Tip

● Three Post Design

○ Copper Center Post

○ 2mm Post Holes

○ Extremely Deep Deck

○ Can Hold Up to 30 Standard Drops

○ Black / Stainless Steel

○ Black / Brass

● Brushed Stainless Steel Construction

● Copper Contact Pin

● Kennedy Engravings

The Kennedy 24 Dripper

C$99.99

1 Review

Product Features25mm DiameterTwo Post Build Deck Dual Coil SystemTop Mounted Flat Head ScrewsStacked Staggered Posts2.5mm Posts HoldesPEEK Insulator22mm Deck Diameter3.5mm Deep Juice WellAdjustable Directional AirflowFour 3mm SlotsGold PlatedCan Be Closed One Hole At A TimeCan Be Fully ClosedTwo 2mm by 4mm Snake Bite Airflow HolesGold PlatedAdjusted Using Flathead ScrewdriverDual Adjustable Air Holes4mm Diameter EachAdjustable via Top CapFully Closeable Rounded Internal Top Cap Smooth Vapor DeliveryGold Plated 510 ContactProprietary Drip Tip8mm BorePackage ContentsRecoil Rebel 25mm RDAOne Snake Bite Interchangeable Top CapUltem Cotton TrapperSpare Part and O-Ring PackSpare Hex Screws

Recoil

Rebel RDA

C$79.99

1 Review

The Riot RDA by Anarchist & Digiflavor carries on the Anarchist tradition of combining creative designs with precision execution by implementing a spacious two-post build deck with dynamic side airflow. Leveraging the manufacturing prowess of Digiflavor, the Riot RDA measures 24mm in diameter with intricate machining with high quality metals and simplified designs. The wall sleeve is made of durable 304 Stainless Steel with two top cap options: Delrin and 304 Stainless Steel. The electroplated gold base houses a builder-friendly two-post design with the integration of a massive single 4mm by 3mm terminal opening on each post. Coil leads are placed on the terminal opening and top-secured via large Phillips screws for effective connection. The result is the capability to accommodate large coil structures and complex building configurations. The whole build deck is ceramic plated, providing exemplify cooling properties and stupendous flavor recreation. Airflow enters the structure through four staggered airslot windows on each side, fully adjustable that allows for maximal throttling to feed the atomizing chamber. Combining a versatile build deck with creative design elements from Anarchist and manufacturing expertise of Digiflavor, the Riot RDA is a top contender in the high-performance rebuildable segment.Product Features24mm 2-postLarge build spaceWide Bore drip tipGold plated brass 510 pinStainless screwsHybrid safePeek insulatorsWater plated gold baseBrass gold plated positive pinCeramic deck - holds more flavorDelrin top cap304 Stainless Steel cap#PunkAsFuck AirflowProduct FeaturesAnarchist Riot RDACaseAnarchist ScrewdriverCloud cap and regular capSpare parts bag

Anarchist

Anarchist Riot RDA

C$79.99

1 Review

The Striker is a sturdy, rebuildable dripping atomizer designed for versatility and ease of use. Machined from solid stainless steel by Greece mod maker Atmomixani, the Striker is sleek and well made. The tri-post design provides users the ability to easily build the Striker to run a single coil or dual coil, which are supplied with oxygen via the air holes that have been drilled into the top cap. Overall, the Striker generates intense flavors and copious amounts of vapor, while having an elegant appearance on your device.

The Striker for Nemesis will only fit Nemesis mods.

[b]Rebuildable atomizers are for advanced users only and should not be used by anyone without the knowledge of how to rebuild safely. All rebuildable atomizers should be tested carefully with a multimeter or ohm reader before use. Failure to test properly can result in physical injury. Please use at your own risk. This product does not come with any warranty.[/b]

Atmomixani Striker Atomizer for Nemesis

C$99.99

1 Review

The Iconic RDA by Vandy Vape was designed by YouTube Reviewer Mike Vapes and features a two post clamp design with staggered post holes for hassle-free coil installations. The Iconic RDA integrates direct side airflow slots and bottom airflow tubes for optimal flavour and is adjustable by rotating the top cap. In addition, the Iconic RDA features squonk mod compatibility and has a 7.5mm deep juice well.Product Features24mm DiameterStainless Steel Construction2 Post Clamp DesignDesigned For Dual Coil ConfigurationsStaggered Post HolesPEEK Insulator7.5mm Deep Juice WellApproximately 2ml E-Liquid CapacityDual Adjustable Side & Bottom AirflowDirect Airflow To Coil Alignment For Optimal FlavorSquonk Mod CompatibleAdjustable Gold Plated PinPackage ContentsOne Vandy Vape IconicRDAOne 810 Resin Drip TipOne 810 Delrin Drip TipOne 810 Frosted Drip TipOne Gold Plated 510 PinOne Gold Plated Squonking PinOne Spare Parts BagUser Manual

Vandy Vape Iconic RDA

C$44.99

1 Review

Manufactured in Greece by Atmomixani
Rebuildable Tank atomizer
Made from solid stainless steel
Filling through upper cap with any bottle
Airflow Control
Auto chamber closure when refill
Adjustable reverse-threaded 510 connector
Inner chamber engravement
Polycarbonate tube
Diameter: 22mm
Height: 53mm
Finish: Shined

Atmomixani Alpha RTA

C$174.99

1 Review

Due to the nature of manufacturing and design, each Hellvape x Heathen Dead Rabbit SQ 22mm RDA drip tip colours come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random. Hellvape introduces the Dead Rabbit SQ 22mm RDA, designed by Heathen; a 22mm, top terminal, two post build deck with gold plated positive posts and a 5mm deep juice well. The Dead Rabbit SQ RDA is capable of running single coil options and each terminal has side mounted hex or flathead screws, which are both included. Airflow enters the Dead Rabbit SQ RDA via top-side diagonal adjustable airflow which focuses on flavour, adjustable for MTL, and minimizes leaking. The airflow can be adjusted easily due to knurled grip. Included with the RDA is a 9mm wide bore 810 resin drip tip, a 9mm wide bore 810 Delrin drip tip, a 4mm bore 510 Delrin drip tip for mouth to the lung, and a 510 drip tip adapter for various drip tip styles and use. The Dead Rabbit SQ RDA comes pre-installed with a gold plated bottom feed pin but can be converted to a regular 510 pin. With its unique topside diagonal airflow and convenient to build on build deck, the Hellvape Dead Rabbit SQ 22mm RDA is a stylish, high-functioning bottom feeding rebuildable atomizer at an affordable price!Product Features22mm DiameterTop Terminal Two Post Build DeckSingle Terminal Per PostSingle or Dual Coil Options2mm Terminals Per PostSide Mounted Hex Screws or Side Mounted Flathead ScrewsGold Plated Positive Posts5mm Deep Juice WellDouble O-Ring SecuredPEEK InsulatorTop Side Diagonal Adjustable Airflow7mm by 2mm Each AirslotFocus on FlavorMinimizes LeakingFully CloseableAdjustable for MTLKnurled Grip To Adjust Airflow With Ease9mm Wide Bore 810 Resin Drip Tip9mm Wide Bore 810 Delrin Drip Tip Included4mm Bore 510 Delrin MTL Drip Tip510 Drip Tip Adapter IncludedGold Plated 510 ConnectionGold Plated Bottom Feed Pin304 Stainless Steel ConstructionPackage ContentsHellvape Dead Rabbit SQ 22mm RDAOne 9mm Wide Bore 810 Resin Drip TipOne 9mm Wide Bore 810 Delrin Drip TipOne 4mm Bore 510 Delrin MTL Drip Tip510 Drip Tip AdapterSpare Parts PackGold Plated Bottom Feed PinAllen Key

Hellvape Dead Rabbit SQ 22mm RDA

C$44.99

1 Review

The Rogue is a new, innovative RDA from Capitall Vape. It features an extremely unique top air flow control. Plus, it's leak-proof! The Rogue RDA includes three swappable top caps in stainless steel, copper, and brass. Just twist the top cap to adjust your air flow and enjoy flavor like you've never experienced before.

Specifications:

Made From 304 Stainless Steel
PEEK Insulators
22mm with deep engraved juice well
18mm tall (VERY short)
Copper center pin for maximum conductivity
Innovative Top Airflow Control Design - Leak Proof, and great flavor
Comes with Stainless Steel, Brass, and Copper AFC Rings to match your favorite devices
Flavor Chaser's Dream RDA
Made In USA

Capitall Vape

Rogue RDA

C$114.99

1 Review

This hole puncher is used for enlarging or adding additional holes to a DCTank Cartomizer. Enlarging or adding additional liquid flow holes will maximize the wicking of the DCTank Cartomizer. Be careful when punching holes because you can easily ruin the cartomizer if you create too many holes or to large of a hole.

Smoktech

Smoktech Hole Puncher for DCT

C$0.99

1 Review

The dotmod 24mm Petri 24K Gold Plated Postless RTA carries on the dotmod tradition of combining aesthetically beautiful designs with high performance features by integrating a postless quad terminal build deck. Integrating designs from the original 22mm RTA, this RTA measures 24mm in diameter with the entire chassis, including interior elements, being quadruple gold plated to provide a brilliant and durable finish. The 24mm Petri RTA is filled via a threaded top fill system and has a larger E-Juice capacity than its original design. Its build deck features a postless build deck that arranges four terminals in a square pattern for convenient mounting, with each terminal measuring 2.5mm by 2mm each. Included with the RTA are two proprietary wide bore drip tips--Acrylic and ULTEM--that thread into the top cap and have an 11mm inner bore. Airflow enters the RTA via two 17mm by 1.5mm airslots that are fully closeable by using the knurled airflow control ring. Combining a unique and versatile build deck with classy visual aesthetics, the dotmod 24mm Petri 24K Gold Plated Postless RTA is a wonderful contender for an RTA available today.Limited Edition Lost-Art RTA includes features such as: Re-designed chimney and thread so you no longer have to loosen the 510 pinSolid brass construction with 4 x 24K gold platingElegantly placed CZ stone in the center of the deckKnurled adjustable airflow ringSlightly larger postless deck for better build characteristicsImproved wicking holes for less likelihood of leaks and ease of wickingOpen tank design for easier fillingLarger tank capacity for more hours of enjoyment Serial # engraved on the top of the chimney 1-500Lost Art x Dot Mod authenticity card includedProduct Features24mm DiameterThreaded Top Fill SystemPour to FillPostless Build DeckFour Mounting Terminals2.5mm by 2mm EachSide Mounted Hex KeysUnified Wicking PortsDual 4mm by 3mm Airslots at Base of ChimneyChimney Threaded to BaseTightens Down Build DeckNotch CutoutsPEEK Insulated Positive Terminal PostsFull 24K Gold PlatingFour Times PlatedBrass Underlying MaterialKnurlingProprietary Wide Bore Drip TipsAcrylic11mm BoreThreadedULTEM11mm BoreThreadedKnurled Airflow Sleeve17mm by 1.5mm Each Airslot24K Gold Plated 510 ConnectionPackage Contentsdotmod 24mm Petri Postless RTASpare Glass Tank SectionProprietary Acrylic Wide Bore Drip TipProprietary ULTEM Wide Bore Drip TipSpare O-Ring and Parts PackPrebuilt Clapton Coil SetHex KeyNumbered certificate of authenticityLimited lifetime warranty on manufacturing defects

dotmod

dotmod x LostArt 24mm RTA

C$119.99

1 Review

Wotofo present the Bravo 25mm RTA with a redirected bottom airflow system, two post dual coil build deck, top fill capability, knurled design, and 4ml or 6ml E-Juice capacity. The Bravo features a unique redirected airflow system which brings air in from a dual adjustable bottom airflow control ring, and redirects the air up into the posts of the build deck where it exits parallel with the coil. This airflow system helps reduce leakage in comparison with traditional bottom airflow and offers enhanced flavor production. The build deck on the Bravo RTA is a two post design with two clamp style terminals per post to allow coil mounting for both forward and reverse wrapped coils; Installing flat coils are made easier due to the intuitive clamp post design. Juice enters the Bravo through a threaded top fill, and can accomidate 4ml of e-liquid with the standard glass tank section, or 6ml of e-liquid with the bubble glass tank section. The knurled design of the Bravo makes filling the tank or changing the airflow easier with the better grip it provieds. The Bravo also features a gold plated 510 contact, a Resin 810 drip tip, and a 510 drip tip adapter.Product Features25mm Diameter4.5ml Tank Capacity6ml with Bubble TankHigh Capacity Tank ReservoirThreaded Top FillTwo Large Fill PortsTwo Post Clamp Style Build DeckDual Coil Design2mm Terminal SlotsTop Mounted Phillips ScrewsPerfect for Flat WiresAirslots Built Into PostCentrally Located Between TerminalsTwo Stacked Slots Per Post6mm by 3mm EachDual 4mm Diameter Wicking PortsPEEK InsulatorDual Adjustable Bottom Airslot13mm by 3mmKnurled Design9mm Wide Bore Resin Drip Tip510 Drip Tip Compatible304 Stainless Steel and Glass ConstructionGold Plated 510 ContactDual Adjustable Bottom Airslot48.9mm by 25mmPackage ContentsOne Wotofo Bravo 25mm RTAOne Spare Standard Glass Tank SectionOne Bubble Glass Tank SectionOne Pack of Japanese CottonOne 510 Drip Tip AdapterPrebuilt CoilsSpare Parts PackUser Manual

Wotofo

Wotofo Bravo RTA

C$44.99

1 Review

The Grail transforms the Diver V2 from an RBA into an RDA (Rebuildable Drip Atomizer). It can hold up to 17 drops.

Made from Stainless steel 304L.

Dimensions : height 27.44mm , max diameter 14mm.

