Sorted by Rating


Filter Sub Categories

Sort

Filter Brands

Uwell
Uwell presents the Whirl 22 AIO MTL Starter Kit, a portable device with simple one button interface, built-in 2ml tank, and a built in 1600 mAh battery. The Whirl 22 has a maximum output wattage of 25W and an atomizer resistance range of 0.5 to 0.7 ohm. The built-in tank has a capacity for 2ml of E-Liquid and can be top filled through the threaded top cap. The Whirl 22's built-in sub-ohm tank uses the Whirl Replacement Coils; these coils have a 0.6 ohm resistance and is best used from 18 to 22W. The built-in tank has a fully adjustable 12mm by 2.5mm air slot with 5 sealable airflow holes measuring 2mm, 1.5mm, 1.25mm, 1mm, and 0.75mm. The airflow can be sealed tightly for MTL use, and adjusted with all of the air holes exposed for DL vaping. The Whirl 22 AIO Starter Kit comes with a 510 wide 5mm bore drip tip. The built-in battery has a capacity of 1600mAh and a 1A charge rate. The single button control interface glows when pressed and shows white when above 3.6V, red lights when below 3.6V, and blinks 10 red lights when the battery requires charging. The Whirl 22 is an excellent solution for vapers who want the flexibility of MTL and DL vaping on the go.Product Features22mm Diameter25W Maximum Output Wattage0.5 to 0.7 ohm Resistance RangeBuilt-In 2ml TankUses Whirl Replacement Coils0.6 ohmBest at 18 to 22WFully Adjustable Airflow Ring12mm by 2.5mm Slot5 Sealable Airflow Ports2mm/1.5mm/1.25mm/1mm/0.75mmThreaded Top Fill CapDual Fill Ports510 Wide 5mm Bore Drip TipBuilt-In Battery1600mAh Battery CapacityMicro USB Charger1A ChargingSingle Button Control InterfaceLED IndicatorWhite LED When In Use4.2V to 3.6V Battery CapacityRed LED When In Use3.6V or Less10 Red LED BlinksNo Battery Charge510 Spring Loaded ConnectionOverload Protection/Short-Circuit ProtectionPackage ContentsOne Whirl 22 KitOne Extra Quartz GlassTwo 0.6 ohm CoilsOne Pack of Replacement O-RingsOne Micro USB CableOne User ManualOne Drip Tip CoverWarning Card Uwell Whirl 22 AIO MTL Starter Kit
Choose Options
Uwell
Uwell presents the Whirl 20 AIO MTL Starter Kit, a portable device with simple one button interface, built-in 2ml tank, and a built in 700 mAh battery. The Whirl 20 has a maximum output wattage of 25W and an atomizer resistance range of 0.5 to 0.7 ohm. The built-in tank has a capacity for 2ml of E-Liquid and can be refilled by removing the threaded tank segment. The Whirl 20's built-in sub-ohm tank uses the Whirl Replacement Coils; these coils have a 0.6 ohm resistance and is best used from 18 to 20W. The built-in tank has a fully adjustable 12mm by 2.5mm air slot with 5 sealable airflow holes measuring 2mm, 1.5mm, 1.25mm, 1mm, and 0.75mm. The airflow can be sealed tightly for MTL use, and adjusted with all of the air holes exposed for DL vaping. The Whirl 20 AIO Starter Kit comes with a 510 wide 5mm bore drip tip. The built-in battery has a capacity of 700mAh and a 1A charge rate. The single button control interface glows when pressed and shows white when above 3.6V, red lights when below 3.6V, and blinks 10 red lights when the battery requires charging. The Whirl 20 is an excellent solution for vapers who want the flexibility of MTL and DL vaping on the go.Product Features20mm Diameter25W Maximum Output Wattage0.5 to 0.7 ohm Resistance RangeBuilt-In 2ml TankStainless Steel and Quartz Glass ConstructionThreaded and Removable for RefillingUses Whirl Replacement Coils0.6 ohmBest at 18 to 22WFully Adjustable Airflow Ring12mm by 2.5mm Slot5 Sealable Airflow Ports2mm/1.5mm/1.25mm/1mm/0.75mm510 Wide 5mm Bore Drip TipBuilt-In Battery1600mAh Battery CapacityMicro USB Charger1A ChargingSingle Button Control InterfaceLED IndicatorWhite LED When In Use4.2V to 3.6V Battery CapacityRed LED When In Use3.6V or Less10 Red LED BlinksNo Battery Charge510 Spring Loaded ConnectionOverload Protection/Short-Circuit ProtectionPackage ContentsOne Whirl 20 KitOne Extra Quartz GlassTwo 0.6 ohm CoilsOne Pack of Replacement O-RingsOne Micro USB CableOne User ManualOne Drip Tip CoverWarning Card Uwell Whirl 20 AIO MTL Starter Kit