Weight 10.1g

NOTE : Not compatible with Diver V1

Atmistique Grail for Diver V2

C$44.99

1 Review

The Uwell Fancier RTA and RDA Tank is determined to push the edge in rebuildable technology, implementing a unique tank section combined with an intuitive build platform that can changed from RTA and RDA at ease. A follow-up to its dominant line-up in the Sub-Ohm Tank segment, Uwell spared no expense when crafting the Fancier RTA and RDA Tank. The base diameter measures 24mm in diameter, constructed with beautiful engravings made from Stainless Steel and a stylistic glass section that can hold up to 4 milliliters of e-juice. The design of the apparatus is different than traditional rebuildable tank, built with a central upper glass holder that houses wicking cotton and can be removed to transform the Fancier Tank into a squonk--ready RDA platform. To finish off the structure is a heat-resistant PEI widebore drip tip for a functional and visually striking impression. The gold-plated build deck features a tried-and-true two-post, dual terminals design that can accommodates a wide range of build configurations and complex wires. Airflow of the Fancier implements four external airslots throttled via knurled bottom base, redirects up into the two internal airtubes for excellent cooling properties. Carrying on the heritage of elite performance level systems and taking innovation one step further, the Uwell Fancier RTA and RDA Tank is machined to be one of the best all-in-one atomizer system available today.Product Features24mm Diameter4mL Juice CapacityHigh-Quality Stainless Steel ConstructionPyrex Glass ReinforcementElegant Grooved StructureUnique Central Piece Design - Spitback ProtectionCapable of Transforming into RDAGold-Plated Build DeckTwo-Post, Dual Terminal DesignSide-Secured via Hex ScrewsInnovative Downward WickingSingle or Dual Coil ConfigurationsThreaded Top-Fill Method - Large PortQuad External Bottom Airflow - Knurled DesignDual Internal Airtubes810 PEI Widebore Drip TipSquonk-Ready BF 510 PinGold-Plated 510 ConnectionAvailable in Stainless Steel, Black, Blue, Iridescent Rainbow, Sapphire Blue, Purple, GoldPackage Contents1 Fancier Atomizer1 RDA Top Cap1 Spare Glass Tube1 Squonk BF 510 Pin1 Tool Wrench1 Organic Cotton Pad2 Prebuilt Nichrome WiresSpare Screws and O-RingsInstructional Manual

Uwell Fancier RTA/RDA

C$54.99

The Aspire Cleito Sub-Ohm Tank brings one of the most unique coil and tank systems to date with the introduction of the Cleito Coil, replacing the typical static tank chimney, allowing for a direct to drip tip experience that increases flavor and vapor delivery. The Cleito Coil features a clapton styled coil that features full organic cotton in two configurations, with a 0.2 ohm coil that has a range of 55 to 70W and a 0.4 ohm coil that has a range of 40 to 60W. The coil design replaces the static chimney, greatly increasing effective cross sectional airflow with a minimum 25.5mm airflow allowance while outputting fantastic flavor and vapor efficiency. The full length coil structure also allows for the compact form factor to hold 3.5ml of liquid capacity while also implementing an easy top fill system. Dual adjustable airflow measures 9mm by 2mm each airslot, allowing for ample airflow. Manufactured out of 304 Stainless Steel and high quality glass, the Aspire Cleito Sub-Ohm Tank features an innovative coil design, well balanced features, and a highly competitive price point.Product Features22mm DiameterRevolutionary Full Length Coil DesignDrip Tip to Coil DesignEliminates and Replaces Static ChimneyIntense Flavor and Rapid Vapor Delivery25.5mm Cross Section AirflowCleito Coil StructureClapton Coil StructuresOrganic Cotton0.2 ohm55 to 70W0.4 ohm40 to 60W3.5ml Tank CapacityDual Adjustable Bottom Airflow9mm by 2mmTop Fill SystemGold Plated ContactColored 'Cuffs' IncludedStylize Your Tank304 Stainless Steel and Glass ConstructionFood Grade Delrin Drip TipProprietaryPackage ContentsOne Aspire Cleito Sub-Ohm Tank0.4 ohm Clapton Coil40 to 60W0.2 ohm Clapton Coil55 to 70WAdditional Glass Tank SectionSet of Cleito Cuffs

Aspire Cleito Tank

C$33.99

57 Reviews

Uwell returns in 2017 with the Crown 3, an evolutionary update to one of the most beloved Sub-Ohm Tank platforms in the history of our industry presenting a 24.5mm diameter chassis with a 5 milliliter max capacity and the new Crown III Parallel Coil Design. The Crown 3 measures 24.5mm in diameter and features sleek and smart design elements that combine for a universally appealing design. The Crown 3 features an Anti Leak Threaded Top Fill Method that unscrews to reveal dual 3.5mm by 6mm fill ports. The Crown 3 utilizes the new Crown 3 Plug and Pull Replacement Coil Family, with a threadless design that features reinforced seals to provide a liquid tight fit and finish. Each coil features a vertical coil arrangement and triple vertical wicking slots for rapid wicking. Three 11mm by 2mm triple adjustable bottom airflow makes for smooth and effective airflow, and can be fully closed to seal the system effectively. The Uwell Crown 3 Sub-Ohm Tank is an excellent midwattage tank with superior construction, a convenient Plug and Pull coil system, and ergonomic designs throughout.Product Features24.5mm Diameter Base5.0ml Max CapacityAnti Leak Threaded Top Fill Method3.5mm by 6mm Dual Fill PortsCrown 3 Plug and Pull Replacement Mechanism0.25 ohm SUS316 Parallel Coil80 to 90W0.5 ohm SUS316 Parallel Coil70 to 80WVertical Coil DesignPlug and Pull DesignThreadless DesignConvenient and Fast Coil Installation and ReplacementCrown 3 Key ToolCoil Changing and Tank CleaningPrecision Triple Adjustable Bottom Airflow11mm by 2mm EachStainless Steel ConstructionAvailable in Other FinishesQuartz GlassStainless Steel 510 Threading24K Gold Plated ContactPackage ContentsOne Uwell Crown 3 Sub-Ohm TankOne 0.25 ohm SUS316 Parallel Coil80 to 90WOne 0.5 ohm SUS316 Parallel Coil70 to 80WOne Replacement Glass Tank SectionSpare Parts PackUser Manual

Uwell Crown 3 III Tank

C$39.99

51 Reviews

Vandy Vape's Kylin RTA follows up on the critically acclaimed iCon and GOVAD RDA platforms, presenting a postless build deck, an expandable tank capacity for all day range, all paired with a dynamic airflow system. The Kylin RTA's ability to produce immense flavor and vapor production stems from its core, a gold plated postless build deck with quad air channels and large wicking cutouts. The pair of centralized air channels brings airflow beneath the coils, while the outer channels direct airflow around the side and up towards the domed chimney. Additionally, the airflow is controllable via the three position airflow control ring and divided into two separate sides by a PEEK splitter. The Kylin RTA comes as a 2ml compact tank system which is expandable to 6ml using the included chimney extension and extended glass section. Vandy Vapes keeps the user in mind by integrating knurling on the adjustable airflow control ring, adjustable juice flow control ring, and on the removable top cap for filling for ease of use. Following the iCon and GOVAD RDA's, the Kylin utilizes a 810 drip tip platform and includes three 810 drip tips as well as a 510 drip tip adapter. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomizer today, Vandy Vape's Kylin RTA enters the market as the premiere RTA of 2017 thus far.Product Features24mm Diameter Base 26mm at Widest PointThreaded Top Fill Design 2ml Standard Capacity6ml Maximum Capacity Chimney Extension and 6ml Glass IncludedPostless Quad Terminal Build Deck 3.5mm by 2mm Each TerminalSide Mounted Hex Screws6mm Space Between TerminalsTwo 3mm by 3mm Centralized Air ChannelsTwo 6.5mm by 2mm Outer Airslots Two Unified Wicking Port Cutouts 10mm by 4mm Each CutoutAdjustable Juice Flow ControlPEEK InsulatorGold Plated Build DeckDual Adjustable Airflow Three Positive Locking Positions 14mm by 2mm Each AirslotPEEK Splitter Divides into Two Sides24K Gold Plated 510 Contact304 Stainless Steel and Glass Construction810 Drip Tip 9.5mm Bore Delrin Drip Tip 13mm Outer Diameter11mm Bore Delrin Drip Tip 16.5mm Outer Diameter10mm Bore Delrin Drip Tip 18mm Outer Diameter510 Drip Tip AdapterPackage ContentsOne Vandy Vape Kylin RTAOne Chimney ExtensionOne Spare 2ml Glass SectionOne 6ml Glass SectionDrip Tip SetOne Hex KeySpare Part PackUser Manual

Vandy Vape Kylin RTA

C$44.99

18 Reviews

Uwell is proud to introduce the Crown 2 (II) Sub-Ohm tank which has many new quality of life improvements compared to the original Uwell Crown. The Uwell Crown 2 now has a convenient anti-leaking top fill feature which will help minimize leaks. The Uwell Crown 2 features a juice tank locking screw and an improved chimney design for stronger flavor. The Uwell Crown 2 utilizes atomizer heads with an all-new cone shape positive connector design for much smoother airflow.

Product Features:

○ 0.25Ω SUS316 Parallel Coil (60-100W)

○ 0.5Ω SUS316 Parallel Coil (50-80W)

○ 0.8Ω Kanthal Coil (35-55W)

● New Cone Shape Positive Connector for Smoother Airflow

● Juice Tank Locking Screw

● Improved Chimney Design for Stronger Flavor

● Convenient Anti-Leaking Top Fill Feature

● Adjustable Airflow Ring

● Removable Drip Tip

● Stainless Steel Construction

● Quartz Glass Tank

● Delrin Insulated Drip Tip

Package Contents:

● 1 x Crown II Atomizer

● 1 x Replacement Quartz Glass

C$29.99

17 Reviews

The Joyetech Ultimo Sub-Ohm Tank is the current generation performance flagship Sub-Ohm Tank platform from one of the most trusted brands in the industry, introducing the new MG series coil structure specifically designed for optimal airflow and wicking. The Ultimo measures 22mm in diameter and features a clean and trim design language that embodies Joyetech's universally appealing aesthetics. A simple and efficient threaded top fill system allows quick and easy filling of the 4 milliliter tank reservoir. The Ultimo is the first platform to utilize the MG series coils, specifically designed with a wider and shorter profile for optimal airflow travel through the coil as well as improved wicking area and reserve. Each coil features a 6mm diameter opening that matches the Ultimo chimney diameter, providing smooth and efficient airflow through the system. Quad 3.5mm wicking ports provide rapid and ample wicking to support high frequency use. Included with each kit is one 0.5 ohm Clapton and one 0.5 ohm Ceramic coil, rated for 40 to 90W and 40 to 80W respectively. Airflow enters through dual 12mm by 2.5mm airslots surrounding the base of the chassis, and travels only a short distance before entering the bottom of the vertical coil structures. Combining Joyetech's world class designs and manufacturing with the innovative and highly effective MG series coil structure, the Joyetech Ultimo Sub-Ohm Tank is truly a world class flagship system that truly stands out in the hyper competitive Sub-Ohm Tank market.

Product Features:

Joyetech

■Shorter Airflow Travel

■6mm Diameter Airflow

■Large Wicking Surface Area

■Quad 3.5mm Diameter Wicking Oirts

○ MG Clapton 0.5 ohm

■Vertical Single Coil Clapton

■40 to 90W

○ MG Ceramic 0.5 ohm

■Embedded Coil

■Ceramic Wicking Material

■Longer Life Span

■Purer Flavor

■Pure Cotton Auxiliary Wicking

■40 to 80W

● Dual Adjustable Airslots

○ 12mm by 2.5mm

○ Rapid Airflow Entry into Coil

■6mm Diameter Chimney

● Widebore Sleeved Drip Tip

○ SS and Delrin Included

○ 8mm Bore

● Stainless Steel and Glass Construction

Package Contents:

● 1x Joyetech Ultimo Sub-Ohm Tank

● 1x MG Clapton 0.5 ohm Coil

● 1x MG Ceramic 0.5 ohm Coil

● 1x Replacement Glass Tank Section

● Spare Parts Pack

● User Manual

Joyetech Ultimo Sub Tank

C$34.99

17 Reviews

The Aspire Cleito 120 Sub-Ohm Tank is the high wattage, performance orientated platform from the Cleito family, utilizing a larger chassis to accommodate the new Aspire Maxi Watt coil system capable of running up to 120W, unparalleled for a full chamber coil design. Maintaining many of the stylistic elements that made the Aspire Cleito Tank⁠ a smash hit, the Cleito 120 improves upon the top fill system by efficiently using the 11mm bore Delrin Top Cap, adding a full gasket seal underneath alongside a large fill slot that makes filling the larger 4 milliliter tank reservoir less cumbersome than the original. The new Aspire Maxi Watt coil deploys a clapton structure wicked by pure organic cotton, and is now rated at 0.16 ohms to allow for class leading output capability up to 120W. Like the original Cleito, the Maxi Watt coil design replaces the static chimney, greatly increasing effective cross sectional airflow while outputting fantastic flavor and vapor efficiency. Airflow has also seen a dramatic increase, moving to a three 11mm by 2mm design. Slotting in as the high performance variation of the extremely popular Cleito Sub-Ohm Tank, Aspire's Cleito 120 also implements thoughtful design revisions that greatly improve general use and maintenance, making it one of the best overall Sub-Ohm Tanks available on the market today.Purchase Replacement Aspire Cleito 120 Coils Here!Product Features25mm DiameterFull Length Coil DesignDrip Tip to Coil DesignEliminates and Replaces Static ChimneyIntense Flavor and Rapid Vapor DeliveryTop Fill System4ml Tank CapacityRevised SystemDelrin Top CapEasier to FillFull Gasket SealMaxi Watt Coil StructureClapton Coil StructureOrganic CottonLarge Triple Wicking Ports0.16 ohm100 to 120WTriple Adjustable Bottom Airflow11mm by 2mm Each304 Stainless Steel and Glass ConstructionFood Grade Delrin Drip TipProprietary11mm Bore24K Gold Plated 510 ConnectionPackage Contents1x Aspire Cleito 120W Sub-Ohm Tank2x 0.16 ohm Maxi Watt Coils1x Glass Tank SectionCleito Cuff

Cleito 120 Tank

C$34.99

17 Reviews

OUT OF STOCK

Employing the latest in flavor enhancing tank technology, Cleito EXO. Prepare to produce your own microclimate! New topside airway to bottom side chimney intake will take flavor and vapor production to next levels, as well as guaranteeing zero leaks. Top fill, easy to disassemble for ultra-low maintenance and convenience of everyday use. Utilizing the well-established Cleito coils, brings you storm clouds of flavor.Product FeaturesDimensions: 57*23.5mm3.5mL Tank CapacityStainless Steel ConstructionImproved Airflow SystemTop Airflow SlitsConvenient Top Fill MethodWide Bore Drip TipMetal ExoskeletonProvides Tank ProtectionTank Viewing WindowPackage Contents1 x Cleito EXO Tank1 x 0.16 Coil (Pre-Installed)1 x 0.4Ω Coil1 x Spare Drip Tip2 x Spare O-Rings1 x Warranty Card

Aspire Cleito EXO Tank

C$33.99

15 Reviews

Vandy Vape's Mesh RDA is a 24mm, dual invisible clamp style postless build deck that is compatible with both mesh wire and standard wires. Its unique dual invisible clamp style postless build deck has two 11mm terminals with side mounted flathead screws to secure the coil leads or mesh. Airflow enters the Mesh 24mm RDA via dual adjustable side airslots that can be utilized for either single or dual coil builds. Included with the Mesh RDA are two 9mm drip tips, one ULTEM and one Doc drip tip, a 510 drip tip adapter, and a bottom feed pin. The Mesh RDA offers a unique and versatile system for a new vaping experience!Product Features24mm DiameterCapacity1mLDimensions25mm x 24mmDrip Tip Dimensions7.4mm x 17.5mmEasy to buildMesh wire includedKA1 Mesh wire10x 40mm 80meshNi80 Mesh Wire10x 40mm 100meshSS316L Mesh Wire10x 40mm 150meshCompatible with both Mesh and Standard wireInvisible clamp style post less deckultem drip tip & doc tip includedPackage Contents1x Mesh RDA1x 18.5mm Delrin Doc tip1x Accessory bag3x KA1 Mesh Wire3x Ni80 Mesh Wire3x SS316 Mesh Wire

VandyVape

VandyVape Mesh RDA

C$34.99

14 Reviews

The SMOKtech TFV8 Baby Beast Sub-Ohm Tank redefines the compact form factor segment, introducing one of the most capable coil systems and performance profiles available in it's class, reducing overall size as compared to the full sized TFV8 by 30% while maintaining a 3 milliliter tank reservoir and introducing a class leading V8 Baby Coil Family. Maintaining the same 24.5mm diameter profile of the TFV8, the Baby Beast is 24% shorter in height with an overall 40% area reduction. Redesigning the coil and chassis, the tank reservoir manages to hold 3 milliliters total, filled via SMOKtech's signature Hinge and Lock Top Fill System. The Baby Beast Coil Family is based off of the high performance V8 line, retaining much of the same performance profile despite the diminutive size. Included with each kit is the dual coil V8 Baby Q2 Core, designed to be run between 40 to 80W as well as the octuple core V8 Baby T8 core, built for unparalleled class performance of 50 to 110W. Airflow enters the system through dual adjustable 13mm by 2mm airslots located around the base of the chassis, with a full 6mm bore from chimney to drip tip allowing for fantastic maximum airflow for the size. Effectively transferring the high performance characteristics of the critically acclaimed TFV8 platform to a more compact chassis, SMOKtech's TFV8 Baby Beast Sub-Ohm Tank is truly an engineering marvel when performance, size, balance, and price is taken into consideration.Product Features24.5mm DiameterHinge and Lock Top Fill SystemSwivels Open and ShutFill Port3.0ml Max Capacity30% Smaller ChassisAs Compared to the TFV8Smok TFV8 Baby Beast Replacement Coils⁠V8 Baby Q2 Coil Head0.2 ohmDual Coil40 to 80W Range55 to 65W Recommended RangeV8 Baby T8 Octuple Coil Head0.15 ohmPatented Octuple Coil50 to 110W60 to 80W Recommended RangeDual Adjustable 13mm by 2mm Airslots8.5mm Delrin Drip TipStainless Steel and Glass ConstructionPackage Contents1x SMOKtech TFV8 Baby Beast Sub-Ohm Tank1x V8 Baby Q2 Coil Head1x V8 Baby T8 Quadruple Coil Head1x Replacement Glass Tank SectionSpare Parts PackUser Manual

Smok

Smok TFV8 Baby Beast Sub-Ohm Tank

C$34.99

10 Reviews

Aromamizer RDTA (3ml/6ml) by Steam Crave

A brushed stainless steel rebuildable tank atomizer with a dripper chamber and three post design. This dual coil atomizer has four large ( 3mm ) adjustable air holes that feed directly into the side of the chamber. Adjustment of the air flow is performed with a band that can be removed if you prefer a wide open draw. Access to the build deck is simple and filling the tank is equally as simple just by removing the base from the body. The AROMAMIZER comes with a anti-spit back mouthpiece, but you can replace that with any standard 510 drip tip.

Specs

Brushed stainless steel
Dual coil build deck with 3 posts
Pyrex viewing window
Juice capacity 3ml or 6ml
510 connector with adjustable centre pole
Separate hex style grub screws for use in the posts (wrench included)
Spare Pyrex glass tank section
Comes boxed with full spares pack and mini-screwdriver

Approximate Dimensions:

Length: 45.1mm ( 3ml tank ) or 55.6mm (6ml tank)
Diameter: 23mm

Steam Crave

Aromamizer RTDA

C$39.99

10 Reviews

Designed by JayBo, this is Wismec's first drip tank hybrid featuring the new and exciting stainless steel NotchCoil. First to utilize an open wicking system, a combined top airflow juice plug and a solid leak proof sleeve design, JayBo and Wismec's innovative collaboration really shines through this unit. Removing the glass sleeve from the deck exposes the build area making it completely accessible and easy to install both cotton and coils. Removing the top airflow cap simultaneously exposes the fill port, allowing the user to easily refill the atomizer without conflicting with the set airflow settings.

Product Features:

Wismec

● 22mm Diameter

● Revolutionary Chassis Design

○ Open Wicking System

■Disassembly of Chassis Allows Easy Access

○ Top Airflow Juice Plug

■Sealed when Assembled

■Allows Filling without Airflow Alteration

■4mm Fill Hole

■Top Airflow Minimizes Leaking

■10mm by 3mm Airflow

■Enters Through Back of Build Deck

○ Single or Dual Top Airflow Rings

■Curved 11mm by 3mm Top Airflow

● Split Positive Build Deck

○ Single Terminal Positive Post

■Allows Use with Stainless Steel NotchCoil

■5.5mm by 2mm Opening

○ Dual Negative Posts

■Single Terminal

■2mm Diameter Terminals

○ Allows for Single and Dual Coil Configurations

○ Hex Keyed

● NotchCoil Structure

○ Specially Designed Stainless Steel Pattern

○ Easily Wicked

○ Great Performance and Durable

○ 0.25 ohm

■30 to 70W

■SS316

● Two Tank Options Included

○ Full Glass Tank Section

○ Stainless Steel and Glass Tank Section

■Superior Durability

■Reduced Visibility

● Gold Plated 510 Connection

Package Contents:

● 1 x Theorem Atomizer

● 2 x Airflow Control Rings (Single & Dual)

● 1 x Stainless Steel Lined Glass Sleeve

● 1 x Glass Sleeve

● 2 x NotchCoil With Cotton

● 3 x Silicone O-Rings

● 4 x Screws

● 1 x Allen Key

● 1 x User Manual

Wismec Theorem RTA by JayBo

C$39.99

9 Reviews

Uwell Rafale Parallel Coil Sub-Ohm Tank

The Uwell Rafale Sub-Ohm Tank is the successor to one of the most popular Sub-Ohm Tanks, the Uwell Crown, and features a 5ml tank capacity coupled with a patented top fill system, dual parallel coil structures with a maximum wattage of 120W, precision cut adjustable airflow, and a highly effective anti spitback system. The Rafale features a patented top fill system which is directly opened and closed via the drip tip. When twisted in a counter clockwise direction one and a half revolutions and with the bottom airflow shut off to ensure minimal leaking, the user is then able to use one of the two fill ports to fill the top. Sealing the top is then done in the same manner, turning the drip tip in a clock wise direction to seal the tank section. With a properly gauged nozzle, filling is done extremely quickly and efficiently. Filling the Rafale can also be done in a more traditional bottom method, with two wide crescent ports allowing for high flow into the tank section. Airflow of the rafale features dual precision cut airslots that click into place, with an astounding 3mm height at the highest point and 15mm wide at it's widest point. The design feeds directly and quickly into the coil base, allowing airflow to rapidly enter the system that allows for a near unmatched rate of delivery. An anti spitback mechanical system is put into place within the chimney, providing an effective barrier that dramatically decreases spitback from occurring, trapping e-juice at the base of the chimney

Product Features:
24mm Diameter
Patented Uwell Top Fill System
Bottom Fill Capable
5ml Tank Capacity
0.2 ohm Parallel 316 Stainless Steel Coil Structure
120W Max Power Output
Organic Cotton Wicking
0.5 ohm Parallel 316 Coil Structure
Dual Precision Cut Adjustable Airflow Control
Patented Uwell Anti Spit Back System
Food Grade Stainless Steel Construction
Quartz Glass

Replacement Coils for the Uwell Rafale:
0.1ohm Ni200 (Nickel)
0.2ohm
0.5ohm

Uwell Rafale Parallel Coil Tank

C$24.99

9 Reviews

The SMOKtech TFV8 Big Baby Beast Sub-Ohm Tank combines the best elements of two of the most popular and critically acclaimed tanks today, packing in the manageable size and affordable performance coil family from the Baby Beast with the capacity and range of the full sized TFV8. Maintaining the same 24.5mm diameter profile of the TFV8 and measuring just 3mm taller in height than the Baby Beast, the Big Baby Beast packs in a rangy 5 milliliter tank capacity accessed and filled via SMOKtech's signature Hinge and Lock Top Fill System. The Baby Beast Coil Family is based off of the high performance V8 line, retaining much of the same performance profile despite the diminutive size. Included with each kit is a trio of coil heads, featuring the V8 Baby X4 Coil Head, V8 Baby T6, and the V8 Baby RBA Head. Airflow is expanded, increasing each airslot to measure 15mm by 2mm which are located around the base of the chassis, with a full 8mm bore from chimney to drip tip. SMOKtech's Big Baby Beast enters the market as the prime combination of SMOKtech's two best Sub-Ohm Tank platforms, asserting itself as the premiere atomizer available today.Product Features24.5mm DiameterHinge and Lock Top Fill SystemSwivels Open and ShutFill Port5.0ml Max CapacitySMOKtech Baby Turbo Coil FamilyV8 Baby Q2 Coil Head0.2 ohmDual Coil40 to 80W Range55 to 65W Recommended RangeV8 Baby X4 Coil Head0.15 ohmQuadruple Coil30 to 70W45 to 60W Recommended RangeV8 Baby T8 Coil Head0.15 ohmOctuple Coil50 to 110W Range60 to 80W Recommended RangeV8 Baby T6 Coil Head0.2 ohmSextuple Coils40 to 130W70 to 90W Recommended RangeV8 Baby RBA HeadTwo Post Dual Terminal Design2mm Diameter TerminalsDual 6mm by 3mm Internal AirslotsQuad 4.5mm by 2.5mm Wicking SlotsPrebuilt Dual Clapton Coil30 to 60WIncludes Glass Tank Section and Spare PartsDual Adjustable 15mm by 2mm Airslots8.5mm Delrin Drip TipStainless Steel and Glass ConstructionPackage Contents1x SMOKtech TFV8 Big Baby Beast Sub-Ohm Tank1x V8 Baby X4 Coil Head1x V8 Baby T6 Quadruple Coil Head1x V8 Baby RBA Head1x Replacement Glass Tank SectionSpare Parts PackUser Manual

Smok

Smok TFV8 Big Baby Beast Sub-Ohm Tank

C$44.99

8 Reviews

Innokin with the collaboration of Phil Busardo and Dimitris Agrafiotis, features the Ares MTL RTA, a two post single terminal build deck, a smoked glass tank section, and a convenient push to open top fill design. The Ares RTA's ability to produce immense flavour and vapour production stems from its core, a rounded bell chamber for an easy fill, smooth flavour, and reduced air turbulence. The air port diffuser distributes the air evenly through the coils ensuring the air travels to the top of the bell through the reduced chimney design for the perfect flavour and throat hit. The Ares comes as a 4ml compact tank system which can be switched out for a smoked glass section. Juice enters the Ares through a push to open top fill for convenience and ease of use. The Ares utilizes either a wide bore drip tip or a narrowed bore drip tip. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomizer today, Innokin's Ares MTL RTA enters the market as a strong mouth-to-lung RTA that boasts great flavour and convenience.Product Features24mmPush to Fill System4ml E-Juice CapacityTwo Post, Single Terminal Build DeckSide Mounted ScrewsDual Wicking PortsDual Adjustable Bottom AirslotsGold Plated 510 PinPackage ContentsOne Innokin Ares RTAOne 3ml Glass SectionOne Smoked Tank SectionDrip Tip SetOne Hex KeyOne 1M of WireTwo Pre-built CoilsSpare Part PackUser Manual