Choose Options
Vandy Vape
The Vandy Vape Simple EX Squonk Kit follows the tremendous success of the Pulse BF 80W, featuring a compact regulated voltage squonk device and RDA with integrated battery design and user-friendly functionalities for a great entry-level squonk set-up. Featuring one of the smallest squonk BF mod to date, the Simple EX Squonk Kit features a lightweight and compact box mod with a 4mL squeeze bottle cutout and a smart chipset. Powered by the built-in battery, the Simple EX Squonk Box Mod features a OLED screen that clearly displays voltage settings and battery life. Operated by a tactile firing button, the Simple EX Kit implements a variable range of 3.3 to 4.5 Volts, with adjustments made in increments of 0.3V. The included Simple EX RDA measures 19mm in diameter, presenting a top-secured two-post for single coil configuration and a restricted single side airslot design. Perfect for mouth-to-lung vapers or beginners looking into squonk systems, the Vandy Vape Simple EX Squonk Kit is a phenomenal offering.Product FeaturesDimensions - 58.5mm by 41mm by 23.6mmIntegrated 850mAh BatteryBottom-Feeding Squonk Design - 4mL Squeeze BottleVandy Vape's Advanced ChipsetVariable Voltage Range: 3.3-4.5VVoltage Changes in Increments of 0.3VLightweight Nylon & ABS ConstructionIntuitive OLED Screen - Battery & Voltage DisplayLED Battery Light IndicatorTactile Firing ButtonDual Adjustment ButtonsOvertime ProtectionNo Atomizer AlertLow Power ProtectionShort Circuit ProtectionOver Temperature ProtectionSquonk-Ready 510 Connection Available in Pink, Blue, Green, ULTEMVandy Vape Simple EX RDA Features:21mm DiameterClear Acrylic Top Cap ConstructionOptional Delrin Top Cap Two-Post, Single Terminal DesignLarge Terminal Shelf OpeningTop-Secured via Flathead Slotted ScrewsRestricted Airflow DesignAdjustable Single Side Airslot - Multi-Sized Airflow SizeGold-Plated Squonk BF 510 PinGold-Plated 510 ConnectionPackage Contents1 Simple EX Squonk Box Mod1 Simple EX RDA2 1.24ohm Superfine MTL Fused Clapton Coils1 Screwdriver1 Allen Key1 Regular 510 Pin1 Spare Parts Bag1 MicroUSB Cable1 Warranty Card1 User Manual Vandy Vape Simple Ex Squonk Kit
C$64.99
5/5 1 Review
5501
Choose Options
Innokin
Innokin presents the EQ All In One Ultra Portable System, a low-profile, ultra-portable device with 800mAh of battery life, 2ml juice capacity, and a dual power mode. The EQ has a single oversized firing button that allows the user to activate boost mode, which boosts the power output from the standard 13.5W to a boosted 15.5W. There is a built-in LED battery life indicator on the button that displays white for a full charge and red for low battery life. The EQ has an 800mAh battery that can be charged with the micro USB port at the bottom of the device. The Innokin EQ comes with a refillable 2.0ml pod system that utilizes a built-in Innokin 0.5 ohm Plexus mesh coils. The pod can be refilled by turning the base and exposing dual fill ports. The EQ replacement pods have fixed airflow and comes with a protective top cap. The Innokin EQ is excellent for beginners or those looking for a discreet and stealthy vape.Product FeaturesAll In One SystemSingle Fire Button OperatedDual Power ModesRegular Mode: 13.5WBoost Mode: 15.5WPress and Hold Firing Button to Change Power ModeThree Presses to Power On/OffIntegrated 800 mAh Rechargeable BatteryMicro USB Charged2.0ml Magnetic Replacement Pod SystemBottom FilledTurn Base To FillDual Fill PortsBuilt-In Plexus EQ Coil Technology0.5 ohmMesh CoilMouth-to-LungClear Tank ReservoirFixed AirflowMulti-Use Top CapActs as Drip TipAccess CoilProtective Cap IncludedLED Battery Life IndicatorFull PowerWhiteLow PowerRedAluminum Alloy ConstructionPackage ContentsOne Innokin EQ DeviceOne EQ Refillable PodOne Micro USB Charging CableUser Manual Innokin EQ Ultra Portable Kit