Innokin

Ares MTL RTA by PBusardo and Vapingreek

C$49.99

8 Reviews

The FreeMax Starre Pro Sub Ohm Tank uses Dual Vertical Coils that contain 100 % Organic Japanese Cotton. Freemax Starre Pro Sub Ohm Tank Fact and Feaures 100% 304 Stainless Steel Design Top Fill e liquid design Ni200 Temperature Sensing Wire (Nichrome) (2) Huge cyclops style adjustable airflow inlets 510 Drip Tip with AFC Airflow Control Anti Leak Design Pyrex Glass Tank Ni200 Coil Heads 0.15 / 0.25 Ohm 100% Japanese Organic Cotton Enhanced Vapor and Flavor Output Compatible with the Original DVC Kanthal Coils Measuring 22mm in Diameter 4 ml E liquid Capacity

Freemax

Freemax Starre Pro Sub-Ohm Tank

C$39.99

8 Reviews

The Maze Sub-Ohm BF RDA by Vandy Vape deploys an innovative functionality to the rebuildable segment, presenting an innovative Maze Coil with a radial, horizontally flat design with a wide surface area. Creatively constructed for a more dynamic vaping experience, the new Maze Coil is integrated with 316L Stainless Steel "maze" wires and Japanese Cotton with an atomizer rating of 0.2ohm and a recommended range of 50 to 100W. The design is fully replaceable like a Sub-Ohm coil for convenience, with the added benefit of an enormous surface area similar to a 'stove-top' for amazing flavours and vapour production. The Maze RDA can be refilled through two methods: a squonk-ready pin to be utilized with a BF squonk mod or through a central filling tube for traditional 510 pin set-up. Airflow enters the structure through four sets of 9 tiny airflow holes that are fully adjustable. A brand-new structure introduced into the market, the Maze BF RDA by Vandy Vape is set to be a phenomenal hit in the squonk RDA segment.Product Features24mm Diameter2mL Juice WellSuperior 303 Stainless Steel ConstructionUnique Maze Coil Structure - Horizontally Flat100% Japanese Cotton0.2ohm SS316L Maze Coil - rated for 50-100WDistinctive Side Airflow Delivery - Four Tiny 9-Hole SlotsCentral Filling TubeOptional Squonk-Ready Filling Method - Requires Squonk Mod810 Resin Widebore Drip TipSquonk-Ready 510 PinGold-Plated 510 ConnectionAvailable in Stainless Steel, Black, Gold, RainbowPackage Contents1 MAZE BF RDA2 0.2ohm SS316L Maze Coils1 Resin Widebore Drip Tip1 Traditional 510 Pin1 Squonk-Ready 510 Pin1 Refill Tube1 Accessory BagInstructional Manual

Vandy Vape Maze SUB OHM BF RDA

C$29.99

7 Reviews

HorizonTech introduces their Falcon Sub-Ohm Tank, a 25.2mm diameter, 5ml E-Juice capacity tank, with a threaded top fill system, POM drip tip, and an entirely unique coil system. HorizonTech introduces their new coil for the Falcon Sub-Ohm Tank, the F1 coil, which is a 0.2 ohm parallel coil head, rated at 80W, with a liquid guiding element of 70% organic cotton and 30% wood pulp, the F2 coil, which is a 0.2 ohm parallel coil head, rated at 80W, with a liquid guiding element of natural flax fiber, the F3 coil, which is a 0.2 ohm parallel coil head, rated at 70W, with a liquid guiding element of flax fiber and flax paper, and finally the M1, a 0.15 ohm mesh coil head, rated at 70W, with a liquid guiding element of 70% organic cotton and 30% wood pulp. Airflow enters the Falcon Sub-Ohm Tank via dual adjustable bottom airslots measuring at 14mm by 3mm each and can be fully closed. Included with the Falcon Sub-Ohm Tank is a 7mm bore proprietary delrin drip tip and a spare parts pack. HorizonTech's Falcon Sub-Ohm Tank is new and intuitive yet maintains much of the same functionality that made the tank so renowned.Product Features25.2mm DiameterThreaded Top Fill SystemTwo Fill Ports5ml Maximum Tank CapacityHorizonTech Falcon Coil FamilyVertical Coil OrientationF1 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding Element70% Cotton and 30% Wood Pulp80WF2 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding ElementNatural Flax Fiber80WF3 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding ElementFlax Fiber and Flax Paper70WM1 Falcon Coil0.15 ohmMesh CoilsLiquid Guiding Element70% Cotton 80% Wood Pulp70WDual Bottom Airslots14mm by 3mm EachFully Closable11mm Bore 510 Delrin Drip Tip8mm Bore 510 Resin Drip TipResin At RandomGold Plated 510Stainless Steel and Glass ConstructionPackage ContentsOne HorizonTech Falcon Sub-Ohm TankOne 0.2 ohm F1 Falcon Coil CoilOne 0.15 ohm M1 Falcon CoilOne 11mm Bore 510 Drip TipOne 8mm Bore 510 Resin Drip TipResin At RandomSpare Glass Tank SectionSpare Parts Bag

Horizon Tech

HorizonTech Falcon Sub Ohm Tank

C$39.99

7 Reviews

The SMOK TFV12 Prince Sub-Ohm Tank enters the market as the most capable Sub-Ohm Tank ever released, headlined by the extraordinary 120W maximum range of the V12 Prince-T10 Decuple Coil Head, presenting unprecedented vapour and flavour possibilities. Following up on the world's most popular Sub-Ohm Tank of 2016 with the TFV8 platform and its smaller editions, the TFV12 Prince elevates the vape tank segment even greater, capable of outputting an incredible 120W maximum with the Prince-T10 coil. The chassis design of the TFV12 Prince features multiple diameters, measuring 25mm at the base and 28mm at the widest point. The new press to open Top Fill System that isn't featured from the previous editions is fully implemented into the TFV12 Prince, with a single fill port and a maximum tank capacity of 8 millilitres. The new SMOK TFV12 Prince Core Family brings the world class and industry leading coil designs implemented in the TFV12 Cloud Beast series to another level, headlined with the T10 Decuple Coil Head that features an unprecedented range of 60 to 120W. Alongside the T10 are the V12 Prince versions of the popular Q4 coils found with the TFV8, featuring an extended range of 40 to 100W and the new V12 Prince-X6 that ranges from 50 to 120W, respectively. Airflow for the TFV12 Prince is configurated around the base of the chassis, providing ample airflow even for the maximal range of the atomizer. Heralding in the newest generation of SMOK atomizers, the TFV12 Prince Sub-Ohm Tank makes a bold but accurate assertion as the premiere cloud chasing tank on the market.Product Features25mm Diameter Base28mm at Widest PointHinge and Lock Top Fill SystemSwivels Open and ShutFill Port5ml Max Standard Capacity8ml Max Convex Glass Extension CapacitySMOK V12 Prince Coil FamilyV12 Prince-T10 Decuple Coil Head0.12 ohmPatented Decuple Coil60 to 120W Range80 to 110W Recommended RangeV12 Prince-X6 Sextuple Coil Head0.15 ohmPatented Quadruple Coil50 to 120W80 to 100W Recommended RangeV12 Prince-Q4 Quadruple Coil Head0.4 ohmPatented Quadruple Coil40 to 100W60 to 80W Recommended RangeCompatible with Additional V12 Prince CoilsDual Adjustable AirslotsStainless Steel and Glass ConstructionPackage ContentsOne SMOK TFV12 Prince Sub-Ohm TankOne V12 Prince-T10 Ducuple Coil HeadOne V12 Prince-X6 Sextuple Coil HeadOne V12 Prince-Q4 Quadruple Coil HeadOne Replacement Glass Tank Section5mlOne Convex Bubble Tank Glass Tube6mlSpare Parts PackUser Manual

Smok

Smok TFV12 Prince Sub-ohm Tank

C$44.99

6 Reviews

Syntheticloud Tech

Aeolus V2 Pro - Black

C$74.99

6 Reviews

The Coil Art Mage 24mm GTA is built off of the performance orientated Mage platform and is specifically designed towards flavor centric production and output, with a two post midsection build deck with notch style terminals. The Mage GTA measures 24mm in diameter and 47mm in overall height, bringing in the similar dimensions to the original Mage 24mm RTA. Filling is done via a threaded system that is built into the delrin top cap that opens up to dual fill ports. The two post build deck is positioned to sit in the middle of the tank reservoir and features a dual notch terminal design that features side mounted Phillips Screws and high siding for additional build flexibility. Dual 4mm half circle wicking ports allow for great wicking, while the Mage 24mm GTA's deck is fully 24K Gold Plated for more conductivity while bringing a more visually appealing presentation. Airflow of the GTA features an adjustable triple airslot design, with each airslot measuring 10.5mm by 1.5mm, allowing users to run high powered single coil configurations if desired. Maintaining the legacy of high performance from the original Mage series, Coil Art's Mage 24mm GTA is a great solution for users wanting a more robust flavor specific platform.Product Features24mm DiameterDimensions47mm x 24mm3.5ml Tank CapacityHigh Capacity Tank ReservoirThreaded Top FillTwo Post Midsection Build DeckSingle Coil DesignNotch Style TerminalsSide Mounted Phillips ScrewsHigh Notch Siding4mm Dual Half Circle Wicking PortsCentral 4.5mm Internal AirholePEEK Insulator24K Gold Plated DeckTriple Adjustable Bottom Airslots10.5mm by 1.5mm Each AirslotCan Fully Close11mm Bore Delrin Threaded Drip Cap304 Stainless Steel and Glass ConstructionGold Plated 510 ContactPackage Contents1x Coil Art Mage 24mm GTASpare Glass Tank SectionSpare O-Ring and Screws Pack1x Phillips ScrewdriverUser Manual

CoilART

CoilART Mage GTA

C$44.99

6 Reviews

The GOVAD RTA by Vandy Vape follows up on the premiere, builder's orientated GOVAD series, deploying a spring-loaded two-post design with clamp-style mechanism and a tremendously intricate bottom airflow system with three-directional air delivery in the chamber. The chassis design of the GOVAD RTA measures 23.7mm at the base and 26mm at the widest point, all precisely machined with knurled top cap and bottom base for efficient adjustment. The GOVAD RTA features a standard 2mL juice capacity, which is expandable to 4mL when removing the chimney block for extended range and versatility. The user-friendly build deck provides unprecedented possibilities, integrating a two-post design with spring-loaded components and secured via clamp mechanism. Coil leads are inserted on the terminals in an efficient manner, allowing tremendous compatibility with large coil structures and exotic builds. The entire build deck as well as the internal bottom airhole is 24K Gold-Plated, catering to a flavor-orientated system especially combined with the single coil configuration. Airflow enters the structural through dual external airslots with adjustable feature located around the base of the GOVAD RTA. When air channels funnels into the structure, it redirects to the chamber through two centralized bottom air tubes and two slanted side airslots. When set in full airflow mode with the utilization of the 3D side airflow, the coverage within the chamber is unparalleled compared to other high-power configurations. The adoption of ULTEM widebore drip tip provides ready-to-use performance right out of the box. Beautifully constructed with one of the most intuitive airflow system and highly effective build deck, the Vandy Vape's GOVAD RTA is a worthy competition for the best rebuildable tank platform in the industry.Product Features23.7mm Base Diameter26mm Diameter at Widest Point4mL Maximum Juice Capacity - Removal of Block2mL Standard Juice CapacitySuperior Stainless Steel ConstructionPyrex Glass Reinforcement24K Gold-Plated Build DeckUnique Clamp-Style Two-Post Design Centrally Secured via Phillips-Screws Spring-Loaded Clamps for Easier Set-UpDual External Adjustable AirflowThree-Directional Chamber AirflowDual Centralized Internal Air TubesDual Slanted Internal Airslots Juice Flow ControlConvenient Threaded Top-Fill DesignULTEM Widebore Drip Tip14mm Wide Delrin Widebore Drip Tip510 Drip Tip AdapterGold-Plated 510 ConnectionPackage Contents1 GOVAD RTA1 14mm Delrin Widebore Drip Tip1 510 Drip Tip Adapter1 Replacement Glass TubeSpare Parts & Screws

Govad RTA

C$44.99

5 Reviews

iJoy, the makers of the Combo RDTA, now brings you their Combo RDA--a 25mm, screwless two post build deck with spring loaded terminals. Each terminal has a 2.5mm by 3mm clamping space that can accommodate various types of builds and the 9mm deep juice well allows for more E-Juice to be retained within the rebuildable dripping atomizer. The Combo RDA's deck is 24K gold plated for higher conductivity and the PEEK insulation minimizes heat transfer and is high performance oriented. Airflow enters the Combo Screwless Two Post 25mm RDA via dual adjustable bottom airflow with airslots measuring 10mm by 2mm each. A 10mm wide bore 810 ULTEM drip tip is included with the RDA, as well as a pair of prebuilt coils and a post compression tool to assist with building. iJoy's Combo Screwless Two Post 25mm RDA is an innovative and affordable rebuildable atomizer that is on the market today!Product Features25mm DiameterScrewless Two Post Build DeckSpring Loaded Terminal2.5mm by 3mm Clamping Space9mm Deep Juice Well24K Gold Plated DeckPEEK InsulationMinimizes Heat TransferHeat ResistantHigh Performance OrientedDual Adjustable Bottom Airflow10mm by 2mm Each AirslotFully Closeable10mm Wide Bore 810 ULTEM Drip TipPost Compression ToolStainless Steel ConstructionGold Plated 510 ConnectionPackage ContentsOne iJoy Combo Screwless Two Post 25mm RDAOne 10mm Wide Bore 810 ULTEM Drip TipOne Pair Prebuilt CoilsPost Compression ToolSpare Parts Pack

iJoy

iJoy Combo Screwless 2-Post 25mm RDA

C$34.99

4 Reviews

Kanger Pangu Clean Hands Sub-Ohm Tank is the newest budget orientated Sub-Ohm Tank from the makers of the ProTank 4 and the TOPTANK series, implementing the full chamber PGOCC coil alongside the convenient Clean Hands System. The Pangu measures 22mm diameter and packs in 3.5ml in tank capacity filled by removing the top cap. The PGOCC structure runs the entire length of the tank and is sleeved by the included drip tip. Removing the drip tip allows users to twist the coil itself to adjust wicking port exposure, making adjustment simple and easy. The full chamber coil design allows for a direct to user airflow experience, with a full 8mm bore from coil to tip, removing any airflow obstructions. Included with each Pangu set is a 0.5 ohm SUS316L Coil rated for 15 to 50W while a more flavor orientated 1.5 ohm NiChrome coil is intended to run between 10 to 26W. The new Clean Hands system allows users to insert and replace each PGOCC with relatively minor disassembly of the chassis, expediting the process of coil replacement. Dual airslots at the bottom of the chassis measure 14mm by 2mm, providing ample airflow, while the chassis is constructed out of quality stainless steel and glass. Presenting a clean overall aesthetic with flexible coil offerings, Kanger's Pangu Sub-Ohm Tank is a great budget orientated option with a well balanced performance profile.

Product Features:

Kanger

● 22mm Diameter

● 3.5ml Tank Capacity

● Top Fill Capability

○ Threaded

○ Double O-Ring Sealed

○ Wide Filling Area

● PGOCC Coil

○ Full Chamber Coil Structure

○ Controllable Wicking Exposure

○ Vertical Coil Structure

○ Clean Hands System

■Can Remove Without Handling Liquid in Reservoir

○ Direct to Drip Tip Design

○ Full 8mm Bore

● Dual Dual Airslots

○ 14mm by 2mm

● Stainless Steel and Glass Construction

Package Contents:

● 1x Kanger Pangu Sub-Ohm Tank

● 1x 0.5 ohm PGOCC Coil

● 1x 1.5 ohm PGOCC Coil

● Additional Pyrex Glass Tank

● 1x User Manual

Kanger Pangu Clean Hands Tank

C$24.99

4 Reviews

VGOD's TrickTank Pro RDTA is purpose build for serious vapers and tricksters, providing a flagship platform with tremendous range and capability geared towards heavy vapor and flavor production and a unique and useful pressured tank reservoir system that ensures rapid and efficient wicking. The TrickTank Pro measures 24mm in diameter and 36mm in height, presenting a performance ready platform built for high wattage applications. Inside, the build deck measures 20mm in workable space, with a two post dual terminal per post design that integrates 2mm diameter squared terminals for convenient coil mounting. The VGOD TrickTank Pro utilizes a unique pressurized tank system with an overall capacity of 4ml and is filled via a 2.5mm side hole for convenient filling. When the top section is placed upon the tank, the gasket surrounding the fill hole effectively seals the system, and the added pressure ensures a more effective system in regards to wicking. Airflow enters the TrickTank Pro's chamber through two 10mm by 3mm exterior airslots which funnel into four 3.5mm by 3mm internal airholes within the build chamber. Coupled with the threaded 11mm wide bore drip top, the TrickTank Pro provides excellent maximum overall airflow for optimum vapor production. Included with each kit is a Coil Feenz Build Kit that features 2 3mm Fused NiChrome TMN80 Clapton Coils that users can mount and configure with the TrickTank Pro for top tier out of the box performance. Aggressively designed to meet the high level of performance needs of the VGOD team, the TrickTank Pro Two Post RDTA is a high performance system that combines excellent range with effective and innovative designs that firmly place this atomizer as one of the premiere in it's class.Product Features24mm DiameterTwo Post Build DeckDual Terminal Per Post2mm Diameter TerminalsSquared TerminalsSide Mounted Flathead Screws19mm Post Distance20mm Internal DiameterPEEK InsulationQuad Wicking Ports4mm Diameter EachGold Plated PositivePressurized Tank4ml Tank Capacity2.5mm Side Fill HoleGasket Sealed to Create PressureAids in WickingGuided Cutout Tank SectionEnsures Proper FitmentDual Direct Airflow10mm by 3mm Exterior AirslotsQuad 3.5mm by 3mm Internal AirholesThreaded Widebore Top Cap11mm BoreStainless Steel and Glass ConstructionIncludes Clear and Smoked Glass Tank Section24K Gold Plated Copper PostsPackage ContentsOne VGOD TrickTank Pro RDTAOne Coil Feenz Build KitClapton TMN80 NiChrome CoilsOne Smoked Glass Tank SectionSpare Tank Seal and Screw Pack

VGOD

VGOD TrickTank Pro 2-Post RDTA

C$94.99

3 Reviews

Vandy Vape's Mesh RTA is a 24mm, dual invisible clamp style postless build deck that is compatible with both mesh wire and standard wires. Its unique dual invisible clamp style postless build deck has two 11mm terminals with side mounted flathead screws to secure the coil leads or mesh. Airflow enters the Mesh 24mm RTA via dual adjustable side airslots that can be utilized for either single or dual coil builds. Included with the Mesh RDA are two 9mm drip tips, one ULTEM and one Doc drip tip, a 510 drip tip adapter, and a bottom feed pin. The Mesh RDA offers a unique and versatile system for a new vaping experience!Product Features24mm DiameterCapacity2mL / 4mLDimensions39mm x 24.4mmEasy to buildMesh wire includedInvisible clamp style post less deckultem drip tip & doc tip includedPackage Contents1x Mesh 24 RTA1x 17.5 Ultem Drip Tip1x 18.5mm Delrin Doc tip1x Accessory bag1x Replacement Glass2x SS316L Mesh Wire 3002x SS316L Mesh Wire 400

VandyVape

VandyVape Mesh 24 RTA

C$44.99

3 Reviews

The Tugboat Atty Canada Edition with included drip tip from Flawless

- Stainless steel construction

- 22mm outer Diameter

- 3 post design

- Large drip well

- Flush mounted cap

- Large airholes

- Heat resistant drip tip with serial and tugboat engraving

- Tugboat and American Flag engraving

Tugboat RDA by Flawless Canada Edition

C$74.99

3 Reviews

Introducing the CRYPTEX Rebuildable Atomizer by JPGE. It’s is the following up to the highly popular Nimbus atomizer. If you liked what the NIMBUS Atomizer brought you, the Cryptex will take you to a whole new vaping nirvana. We see the addition of an easy to use and effective AFC ring, domed chamber for great flavour production, generous juice well, external fin like heatsinks to help keep temperature to a minimum and the return of spitback protection.

Features:

- 304 Stainless Steel
- 3 Piece Design
- Tri-Pole
- Heatsink
- Spitback Protection
- Adjustable Airflow (Dual Adjustable Airholes)
- 22mm Diameter
- Two-tone texture in one Atomizer (Polished and Brushed Metal)
- Taller poles than the Nimbus Atomizer
- Phillips head screws

JPGE

JPGE Cryptex

C$59.99

3 Reviews

Production RDA by Flawless

A more affordable line by Flawless, same great quality you have come to expect and trust from Flawless

Features:

- 22mm deck
- 3 Post design
- adjustable airflow @ 10:30 and 4:30
- Peek insulator
- Made In USA
- Deep Well

Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.

Production RDA

C$49.99

3 Reviews

The Wismec IndeReserve RDTA is Jay Bo's revisioning of the now iconic removable center barrel RDTA concept, packing in the signature Inde series adjustable top airflow and T Post build deck alongside a sizeable 4.5ml tank capacity and a full height sleeve. Measuring 25mm in diameter, the IndeReserve features the Inde series styling and design language, with clean and distinct lines and curves. The threaded center shield is raised higher than the build posts and measures a solid 1.5mm thick, effectively reducing the chamber for denser flavor while allowing for the rest of the chassis to remain a uniform 25mm in order to pack in the 4.5ml tank capacity. Integrated into the sleeve is a 9mm by 3.75m side fill port that allows for convenient and quick filling with minimal disassembly. Airflow of the IndeReserve follows in line with the Inde series, with two curved 11mm by 2mm top airslots that feed directly down into the deck adjusted by cutouts in the top section of the cap. The build deck features a T Post assembly with four 2mm diameter terminals in total, with the unique arrangement allowing for a variety of coil arrangements. Four wicking ports, which are more easily accessed with the removal of the shield, provide optimal maximum wicking. Included with each IndeReserve is the new spaced 0.5 ohm Clapton Coil, ready to assemble. configure, and wick, that provides excellently balanced performance. Taking the acclaimed Inde platform and updating it to the demands of the current day user, Wismec and Jay Bo Design's IndeReserve RDTA is a highly affordable flavor orientated system that matches perfectly with the RX line.Product Features25mm DiameterUnique T Post Arrangement'T' Post Positive2mm Diameter TerminalsDeck Milled Negatives2mm Diameter TerminalsAllows for Vertical or Offset Coil ArrangementsPEEK InsulatorSide Tensioned Applied Grub ScrewsThreaded Center ShieldSurrounds Build DeckRemoves for Easy Wicking9mm by 3.75mm Side Fill HoleConvenient Filling4.5ml Maximum Tank CapacityDual Adjustable Top AirslotsCurved 11mm by 2mmHeat Fin DesignFriction Fit 11mm Bore Delrin Drip TipWismec A1 Clapton Coil0.5 ohmsSuperior Heating PatternSpacedStainless Steel 510 ConnectionEngraved Bottom and SidePackage Contents1x Wismec IndeReserve T Post RDTAAdditional Spare Parts BagSpare Glass Tank SectionClapton Coil Pair

Wismec

Wismec Indereserve T Post RDTA

C$34.99

2 Reviews

Vandy Vape's and Alex from VaporsMD introduces the Phobia 24mm BF RDA, a bottom fed capable dripping atomizer with a post-less quad terminal style building deck, a dual centralized airflow system, measuring at 24mm diameter and dual or single coil capability. The Phobia has a 5mm deep juice well with centralized juice splitter for even juice distribution, as well as dual centralized airflow system located on the build deck for a smooth inhale. The Phobia has a post-less deck that features four terminals, the coil is held down through Philip screws located on the sides, making the Phobia easy to build. The Phobia uses the popular 810 drip tip system and comes with an ULTEM wide bore drip tip, a separate top cap that fits a proprietary 810 drip tip, and 510 drip tip adapter (The Black Finish of the Phobia only comes with a Delrin Drip Tip and Drip Cap). The golden 510 pin can be changed to a squonk-ready pin for any bottom feeding device. The Vandy Vape Phobia 24mm BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.Product Features24mm DiameterPostless Quad Terminal Style Build DeckOuter Terminals3mm Per TerminalsCoils Held Down by Philip ScrewsPEEK Insulator5mm Deep Juice WellGold Plated ScrewsJuice Flow Splitter in CenterDual Center Airlfow3mm by 2mm Center Airflow Slots3mm by 3mm Side Airflow SlotsBottom Airflow Design14mm by 2mmFully CloseableGold Plated 510 ContactSquonk-Ready 510 Pin304 Stainless Steel810 Drip Tip11mm Bore Delrin Drip Tip(Black Finish Only)11mm Bore ULTEM Drip Tip12mm Wide Bore Proprietary Delrin Drip Cap(Black Finish Only)12mm Wide Bore Proprietary ULTEM Drip Cap510 Drip Tip Adapter IncludedPackage ContentsOne Vandy Vape Phobia BF RDAOne 810 ULTEM Drip CapOne 810 ULTEM Drip TipOne Philips Screw DriverOne 510 Drip Tip AdapterOne Bottom Feed 510 PinSpare Part PackUser Manual

Vandy Vape Phobia BF-RDA

C$39.99

2 Reviews

Manufactured in Greece by Atmomixani

- Constructed from Solid Stainless Steel
- Rebuildable Dripping Atomizer
- Integrated E-liquid Reservoir with a Maximum Capacity of 2mL
- Innovative Tank Design (feeds e-liquid to the wick with a press of the top cap)
- Three Posts for use with Single or Dual-Coil Setups
- Adjustable Airflow Ring (align 1 hole for single coil or 2 holes for dual-coil)
- Silver-Plated Brass Contact
- Hybrid Connector for the Nemesis by Atmomixani
- Laser Engraved (Atmomixani logo, 3D logo, and unique serial number)

Diameter: 22mm

Available Finish Options: Matte, Shined

Atmomixani 3D Atomizer for Nemesis

C$99.99

1 Review

-Adjustable Airflow
-Removable Top Cap
-Gold Post
-Peek Insulator (able to withstand twice the temperature)
-Customizable AFC Beauty Ring
-Insulated Drip Tip Slot

READY TO SHIP ON TUESDAY, SEPTEMBER, 9TH.