C$30.99
5/5 1 Review
5501
Choose Options
Vapeccino
The Vapeccino Mate Ultra Portable Kit is a draw activated ultra portable device with a built-in 410 mAh battery, utilizes two types of Golden Core Technology Refillable Pod systems, and an intelligent vibration reminder system. The Golden Core Technology used in the coils of the pod prevents e-liquid buildup on the coils which prolongs the flavor and lifespan of the usage. The kit includes one 1.5 ohm refillable pod meant for mouth-to-lung use. The Vapeccino is powered by a built-in 410mAh battery and features a standby time of 56 days, usable for 165 puffs, and can be fully charged within 25 minutes for maximum uptime. The intelligent vibration reminder will notify the user with one vibration when the pod is inserted, two vibrations will indicate that the battery life is below 15% and three vibrations will indicate that the pod is not in full contact with the device. The device also features a smart LED display that indicates green for 100-60%, blue for 60-35%, and red for 35-0%. The Vapeccino Mate 1 offers portability, quick-charging, and accommodates ample juice capacity to provide an excellent on-the-go device.Product FeaturesUltra Portable SystemDraw Activated FiringRefillable Pod System1.5ml CapacityProprietary ConnectionSide to Bottom AirflowSplash Proof DesignAtomizer Resistances1.0 ohm (Direct Lung)1.5 ohm (Mouth to Lung)Intelligent Vibration RemindersOne VibrationAtomizer LoadingTwo VibrationsPower below 15%The VibrationsPoor Contact410 mAh Built In BatteryLED Battery Life IndicatorGreen100 to 60%Blue60 to 35%Red35 to 0%165 puffs per chargeUSB Charge Port25 Minute Charge TimeModern and Metallic DesignPackage ContentsOne Vapeccino Mate 1 Ultra Portable DeviceOne GCT Replacement Mate 1 Refillable Pods1.5 ohm MTLTwo Extra Silicone PlugsOne USB Charging CableUser ManualWarranty Card Vapeccino Mate 1 Ultra Portable Kit
Choose Options
Hellvape
Hellvape and Heathen have collaborated with The Vapor Chronicles in order to spawn the Drop Dead 24mm BF RDA; a 24mm diameter, four post build deck with gold plated positive posts, 5mm deep juice well and a redesigned airflow inspired by TVC. The Drop Dead has four posts that allow for single or dual coil builds which are secured with either the pre-installed Flathead screws or the included Phillips screws. Unlike the original Dead Rabbit, the Drop Dead is designed with 14 1mm air ports on each side that lead into a downward sloping airflow that maximizes flavour and minimizes leaking. The airflow can be adjusted for both single and dual coil options and a knurled grip allows for easy airflow adjustment. Included with the RDA is an 8mm wide bore 810 resin drip tip, an 8mm wide bore 810 clear frosted drip tip, and a 510 drip tip adapter for various drip tip styles and use. The Drop Dead RDA also includes a gold plated bottom feed pin to convert your RDA into a bottom-feeding rebuildable atomizer. The Drop Dead is a gorgeous product of the collaboration between Hellvape, Heathen, and TVC that takes the excellent airflow, build deck, and aesthetic that makes this RDA a great addition to any collection.Product Features24mm DiameterTop Terminal Four Post Build DeckSingle Terminal Per PostSingle or Dual Coil Options2.5mm Terminals Per PostSide Mounted Flathead ScrewsPre-InstalledSide Mounted Phillips ScrewsGold Plated Positive Posts5mm Deep Juice WellDouble O-Ring SecuredInternal Barrel LockPEEK Insulator14 Air Flow Holes Per Side1mm Each Air HoleDownward Sloping AirflowSingle or Dual Coil OptionsFully CloseableKnurled Grip To Adjust Airflow With Ease8mm Wide Bore 810 Resin Drip Tip8mm Wide Bore 810 Frosted Clear Drip Tip Included510 Drip Tip Adapter IncludedGold Plated 510 ConnectionGold Plated Bottom Feed Pin304 Stainless Steel ConstructionPackage ContentsOne Hellvape X Heathen X TVC Drop Dead 24mm BF RDAOne 8mm Wide Bore 810 Resin Drip TipOne 8mm Wide Bore 810 Clear Frosted Drip Tip510 Drip Tip AdapterSpare Parts PackGold Plated Bottom Feed PinOne Allen KeyOne Phillips ScrewdriverOne Flathead Screwdriver Hellvape Drop Dead RDA