Innovape

Patriot V2 RDA by Innovape

C$20.00

1 Review

The Wotofo Nudge RDA is a 24mm triple post, four terminal, staggered Z post designed rebuildable dripping atomizer with bottom feeding capabilities. The Nudge RDA has a Z style staggered post design with the center pin floating for larger juice capacity. The Nudge RDA has a 6mm deep juice well for your favorite e-juice. The top cap features dual side airflow and can utilize both 810 and 510 drip tips. The Nudge RDA features a condensed chamber and domed top cap for enhanced flavor delivery, making this RDA a perfect fit for either regular use or squonk setups.Product Features24mm DiameterStaggered Z Post Three Post Four TerminalOuter Post Single TerminalCenter Post Double TerminalFloating Center Post for Larger Juice Capacity3mm by 2 Each Terminal OpeningTop Mounted Philips Screws6mm Deep Juice WellPEEK InsulatorDouble O-Ring SecuredSide Airflow SystemDual 7mm by 3mm Airslots11mm Wide Bore Drip Tip810 ULTEM Drip Tip510 Drip Tip AdapterStainless Steel Construction24K Gold Plated 510 ConnectionPackage ContentsOne Wotofo Nudge BF RDAOne ToolOne Bag Comp Wire CoilsOne Bag Japanese CottonOne Squonk PinSpare Parts PackOne User Manual

Wotofo

Wotofo Nudge 24mm RDA

C$39.99

1 Review

SMOK introduces their newest TFV series sub-ohm tank, the TFV8 X-Baby Sub-Ohm Tank with top airflow. The TFV8 X-Baby Sub-Ohm Tank retains the same functionality as the world famous baby beast tank, such as a hinge and lock top fill system, but is capable of holding up to 4ml of E-Liquid. Included with the TFV8 X-Baby Sub-Ohm Tank are two X-Baby Coil Family Coil Heads: an X-Baby M2 Coil Head and an X-Baby Q2 Coil Head with wattage ranges of 30 to 50W and 40 to 80W respectively. Airflow enters the TFV8 X-Baby Tank via dual adjustable top airflow, with each airslot measuring at 16mm by 2mm and the 8.5mm delrin drip tip allows for ample vapor intake. The X-Baby TFV8 Sub-Ohm Tank, also known as the Baby Beast Brother, is SMOK's first top airflow tank and is a top contender on the market, alongside the rest of the TFV series.Product Features24.5mm DiameterHinge and Lock Top Fill SystemSwivels Open and ShutFill Port4ml Max CapacitySMOK X-Baby Coil FamilyX-Baby M2 Coil Head0.25 ohm30 to 50WX-Baby Q2 Coil Head0.4 ohm40 to 80W55 to 65W Recommended RangeDual Adjustable Top Airflow16mm by 2mm Each Airslot8.5mm Delrin Drip TipStainless Steel and Glass ConstructionPackage ContentsOne SMOK TFV8 X-Baby Sub-Ohm TankOne X-Baby M2 Coil HeadOne X-Baby Q2 Coil HeadOne Replacement Glass Tank SectionSpare Parts PackUser Manual

Smok

TFV8 X-Baby Sub Ohm Tank

C$34.99

7 Reviews

Sporting the same Velocity style build deck as many other rebuildable devices out on the market, the Gemini RTA adds new features that others lack. Improved airflow coming from a total of four cyclops holes as well as a top airflow system adds more air for more vapor. A convenient top fill method allows for easy and painless tank filling when on the go. For added convenience and flexibility, the Gemini also features a fully adjustable juice control system to manage the amount of eliquid being wicked into the atomizer which also helps to regulate flooding whether your juice is thin or thick.

Spectfications:

22mm Diameter
Large Build Deck (Velocity Style)
2mm Post Holes
Top Fill Method
Delrin Wide Bore Drip Tip
Glass Tank
Stainless Steel Construction
Four Cyclops Adjustable Airflow Holes
Adjustable Top Airflow
Bottom Airflow Below Coils
Juice Control

Package Contents:

1 x Gemini RTA
1 x Gemini Replacement Glass Tube
1 x 510 Drip Tip
1 x 510 Drip Tip Adapter
1 x Allen Key
2 x Prebuilt Clapton Coils
4 x Spare Allen Screws
4 x Spare O-Rings
1 x User Manual

Vaporesso

Gemini RTA

C$34.99

3 Reviews

The Smok TFV4 Mini Sub-Ohm TC Tank is the evolution of the smash hit Smok TFV4, bringing all of the main characteristics of the original while integrating an improved double-layered drip tip for auxiliary heat proofing and additional air flow control in a much smaller form factor. It can be used with a multitude of interchangeable coil heads, giving it the range and flexibility to be customized directly to each individual preference. Featuring eight brand new cores to utilize with today's highly advanced box mods: TF-CLP2, TF-S6, TF-RCA, TF-Ti, TF-N2, TF-N2 Air Core, Tf-T2, and TF-T2 Air Core, it is set to quickly assert itself as a supreme versatile tank, providing maximal vapor production and robust flavors of your favorite juice. The upgraded drip tip is designed with a double layered barrel structure, a stainless steel outer tube and glass inner tube to create a heat shield between the spacing to avoid scalding. In addition, it is designed with dual quad airslots, located at the drip tip and superior base for added safety features and enormous cloud production. A cleaverly designed top-fill method is an added ergonomic factor, to significantly solve leaking problems. If you are looking for a high performance fully-loaded tank with top-of-the-class distinction, check out the Smok TFV4 Mini!

Smok TFV4 Mini Sub-Ohm Tank Features:

22mm Diameter
3.5mL Juice Capacity
Stainless Steel Construction
High Grade Glass Reinforcement
Top-Fill Design with Hinge Lock
Interchangeable Coil Heads
Quad Adjustable Airflow Control at Base and Drip Tip
Double-Layered Drip Tip
510 Thread Connection

Includes:

1 TFV4 Mini Tank
1 TF-S6 Core 0.4ohm
1 TF-CLP2 Core 0.35ohm
1 TF-RCA
1 Replacement Glass Tube
Spare Parts

Coils Option and Wattage/TC Compatibility:

TF-Q4 (Quadruple Sub-Ohm Coil): 0.15ohm
TF-T3 (Triple Sub-Ohm Coil): 0.20ohm
TF-R1 (Single RBA Coil): 0.85ohm
TF-R2 (Dual RBA Coil): 0.25ohm
TF-CLP2 (Clapton Dual Coil Head): 0.35ohm, 30~90W
TF-S6 (Sextuple Coil Head): 0.4ohm, 30~100W
TF-RCA (Rebuildable Clapton Coil Head)
TF-Ti (Titanium Dual Coil Head): 0.33ohm, 450-600F
TF-N2 (Ni200 Dual Coil Head): 0.12ohm, 420-600F
TF-N2 Air (with Two More Air Holes): 0.12ohm, 420-600F
TF-T2 (Higher Resistance Dual Coil Head): 1.5ohm, 20~45W
TF-T2 Air (with Two More Air Holes): 1.5ohm, 20~45W
TF-STC2 (Stainless Steel with Clapton Coil Prebuilt): 0.25ohm, 350-550F, 40~70W

Do not use Ni200 and Ti coils with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Smok TFV4 Mini Replacement Coils:
TF-Q4
TF-T3

Smok

Smok TFV4 Mini Sub Ohm Full Kit

C$34.99

2 Reviews

The Coil Art Azeroth Two Post RDTA is one of the first clamp style RDTA's available on the market and is purpose built for performance featuring triple slotted direct to coil airflow, a 4ml tank capacity, and huge amounts of overall airflow. The Azeroth measures 24mm in diameter with 18mm of usable build space. One of the first to deploy a two post clamp style build design, each post features 3mm by 2mm of terminal space and is secured via two Phillips screws per post. Wicking the Azeroth is done via four sidewall ports and can be precisely wicked by unthreading the mid section to freely access the tank reservoir and wicking systems. Filling the Azeroth is quick and easy with a side fill port measuring 10mm by 3.5mm, allowing users to maximize the tank capacity up to it's limit of 4 milliliters. Airflow enters the build deck directly through dual triple slotted diagonally positioned airslots, with each airslot measuring 6mm by 1mm. The airflow system is throttled via cutouts milled in the drip cap. The construction of the Azeroth utilizes high quality 304 stainless steel and glass, with 24K Gold Plating on the deck, posts, and 510 connection to provide superior conductivity and durability. Establishing itself as one of the most feature rich RDTA platforms with the integration of clamp style posts, Coil Art's Azeroth RDTA is a true flagship system.Product Features24mm DiameterTwo Post Clamp StyleDual Coil Compatible3mm by 2mm Effective Coil Mounting AreaPhillips ScrewsPEEK InsulationQuad Wicking PortsSidewall CutoutsGold Plated Build Deck and Posts18mm Internal DiameterThreaded Mid SectionAccess Into TankEasily Wicked SystemThreaded Onto Build DeckInnovative Side FillFill Port Positioned Centrally Between Top Cap O-RingsSealed When Assembled10mm by 3.5mm4.0ml Tank CapacityDual Triple Slotted Direct to Coil AirflowDiagonal Positioning6mm by 1mm Each AirslotAdjustable via Drip CapDelrin Competition Bore Cap12mm BoreTapered Delrin Wide Bore Drip Tip11mm to 8mm BoreGold Plated 510 Connection304 Stainless Steel and Glass ConstructionPackage Contents1x Coil Art Azeroth RDTA1x Tapered Wide Bore Drip Tip1x 510 Delrin Adapter1x Spare Glass Tank Section1x Tank BandSpare Tank Seal PackPhillips Screwdriver and Spare Screws

CoilART

CoilART Azeroth RDTA

C$44.99

2 Reviews

The Cartel Mods Stillare Mark IV is the newest version of the vaunted Stillare RDA series, elevating the series into new territory by combining the extremely popular two post build deck concept with the machining and craftsmanship that Cartel Mods is renowned for alongside an extremely competitive price point. The Stillare Mark IV features a two post build deck, one of the most highly regarded and universally acclaimed build deck designs today, with dual 2mm diameter terminals per post that allow for nearly unmatched ease and compatibility with build configurations. Each terminal is secured by a side mounted flathead screw, allowing for easier maintenance as compared to Allen keyed heads. The build deck features channeled wicking ends alongside a 5mm deep juice well that allows for tremendous juice capacity, reducing frequency of redripping for the user. Airflow for the Mark IV now features two distinct areas of entry, with dual 7mm by 2mm bottom airslots feeding directly up into the chamber as well as tension secured 7mm by 2mm dual top airslots that can be adjusted independently from the bottom airflow. A 12mm Competition Bore Threaded Stainless Steel Drip Top pairs perfectly for high heat and power configurations, while an included 510 Threaded Adapter allows use with standard drip tips. Manufactured out of 304 Stainless Steel, the Mark IV follows in line with Cartel Mods renowned manufacturing quality, featuring clean, precision manufacturing matched with simple and elegant design aesthetics. Offering a dynamic build deck, sophisticated airflow, precision manufactured and an unbelievable price point for American Made manufacturing.

Product Features:
- 22mm Diameter
- Two Post Build Deck
Two 2mm Diameter Terminals Per Post
Side Tension Applied
Channeled Juice and Wick Well
5mm Deep Juice Well
Flathead Screws
PEEK Insulator
Dual O-Ring Seal
- Dual Adjustable Bottom Airflow
7mm by 2mm Each Airslot
Elliptical Shape
- Dual Adjustable Top Airflow
7mm by 2mm Each Airslot
Tension Secured
Can Be Throttled Completely Closed
- Reduced Chamber
Superior Rate of Airflow Delivery
Superior Flavor
- 12mm Competition Bore 304 Stainless Steel Drip Top
- 510 Threaded 304 Stainless Steel Adapter
- Silver Plated Copper 510 Contact
- 304 Stainless Steel

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling.

Cartel Mods

Cartel Mods Stillare V4 2-Post RDA

C$25.00

1 Review

Product Features23mm Diameter Deck / 20mm Height (Without Driptip)24mm Diameter w/ Beauty RingChamfered Edge Cap Which Protects Excessive Wear on the O-RingsTwo-Post Downward Angled Indirect Airflow DesignAirflow Collides under the coil to allow more air on the surface of the wire & provides a smooth, quiet & extremely flavorful vape experienceCapsDelrin WhiteAnodized Black AluminumStainless Steel SandblastedUltem510 & 810 Compatible Drip TipsRemovable Heat FinsInner Concaved Caps for Maximum Flavour Production & Smooth Airflow CirculationIntegrated Anti-Spin Stop Tab Design for Easy RDA RemovalWide Bore 810 Tip w/ Threading To Use With Optional Removeable Stainless Steel "Splash Guard" Disk510 Drip Tips w/ 6mm Bore Hole For Easy Dripping When In Non-squonk ModeVase Inspired 810/510 Drip Tip Adapter Which doubles as a DriptipLaser Etch DesignPositive Peek InsulatorBase Of Deck w/ Integrated O-ring To Protect Mod From Scratches & Prevents Liquid From Leaking In/out Of 510 ConnectorMilled Juice Reservoir To Allow More Juice To Absorb Into Wick When Squonking Or DrippingDual Downward Angled 2mm X 6mm Adjustable AirflowNon Reduced Gold Plated Brass Single Postless Build Deck To Maximize Real Estate1mm Vertical Airflow Ring Reducer (cut Airflow In half Vertically By Installing Ring On Deck, Before Cap)Gold Plated Brass 510 Bottom Feeder Pin w/ Bottom Feeder Plug (Flathead Screw)Hex Grub ScrewsIntegrated Pockets To Store Bottom Feeder Pin Plug & Replacement Hex ScrewProtruding Positive 510 Pin (Compatible w/ Hybrid Mechanical Mods)510 ConnectionAlignment Grooves For Perfect & Easy Coil MountingUltem Chamber Reducer (1mm x 5mm airflow)All Parts Interchangeable With Entire B2K seriesPackage ContentsOne B2K RSA TRVPMATIK SetSpare O-ringsHex Allen wrenchChamber Reducer Adapter510 Bottom Feeder Pin 510 Bottom Feeder Pin PlugCapsBlack Aluminum Anodized Stainless Steel SandblastedWhite DelrinSandblasted UltemStainless Steel 810 Splash Guard Disc x8 Decorative heat finsx4 510 Tips x4 810 Tipsx4 Beauty RingsUltemClear PolycarbonateWhite DerinBlack DelrinAdditional features compared to B2K RSA #187 Rendition (V4)SS media blasted deck vs gold Removable heatfin on the capSandblasted Ultem cap vs semi-polishedUltem chamber reducer for "restrictive lung" vaping (1mm x 5mm airflow)Low profile beauty ringsDesigned In Canada, Manufactured In Asia.

BB Vapes

B2K RSA TRVPMATIK V5 RDA

C$99.99

1 Review

Aspire's Athos Sub-Ohm Tank is a 25mm, threaded top fill system with a stainless steel protective glass sleeve. A single fill port is used to fill the tank, which is capable of holding up to 4ml of E-Liquid. The Athos Sub-Ohm Tank utilizes the Athos Coil Family and includes an A3 Tri-Coil Head and an A5 Penta-Coil Head, capable of running 60 to 75W and 100 to 120W respectively. Airflow enters the Athos Sub-Ohm Tank via triple bottom adjustable airflow, measuring at 11mm by 2.5mm each air slot and can be fully closed. A 12mm bore proprietary drip tip or 14mm wide bore proprietary delrin drip tip, both of which are included with the tank, can be used as the user prefers. Aspire's Athos Sub-Ohm Tank is the latest model from Aspire and is has high wattage capability.This tank is included in the Aspire Aspire Speeder 200W Starter Kit⁠Product Features25mm DiameterStainless Steel Protective Glass SleeveThreaded Top FillSingle Fill Port4ml Tank CapacityPour To FillTriple Bottom Adjustable Airflow11mm by 2.5mm Each AirslotFully CloseableAthos Coil FamilyA3 Coil0.3 ohm60 to 75WA5 Coil0.16 ohm100 to 120WOrganic Cotton12mm Bore Proprietary Drip Tip14mm Wide Bore Proprietary Delrin Drip TipStainless Steel and Glass ConstructionPackage ContentsOne Aspire Athos Sub-Ohm TankOne A3 0.3 ohm CoilOne A5 0.16 ohm Coil12mm Bore Proprietary Drip Tip14mm Wide Bore Proprietary Drip TipSpare PartsUser ManualWarning Card

Aspire Athos Sub-ohm Tank

C$39.99

4 Reviews

SMOK has crafted yet another powerful sub-ohm tank--the Resa Prince! The SMOK Resa Prince Sub-Ohm tank features a 26mm diameter base, 30mm diameter with the bubble glass tank section, threaded top fill system, and new 7.5ml E-Juice capacity with the bulb glass tank section (pre-installed). The Resa Prince also includes a standard glass tank section for users that do not wish to use the bulb glass tank section. The SMOK Resa Prince Sub-Ohm Tank utilizes the SMOK TFV12 Prince Replacement Coil Family and includes a 0.4 ohm V12 Prince-Q4 Quadruple coil head, a 0.15 ohm V12 Prince-X6 Sextuple coil head, and an all-new 0.12 ohm V12 Prince-T10 Red Light coil head that emits a red glow around the coil while vaping! SMOK's Resa Prince Sub-Ohm Tank, with its elaborate cobra resin design with concave texture, new light emitting coil, and high-capacity convex bulb glass tube, makes this sub-ohm tank a top contender alongside many other SMOK products!Product FeaturesDimensions30mm x 58mm26mm Diameter Base30mm Diameter with Bubble Glass Tank SectionThreaded Top Fill SystemTwo Large Fill Ports7.5ml Max Standard CapacityWith Bulb Glass Tank Section2ml Capacity with Standard Glass Tank SectionSMOK V12 Prince Coil FamilyV12 Prince-T10 Red Light0.12 ohmPatented Decuple Coil60 to 120W Range80 to 110W Recommended RangeV12 Prince-X6 Sextuple Coil Head0.15 ohmPatented Sextuple Coil50 to 120W80 to 100W Recommended RangeV12 Prince-Q4 Quadruple Coil Head0.4 ohmPatented Quadruple Coil40 to 100W60 to 80W Recommended RangeCompatible with Additional V12 Prince CoilsDual Adjustable Airslots11mm by 3mm Each Airslot7mm Bore 810 Resin Drip TipResin, Stainless Steel and Glass ConstructionPackage ContentsOne SMOK Resa Prince Sub-Ohm TankOne V12 Prince-T10 Red Light Coil HeadOne V12 Prince-X6 Sextuple Coil HeadOne V12 Prince-Q4 Quadruple Coil Head (Pre-Installed)One Replacement Glass Tank Section2mlOne Bulb Glass Tube (Pre-Installed)7.5mlSpare Parts PackUser Manual

Smok

Smok Resa Prince Sub-ohm Tank

C$42.99

Due to the nature of manufacturing and design, each Hellvape x AmbitionZ VapeR Aequitas 24mm RDA drip tip colours come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random. Hellvape introduces the Aequitas 24mm RDA, designed by AmbitionZ VapeR; a 24mm, top terminal, gold plated postless raised build deck and a 3mm deep juice well. The Aequitas RDA is capable of running both single and dual coil options and each terminal has side mounted hex flathead screws, which are both included. Airflow enters the Aequitas RDA via flippable barrel for either a top side diagonal airflow or a bottom side diagonal airflow. Included with the RDA are a 10mm wide bore 810 Delrin drip tip and a 510 drip tip adapter for various drip tip styles and use. The Aequitas RDA also includes a gold plated bottom feed pin to convert your RDA into a bottom-feeding rebuildable atomizer. With its unique flippable barrel for airflow preference and convenient to build on build deck, the Hellvape Aequitas 24mm RDA is a stylish, high-functioning rebuildable atomizer at an affordable price!Product Features24mm DiameterGold Plated Postless Raised Build DeckSingle Terminal Per PostSingle or Dual Coil Options2.5mm Terminals Per PostSide Mounted Hex Screws or Side Mounted Flathead ScrewsGold Plated Positive Posts3mm Deep Juice WellDouble O-Ring SecuredPEEK InsulatorFlip Barrel Non-Adjustable Airflow9mm by 2.5mm Each AirslotSingle or Dual Coil OptionsFocus on FlavorMinimizes LeakingFlippable Barrel for Top or Bottom Airflow10mm Wide Bore 810 Resin Drip Tip10mm Wide Bore 810 Delrin Drip Tip Included510 Drip Tip Adapter IncludedGold Plated 510 ConnectionGold Plated Bottom Feed Pin304 Stainless Steel ConstructionPackage ContentsHellvape Aequitas 24mm RDAOne 10mm Wide Bore 810 Delrin Drip Tip510 Drip Tip AdapterSpare Parts PackGold Plated Bottom Feed PinTwo Allen KeyOne Slotted Screwdriver

Hellvape Aequitas 24mm BF RDA

C$39.99

The Tanko is a 24mm RTA with amazing vaper and flavour production while offering an abundance of accessories. The base features a large slotted single airflow configuration which can be adjusted to your preference. The build deck provides a very straightforward layout, yet allows the accommodation of large single coil builds. The posts are slotted, but with one side being open, coil leads are a breeze to catch and install. For efficient performance, a generous area for cotton was left on either side of the deck in order to stay saturated during heavy use. To combat the amount of heat that would be generated from low resistance builds, the Tanko is capable of allowing more than enough airflow through its build chamber. When purchasing a Tanko RTA, the included accessories are: Ultem and frosted clear tank sections, as well as drip tip integrated caps to match both materials, and a 510 adapter cap to use your own drip tip. These accessories are all included in both colour options, stainless steel and black.Product Features24mm diameter45mm tall with integrated chuff cap43mm with 510 adapter but no drip tip.

Odis Collection

Odis Tanko 24mm RTA

C$109.99

Featuring a detachable structure and optional atomizer tube, the INDE DUO comes from the creative mind of JayBo. The conical top cap features a vortex flow design for a smoother pull and efficient vapor and flavor production. Airflow is controlled via the rotating ring located at the top of the RDA and can conveniently be accessed. In addition to the transparent 30mm atomizer tube, the atomizer base can also match the 22mm atomizer tube for even greater versatility. Along with an innovative build deck, Jaybo's designs and Wismec's top notch quality, this dynamic duo never ceases to impress.

Specifications:

Detachable Structure
Optional Atomizer Tube
Unique Vortex Flow Design
Convenient Airflow Control
Two Choices Of Atomizer Tube
Unique Build Deck

Package Contents:

1 x INDE DUO RDA
2 x Atomizer Tube (30mm & 22mm)
4 x Spare O-Rings
3 x Spare Allen Screws
1 x Warranty Card

Wismec

INDE DUO RDA Atomizer

C$39.99

This beautifully machined atomizer from Atmomixani is only 17mm in diameter, meaning it fits flush with Atmomixani Nemi (mini nemesis). It is an absolute delight to build on. It comes with an included 510 adapter so you can use on any device (so you aren't limited to 14xxx batteries on the Nemi), and has Nemi threads for hybrid mode.

- 17 mm diameter
- 22mm height in hybrid mode

Air holes: 1,2-1,5-2mm and 2 x 1,5mm for dual coil

Atmomixani Anima Atomizer

C$119.99

The Scuba tank can accommodate any “diver” you may want to use. Its end caps are made of AISI 304L stainless steel, while the body is made of acrylic, food-grade, plastic. It has a height of 36mm, a maximum width of 22mm, and has a net volume of 2.8ml for 35mm and 4.3ml for 45mm version.

Refilling is easy by removing the cap on one of its end cap; the cap is of sufficient diameter to allow the use of containers with different nozzles whether narrow ones such as needle or wider volumetric containers such as HALO for example.

In the middle of the main body there is a decorative and protective ring which in Scuba’s basic version is made of stainless steel. This ring can be replaced by other rings types of different material, design and color, allowing you to adjust Scuba to your own aesthetic preferences.

The kit comprises the Scuba with a stainless steel ring, spare tube and a set of o-rings.

The gold Scuba tank is plated with 24K Gold.

Atmistique Scuba Diver Tank

C$74.99

A new way to drip 306 atomizers.

Made from stainless steel 304L, with autonomous shielded center pole.It can hold 3-4 times more drops of e-liquid than any current system without any leakage. We optimized the air circulation system for a smoother draw

It's diameter does not exceed 14mm and it's body length (without measuring 510 connector and drip tip) is 32.85mm.

Atmistique Grail 306

C$59.99

The Diver V2 is a rebuildable atomizer and is identical in size to a type 510 cartomizer making it ideal for use in cartomizer type tanks such as the Scuba, Minion, or Loki.

Available tubes are:

Enzelis, 35mm, and 45mm.

If you'd like to build a Diver V2, you will require a [b]BASE[/b], [b]TUBE[/b] and [b]CENTER PIN[/b]

Diver V2 - Tube

C$14.99

Made in USA

This is the Brass Edition of the Tugboat Atomizer by Flawless.
Product Features:

Naval Brass Edition Tugboat Atomizer by Flawless
Naval Brass With SS Deck and Copper Center Post
Comes with an engraved and serialized drip tip. For brass version, it comes with a shorty styled Drip Tip
Stainless Steel Construction
22mm outer diameter
3 post design
Huge juice well
Flush mounted cap
Huge air hole so most likely no air hole drilling required
Comes with 1 Tugboat Drip Tip ($25 Value)
Heat resistant drip tip with serial and Tugboat engraving
Engraved with Tugboat and American Flag

Tugboat RDA by Flawless - Naval Brass

C$70.00

The Cascata allows your juice to flow directly to the coil resulting in extremely accurate flavor delivery. The design is sleek and compact, sure to look nice on any mod you pair it with.

Features:

- Titled deck for optimal juice flow to the coils
- Ultra reduced chamber for the most accurate flavor delivery
- Juice Well Hood to guide juice to its choke point
- AFC control which is guided by the negatice screws
- Juice Fillport, works with needle bottles and others.
- Petite low profile nature to pair up with any mod you desire
- Hard gold electoplated pins and screws for maximum conductivity and durability
- 304 stainless steel construction
- Includes the Cartel c2 driptip to cover the fillport
- may also be paired up with other driptips which will give you more airflow
- Deep and Precise engravings of the logos

Recommended Builds:

-26 gauge 5/6 wrap Dual Coil
- 24 gauge 5 wrap Single Coil

Wrap your negative post all through around the screw to ensure the locked position

Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.

Cartel Mods

Cascata RDA

C$60.00

Vandy Vape's features the Kensei 24 RTA, featuring a Staggered height build deck, an expandable tank capacity for all day range, and all paired with a dynamic bottom honeycomb airflow system. The Kensei 24 RTA's ability to produce immense flavor and vapor production stems from its core, a gold plated staggered height build deck with a honeycomb air channels and large wicking cutouts. The pair of centralized air channels brings airflow beneath the coils, while the outer channels direct airflow around the side and up towards the domed chimney. The Kensei 24 comes as a 2ml compact tank system which is expandable to 4ml bubble glass section by easily replacing the pyrex glass section. Vandy Vapes keeps the user in mind by integrating knurling on the adjustable airflow control ring, adjustable juice flow control ring, and on the removable top cap for filling for ease of use. The Kensei 24 utilizes a 810 drip tip platform and includes two 810 drip tips, acrylic and
delrin, as well as a 510 drip tip adapter. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomizer today, Vandy Vape's Kensei 24 RTA enters the market as a strong RTA that boasts great flavor and clouds.The Zeus RTA by Geek Vape features a thoroughly tested adjustable top airflow design which eliminates leaking while providing a satisfyingly smooth draw. The Zeus RTA has a 4ml tank capacity and can quickly be refilled through its quarter turn threadless top fill design. Featuring a postless build deck designed for single coil configurations, the Zeus RTA utilizes a unique 3D airflow design which directs airflow to all sides of the coil for optimal flavour.Product Features24mm Diameter Base26mm at Widest PointThreaded Top Fill Design2ml Standard Capacity4ml Maximum CapacityBubble Glass TubeStaggered Height PostsTop Mounted Flathead ScrewsHoneycomb Airflow SystemTwo Unified Wicking Port CutoutsAdjustable Juice Flow ControlExtended PEEK InsulatorGold Plated Build DeckDual Adjustable AirflowThree Positive Locking PositionsGold Plated 510 ContactAdjustable 510 Pin304 Stainless Steel and Glass Construction810 Acrylic Drip Tip510 Drip Tip Adaptor510 Delrin Drip TipPackage ContentsOne Vandy Vape Kensei 24 RTAOne 4ml Glass SectionDrip Tip SetOne Hex KeyOne Accessory BagSpare Part PackUser Manual

Kensei 24 RTA

C$44.99

AUTHENTIC Philippine made Nimbus rebuidable dripping atomizer from Jeyps & Saint Quii/JPGE.