C$42.99
5/5 2 Reviews
5502
Choose Options
Geekvape
The Geek Vape Creed 25mm RTA is a revolutionary design in the rebuildable tanks sector, integrating an interchangeable airflow system, spacious two-post build deck, and an impressive 6.5mL maximum juice capacity. The GeekVape Creed RTA is fashioned from superior stainless steel and has a dynamic airflow system, allowing users to change the three different types of inner airflow chambers to match the preferred vaping style. External airflow enters the structure through three external airslots, fully adjustable by the AFC ring to deliver intense flavor and dense clouds. The spacious build deck hosts a two-post design, implementing large terminal openings to accommodate a plethora of coil leads. The convenient top-fill method is accessed by unscrewing the threaded top cap to reveal a large fill port, featuring a 4.5mL juice capacity that can be increased to a whopping 6.5mL of eLiquids with the bulb glass.Product Features25mm Diameter4.5mL Standard Juice Capacity6.5mL Maximum Juice CapacitySuperior Stainless Steel ConstructionSpacious Build DeckTwo-Post - Single Terminal Per Post DesignTop-Secured via Slotted Flathead ScrewsLarge Terminals For Easy Coil Lead PlacementSingle or Dual Coil ConfigurationPEEK InsulatorThree Interchangeable Internal Airflow OptionsThree External Airslots - Adjustable AFC Ring18mm 810 ULTEM Widebore Drip Tip 510 Delrin Widebore Drip Tip510 Drip Tip AdapterGold-Plated 510 ConnectionAvailable in Silver, Gunmetal, Gold, Rainbow, Blue, BlackPackage Contents1 Creed RTA3 Internal Airflow Chambers1 Spare Glass Tube1 Allen Key1 510 Drip Tip1 810 Drip Tip1 Spare Parts Pack1 User Manual Geekvape Creed RTA
C$49.99
0/5
0500
Choose Options
Nitecore
Take the NITECORE LC10 magnetic USB battery charger on your next trip and say goodbye to bulky charging solutions. Compatible with many common Li-ion and IMR battery types, this minimalist charger uses two magnetic contacts to quickly charge your batteries via any USB power source. Charging progress is reported through a simple to read indicator light while internal safety protections prevent overcharging and short circuits.Charge Other DevicesNeed to charge something else? When paired with a charged battery, the LC10 can be used as a power bank. Use the standard micro-USB 2.0 output to charge your devices like cell phones, cameras and headlamps from a charged battery quickly and conveniently. An included lightning adapter adds support for Apple devices!Backup Reading LightAdding even more functionality to the LC10 is a mini backup light you can use for reading, lighting up the tent or emergency situations. With three adjustable brightness levels, the LC10 emits up to 10 lumens when plugged into a wall outlet and 6 lumens when powered by a 3400mAh battery.Product FeaturesUSB charger can be used to charge many common li-ion and IMR battery typesOperates as a power bank when paired with a charged batteryMini backup light has three adjustable brightness levelsEquipped with an integrated USB 2.0 input and output port as well as a lightning adapter for Apple devicesFeatures multiple safety protections, including automatic termination upon charging completionCompatible with power banks, 5V solar panels, and USB adaptersCompatible with:12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700 TECHNICAL SPECIFICATIONSInputDC 5V ≥0.5AOutput4.2V±1% (BATTERY) / 5V±5% (USB); 1A MaxCompatible Battery TypesLi-ion/IMR: 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700 (Compatible with 3.6V or 3.7V cylinder rechargeable Li-ion battery)Maximum Brightness10 lumensDimensionsL-9.65"xW-0.96"xH-0.73"Weight0.98oz Nitecore LC10 Magnetic Travel Charger
Add to Cart
Freemax
The FreeMax Mesh Pro Sub-Ohm Tank is the ultimate edition of the FireLuke series, introducing a new multi-mesh coil system with compatibility with the original, as well as 6mL maximum juice capacity and dual slotted bottom airflow. Measuring 25mm in diameter, the new Mesh Pro Tank implements a beautiful material construction frame geared towards user-friendly designs. The crowning achievement lies within the coil system, featuring more surface area that results in even heating of cotton and eJuice for a consistent vaping experience. The new Mesh Pro Coil System if fully compatible with the FireLuke Tank and FireLuke Pro Tank. Massive dual slotted bottom adjustable airflows measuring in at 16mm by 4mm each allows for ample air channels into the chamber, producing maximum flavour and clouds. Finally, the new retractable sliding top-fill provides easy refills perfect for on-the-go.Product Features25mm Diameter6mL Maximum Juice CapacityOptional 5mL & 4mL Juice Capacity - Slimmer Profile Superior Stainless Steel Construction with Resin Mesh Pro Coil SystemKanthal Single Mesh 0.15ohm Coil - Rated for 40-70WKanthal Double Mesh 0.2ohm Coil - Rated for 60-90WKanthal Triple Mesh 0.15ohm Coil - Rated for 80-110WSS316L Single Mesh 0.12 Coil - Rated for 400°F - 550°FConvenient Push-Slide Top Fill DesignDual Bottom Adjustable Airflow Control18mm Widebore 810 Drip Tip Gold-Plated 510 ConnectionPackage Contents1 Mesh Pro Sub-Ohm Tank1 Kanthal Single Mesh 0.15ohm Coil 1 Kanthal Double Mesh 0.2ohm Coil1 Replacement Pyrex Glass1 Set of Replacement O-Rings1 User Manual Fireluke Mesh Pro Sub-Ohm Tank
C$37.99
5/5 4 Reviews
5504
Choose Options
Justfog
The C601 Ultra Portable System by JUSTFOG is a robust and miniature ultra portable pod system that features a turn to cover pod notch with a integrated press to fire switch along with an intuitive refillable pod system that allows you to utilize your favorite Nicotine Salts E-Liquid. The C601 is an all in one system with a single button control interface, a magnetic pod system that can hold up to 1.7ml of E-Liquid, and an atomizer resistance of 1.6 ohm. A 650 mAh built in battery powers the device with an LED battery life indicator that is located around the on the firing button. The C601 is constructed out of aluminum while the pod is is constructed with polycarbonate. The C601 Ultra Portable System is an extremely small and convenient all in one, ultra portable system that is perfect for users looking for a sleek all-day vaping device!Product FeaturesAll in One SystemSingle Button OperatedPress to Fire3.5V Constant Voltage FunctionRefillable C601 Pod System1.7ml Capacity1.6 ohm Atomizer ResistanceProprietary ConnectionPlug and Play ConnectionGold Plated Proprietary ConnectionPod Acts as Tip650mAh Built In BatteryLED Battery Life IndicatorUSB Charging PortBattery Life IndicatorWhite LED Lights100 to 70%Blue LED Lights70 to 30%Red LED Light30% to 0%Six Red LED Lights Blinking0%Device ProtectionShort Circuit Protection/Overheating Protection/Overdischarge Protection/Overcharge Protection/ Overvoltage Charge ProtectionPackage ContentsOne C601 Ultra Portable DeviceOne C601 Replacement PodOne USB CableOne User Manual Justfog C601 Ultra Portable System
OUT OF STOCK
Wotofo