The Nimbus is approximately 20mm wide and is 510 threaded for maximum compatibility with most any device.

Features:

- Cap is pre-drilled with dual air holes and can be enlarged by using a drill (please be careful).
- Triple posts with through hole design ensures your coil terminals make good contact and don't move.
- Top cap has a unique "spit-guard" feature which helps prevent liquid getting into your mouth due to over dripping. Ironically it also can enhance the flavor of your e-Liquids when -not- overfilled.

Precision machined out of food grade 304 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

JPGE

JPGE Nimbus

C$20.00

The new Faucon RDTA by YiHi is made from high grade SS316 with 24k gold plated connection points and features a 2ml capacity Pyrex glass tank. The Faucon is supplied with Black Delrin and Ultem drip tipProduct Features316 Stainless Steel24mm Diameter24K Gold Plated Build Deck810 Drip Tip1x Pyrex Glass X 1 Frosted Tank Section included.

Yihi

YiHi SXmini Faucon RDTA

C$49.99

The Helix RDA Atty is one beautiful atomizer, packed with features that take your vaping to the most intuitive level reached. Utilizing 3 Air-flow adjustment rings you can dial in your exact draw desired as well as create a nice smooth vortex inside, making your build as smooth as it is powerful. Looking for a more concentrated vape? Perhaps a lighter, airy vape? The chamber size of the Helix atty is completely adjustable, simply twist the top cap up or down to dramatically change your atomizer to your liking. Reduce that chamber! Expand it! It is up to you.

– 304 Stainless Steel with 1 Brass Ring
– 22mm diameter
– 2mm wide posts
– Direct to coil air-hole for maximized flavor and vapor
– External airflow selection. Triple adjustable airflow allowing for full customization
– Adjustable Chamber size, create a pressurized system for more dense and flavorful vape or lighter and airy
– Dual airflow on the top cap to allow air in from the top for better swirling and draw
– Deep well
– PEEK Insulators
– Serialized
– Most anticipated RDA from Philippines

Olympian Mods

Helix RDA

C$119.99

A brand new V2 Tank by Atmomixani with the unique name Loki Tank. It is a quarz glass tube with a very easy refill system.

It fits all types of cartomizers and many types of tank atomizers.

It is 22mm in diameter and fits perfectly on Nemesis or 69 Mod.

Version 2 features a single outside hole (to fill) and 2 inside holes (one to inject eliquid and a second to push out air) and a firm locking bottom outside ring.

It also comes with 2 quartz glasses (1 to make it 35mm and one to make it 45mm).

This tank accepts both Flanged and flangeless cartomizers

Atmomixani Loki Tank V2

C$74.99

A flavor taster and cloud chaser- the best of both worlds, right at your fingertips and it's taking the world by storm. The Typhoon is a tank atomizer with ceramic fibers to prevent flooding and burning, along with a metal mesh cover for liquid filtering. It features a full glass drip tip and is encased with a full glass reservoir to produce the best flavors. With dual tight enlarged airflow, it satisfies the cloud chaser without compromising taste.

The Typhoon is available with affordable 0.5 replacement coils that last longer than the competition. This beautiful stainless steel atomizer provides the most enjoyable vaping experience from a pro-tank system.

Features:

510 Thread Compatible
Replaceable Coil Head: 0.5 ohms
Large Adjustable Airflow Control
2.5mL Capacity
22mm Diameter
Full Glass Drip Tip & Reservoir
4 Digit Serial Authentication

Dimensions: 2"L x 7/8"D (without drip tip)

Council of Vapor

Typhoon Tank

C$44.99

The Trinity Delrin by Aria Built
The Trinity Delrin is our new, interchangeable wide bore drip tip system specially designed for Aria Built by Trinity Glass right here in Southern California. The first interchangeable wide bore drip tip in the industry, the Trinity allows you to easily swap out the Pyrex tip for a heat dissipating, black delrin tip to keep your clouds nice and cool.

Included:
-Black delrin drip top with dual inner and outer O-rings
-Black delrin, true wide bore drip tip
-Polished Pyrex, true wide bore drip tip
-Compatible with the Aria Orion, Beyond Vape Mako, PlumeVeil, Tobh, Patriot V2, Vulcan, and authentic Doge RDAs
-Made in the USA

Aria

Aria Trinity Top Cap

C$24.99

The GeekVape Illusion Sub-Ohm Tank is the first true pure Sub-Ohm Tank platform from one of the most well respected design teams in the RTA market segment, utilizing the new i4 and i1 large form factor high performance coil systems that reach up to a maximum of 260W. Designed to compete with the most powerful Sub-Ohm Tank systems on the market, the Illusion measures 25mm in diameter and holds a maximum capacity of 4.5ml, filled via the threaded top fill system. The Illusion is the first GeekVape platform to integrate the new high performance
i series coils and includes the i4 and the i1 coil systems. The 0.15 ohm i4 coil features a quad vertical coil design with dedicated wicking slots for each coil, and is rated between 50 to 260W. The 0.15 ohm i1 coil, intended for a more flavor rich experience, features a single parallel vertical coil with an oversized internal bore and eight diagonal wicking slots, and is rated between 50 to 180W. The Illusions airflow is one of the largest in this size range, with dual airslots measuring 15mm by 3mm each, allowing for tremendous maximum airflow and is supplemented with a straight 10mm bore one piece top cap. Included with each kit is an additional top cap that is compatible with standard 510 drip tips. Designed by a team with one of the most respected portfolios of rebuildable tank atomizers in our industrys history, GeekVapes Illusion 260W Sub-Ohm Tank enters the most competitive market segment this year as one of the best systems available.Product Features25mm Diameter4.5ml Tank CapacityThreaded Top Fill SystemDual Filling SlotsIllusion i Series Coil Familyi4 Coil0.15 ohmQuad Vertical Coil DesignDedicated Vertical Wicking Slots per CoilOrganic Cotton50 to 260W Rangei1 Coil0.15 ohmSingle Parallel Vertical Coil DesignEight Diagonal Wicking SlotsOrganic Cotton50 to 180WDual Airflow Slots15mm by 3mm EachTwo Top Caps Included10mm Straight Bore One Piece CapPreinstalled510 Compatible CapStainless Steel and Glass Construction24K Gold Plated 510 ConnectionFull Gold Plated HousingPackage ContentsOne GeekVape Illusion Sub-Ohm TankOne i4 CoilOne i1 CoilTwo Top Caps10mm Straight Bore Top Cap510 Compatible Top CapAdditional Glass Tank Section

Geekvape

Geekvape Illusion 260W Sub-ohm Tank

C$34.99

C$7.99

Smok

The SMOK TFV12 Baby Prince Sub-Ohm Tank enters the market as the most capable Sub-Ohm Tank ever released, asserting itself as the upgrading version of the TFV8 Baby Beast, presenting unprecedented vapour and flavour possibilities. Following up on the world's most popular Sub-Ohm Tank of 2016 with the TFV8 platform and its smaller editions, the TFV12 Baby Prince elevates the vape tank segment even greater, capable of utilizing the V8 Baby Coils that we all know and love. The chassis design of the TFV12 Baby Prince features multiple diameters, measuring 22mm at the base and 26mm at the widest point. The new press to open Top Fill System that isn't featured from the previous editions is fully implemented into the TFV12 Baby Prince, with a single fill port and a maximum tank capacity of 4.5 millilitres with the convex glass and 2 millilitres with the standard glass. The Baby Prince comes with three coils, the V8 Baby-Q4 0.4 ohm, rated at 30 to 65W and recommended at 50 to 60W, the new V8 Baby T12 Red Light Duodecuple Coil Head 0.15 ohm, rated at 50 to 80W and recommended at 60 to 80W, the V8 Baby Mesh Coil Head 0.15ohm, rated at 40 to 80W and recommended at 60 to 70W. The V8 Baby T12 Red Light Duodecuple Coil head lights up red when firing the device. Airflow for the TFV12 Baby Prince is configured around the base of the chassis, providing ample airflow even for the maximal range of the atomizer. Heralding in the newest generation of SMOK atomizers, the TFV12 Baby Prince Sub-Ohm Tank makes a bold but accurate assertion as the premiere cloud chasing tank on the market.Product Features22mm Diameter Base26mm at Widest PointHinge and Lock Top Fill SystemSwivels Open and ShutFill Port2ml Max Standard Capacity4.5ml Max Convex Glass Extension CapacitySMOK V8 Baby Coil FamilyV8 Baby Q4 Coil Head0.4 ohmQuadruple Coils30 to 65W Range50 to 60W Recommended RangeV8 Baby T12 Red Light Duodecuple Coil Head0.15 ohmPatented Octuple Coil50 to 90W60 to 80W Recommended RangeEmits Red LightV8 Baby Mesh Coil Head0.15 ohmMesh Coil40 to 80W60 to 70W Recommended RangeCompatible with Additional V8 Baby CoilsDual Adjustable AirslotsStainless Steel and Glass ConstructionPackage ContentsOne SMOK TFV12 Baby Prince Sub-Ohm TankOne V8 Baby-Q4 0.4 ohm Coil HeadOne V8 Baby-T12 Red Light 0.15 ohm Coil HeadOne V8 Baby Mesh Coil 0.15 ohm Coil HeadOne Replacement Glass Tank Section2mlOne Convex Bubble Tank Glass Tube4.5mlSpare Parts PackUser Manual

Smok TFV12 Baby Prince Sub-ohm Tank

C$37.99

Atmistique’s new creation Minion, is a tank that stands out for the simplicity of its lines and is characterized by its elegance. The simple design includes only what is necessary for maximum performance, excluding unnecessary pieces which would reduce its autonomy.

It consists of caps made of stainless steel AISI 304L, and fused quartz glass body with flame polished finish to avoid sharp edges. The particularity lies in the special outer UV coating which protects your favorite liquid from ultraviolet radiation. Finally, the construction materials in combination with the thickness of 2mm, makes Minion more durable to… accidents.

The «external» thickness of 1.5 mm at the lower cup «binds» the Minion with every mod, giving the whole set a «hybrid like» effect. Simultaneously, with the interior thickness at 3.7mm, maximizes the quantity (including a carto like atomizer) at 4.5ml of e-liquid!

The final result is a minimalist tank which will suit the needs of every user.

Dimensions: Height 35.3mm and diameter 22mm

Because of the manner of construction , tiny bubbles and fine lines and streaks will be considered normal.

Atmistique Minion Diver Tank

C$44.99

Atmistique’s new creation Minion, is a tank that stands out for the simplicity of its lines and is characterized by its elegance. The simple design includes only what is necessary for maximum performance, excluding unnecessary pieces which would reduce its autonomy.

It consists of caps made of stainless steel AISI 304L, and fused quartz glass body with flame polished finish to avoid sharp edges. The particularity lies in the special outer UV coating which protects your favorite liquid from ultraviolet radiation. Finally, the construction materials in combination with the thickness of 2mm, makes Minion more durable to… accidents.

The «external» thickness of 1.5 mm at the lower cup «binds» the Minion with every mod, giving the whole set a «hybrid like» effect. Simultaneously, with the interior thickness at 3.7mm, maximizes the quantity (including a carto like atomizer) at 1.8ml of e-liquid!

The final result is a minimalist tank which will suit the needs of every user.

Dimensions: Height 35.3mm and diameter 17mm

Because of the manner of construction , tiny bubbles and fine lines and streaks will be considered normal.

Atmistique Minion Mini Diver Tank

C$44.99

FreeMax introduces their FireLuke Sub-Ohm Tank, a 25mm diameter, threaded top fill system with a unique bubbled tank section. The tank can hold a maximum of 5ml of E-Liquid but includes a 4ml glass tank section with a thinner bubbled profile. The FireLuke Sub-Ohm Tank comes in a wide array of finishes including stainless steel, black, or coloured resins. The FireLuke utilizes the FireLock coil family and comes with a 0.15-ohm sextuple coil that can be run from 60 to 140W and an RTA section with a stacked two post build deck and two terminals per post. Airflow enters the FireLuke via dually adjustable bottom air slots that can be fully closed. A proprietary 13mm bore drip tip allows the user to intake adequate amounts of vapour with ample flavour. With its unique bubbled tank section and high-performance coils, the FreeMax FireLuke Sub-Ohm Tank offers a stylistic design and colourways.Product Features25mm Diameter BaseThreaded Top Fill SystemTwo Large Fill PortsPour to Fill5ml Max Capacity4ml Capacity Glass Tank SectionThinner ProfileFireLock Coil Family0.15 ohmSextuple Coil60 to 140WOrganic CottonRTA SectionStacked Two Post Build DeckTwo Terminals Per Post2.5mm Each TerminalDual Airflow Channels5mm by 4.5mm Each ChannelCorner Wicking CutoutsDual Adjustable Bottom Airflow Control14mm by 3.5mm Each AirslotFully CloseableProprietary 13mm Bore Drip TipStainless Steel (or Resin) and Glass ConstructionGold Plated 510 ConnectionPackage ContentsOne FireLuke Sub-Ohm TankOne FireLock 0.15-ohm Sextuple Coil HeadOne RTA SectionOne 4ml Glass Tank SectionOne Proprietary 13mm Bore Drip TipOne Pair Prebuilt Clapton CoilsOne Flathead ScrewdriverSpare Parts PackUser Manual

Freemax

Freemax Fireluke Mesh Sub-Ohm Tank

C$39.99