Due to the nature of manufacturing and design, each Wotofo x JMT Elite Warrior 25mm BF RDA drip tip colors come in random. Photos are for reference only and are not representative of the variances of each unit. Each unit will be sent out as packaged and at random.Wotofo, in collaboration with JMT Elite presents the Warrior 25mm Bottom Fed RDA, a clamp style, two post build deck rebuildable atomizer with four top-mounted Phillips screws, a 4mm deep juice well, and a fully adjustable beehive style airflow. The clamp style two post build deck features two 3.5mm by 6mm terminals that are secured by two Phillips screws. The Warrior has a 4mm juice well and an included single coil build adapter and a 510 drip tip adapter for added versatility. The stainless steel top cap has a fully adjustable beehive style airflow with 24 airflow slots, measuring 1mm each. The Warrior has a pre-installed 24K gold plated squonk pin, and an included 24K gold plated standard pin. The Warrior comes with one knurled 810 Delrin drip tip and one 810 resin drip tip each measuring at 11mm Bore. The Wotofo x JMT Elite Warrior 25mm BF RDA is a versatile RDA that has plenty of build space for the most complex speciality coils and ample adjustable airflow for user preference. Product Features25mm DiameterClamp Style Two Post Build Deck3.5mm by 6mm Each TerminalTop Mounted Phillips ScrewsPEEK Insulator4mm Deep Juice WellSingle Coil BuildsBeehive Style Airflow24 Airflow Slots Each Side1mm Each Airslot24K Gold Plated Bottom Feed 510 Contact11mm Bore 810 Drip Tip510 Drip Tip AdapterPackage ContentsOne Wotofo x JMT Elite Warrior 25mm RDAOne Spare 810 Drip TipOne 510 Drip Tip AdapterOne Piece Single Coil AdapterThree Juggernaut Coils(26+36)x2+0.1x0.4 N80ID 3mm0.28 ohmOne Japanese CottonOne Extra Spare Parts BagOne ScrewdriverOne Allen KeyOne User Manual Wotofo Warrior BF RDA
C$39.99
3/5 2 Reviews
3502
Choose Options
Smok
SMOK introduces their utmost elegant device in a smaller form factor, the X-Priv Baby, capable of 80W of maximum power output, 2300mAh built-in battery, whilst maintaining the beautiful 2 inch high definition display along with the notable TFV12 Baby Prince. The X-Priv Baby has been designed to integrate all of SMOK's newest and most cutting edge features, design, and output technology into a compact and visually striking chassis. Powered by SMOK's chipset, the X-Priv Baby is capable of 1 to 80W of output, a trio of output setting adjustments, and comprehensive temperature control suite that packs in adjustable TCR as well as Preheat capability. This suite of features makes the X-Priv Baby the most capable and versatile platform. While the dimensions of the X-Priv Baby is much smaller than its predecessor, the 2 inch high definition display remains, allowing users to view essential vaping data with ease and comfort. User control for adjustment is implemented through a three button interface, a rich and more intuitive menu design is implemented for a more efficient use and easier adjustment control with a full array of essential data. Included with each kit is the new SMOK TFV12 Baby Prince Sub-Ohm Tank which combines the best elements of two of the most popular and critically acclaimed tanks today, packing in the manageable size and affordable performance coil family with the capacity and range of the full sized TFV12. The flagship device of SMOK's incredible line-up, the X-Priv Baby 80W TC 2300mAh Box Mod and TFV12 Baby Prince Sub-ohm Tank combine to create the showcase set-up of the year. There are as many distinct vaping personalities as there are vapers. You've got the hardcore cloud chasers, and you've got the casual vaper. The SMOK X Priv Baby Kit is a rig that has an appeal for everyone. It achieves a blend of power and portability that is rarely seen in vaping devices today. A SMOK X Priv Baby mod works exceptionally well for those vapers who occupy that space between serious and recreational vaping. These individuals want big flavor and substantial clouds without being forced to navigate the bells and whistles of an advanced mod. The SMOK X Priv Baby satisfies this objective on a grand scale. This rig’s 80W is plenty of power for generating vapor volume. The 2300 mAh battery is capable of powering multiple vaping sessions without a recharge. The SMOK X Priv Baby 80W device gives you the essentials mixed with the ability to tweak some settings if you so desire. The SMOK X Priv Baby TFV12 Vape Starter Kit also includes what is arguably the most advanced sub tank made by the brand, but the TFV12 is user-friendly and easy to maintain. This is the kit for you if you've been thinking about switching to a mod but are a little intimidated by making the move.Product FeaturesSMOK X-Priv Baby Features:1 to 80W Power Output0.5V to 9.0V0.1 to 2.5 ohm Atomizer Resistance RangeThree Setting Output ModeHardNormalSoftFirmware UpgradeableTemperature Control OutputNi200 Nickel SupportTitanium SupportStainless Steel SupportAdjustable Initial ResistanceAdjustable TCRPreheat Capability200 to 600 degree Fahrenheit Output Range0.05 to 2.0 ohm Atomizer Resistance Range2" Colorful HD ScreenVibrant Display ResolutionIcon Based Display MatrixHighly VisibleComprehensive Menu Settings and AdjustmentFull DisplayDual Battery Life IndicatorMenu Color CustomizableBluePurpleOrangeRedWhiteGreenInnovative and Ergonomic Firing MechanismComfortable and Easy to UseSqueeze to Fire OperationBuilt-in 2300 mAh BatteryMultiple Venting HolesZinc Alloy ChassisStainless Steel 510 ThreadingGold Plated 510 ContactX-Priv Baby Dimensions:68mm by 47mm by 29mmTFV12 Baby Prince Product Features:23mm Diameter Base26mm at Widest PointHinge and Lock Top Fill SystemSwivels Open and ShutFill Port2ml Max Standard Capacity4.5ml Max Convex Glass Extension CapacitySMOK V8 Baby Coil FamilyV8 Baby Q4 Coil Head0.4 ohmQuadruple Coils30 to 65W Range50 to 60W Recommended RangeV8 Baby T12 Red Light Duodecuple Coil Head0.15 ohmPatented Octuple Coil50 to 90W60 to 80W Recommended RangeEmits Red LightV8 Baby Mesh Coil Head0.15 ohmMesh Coil40 to 80W60 to 70W Recommended RangeCompatible with Additional V8 Baby CoilsDual Adjustable AirslotsStainless Steel and Glass ConstructionPackage ContentsOne SMOK X-Priv Baby 2300mAh Box ModOne SMOK TFV12 Baby Prince TankTwo Baby Q2 0.4 ohm CoilOne PreinstalledUSB Charging CableReplacement Parts and GlassUser Manual Smok X-Priv Baby 80W Starter Kit
Add to Cart
Hellvape
The DROP SOLO 22mm RDA by Digiflavor and The Vapor Chronicles is the follow-up successor to the wildly successful DROP RDA, featuring a smaller 22mm frame with a unique single coil deck with horizontal multi-airslots side airflow control. The DROP SOLO RDA implements a smaller form factor, catering for single-coil flavor chasers with two optional frame structure - Stainless Steel and PMMA Low Profile Cap. The build deck implements a two-post, single terminal per post with a notch design that allows from trimming of coil leads. With the metal frame that caters more towards vapor-production, the DROP SOLO integrates 10 small side-holes that are intuitively adjusted via twisting the top cap for a stepped airflow design. The PMMA transparent cap offers a reduced atomizer chamber and lower profile, catering towards flavor-focused performance. Each kit includes various functional accessories, such as 24mm stylish ring, Squonk BF 510 Pin, and a set of prebuilt coils.Product FeaturesDesign Collaboration by Digiflavor & The Vapor ChroniclesA TVCreation Project22mm Diameter24mm Optional Beautiful Ring5mm Deep Juice Well Superior Stainless Steel ConstructionOptional PMMA Low Profile CapTwo Post, Singler Terminal Per Post Build DeckLarge Terminal Openings - Side Secured via Slotted ScrewsSingle Coil ConfigurationsHorizontal Stepped Airflow Control - 10 Small AirslotsAirflow Channels Adjusted Vertically via Twisting Top CapConical Top Cap Design - Flavor EnhancementSquonk-Ready 510 Bottom-Feeding PinGold-Plated 510 ConnectionAvailable in Stainless Steel, Black, GoldPackage Contents1 DROP SOLO RDA1 PMMA Top Cap1 PMMA Mid Cap1 Squonk BF 510 Pin1 510 Drip Tip Adapter2 0.35ohm Prebuilt Coils1 Allen Key1 Spare Parts Bag1 Instructional Manual Digiflavor Drop Solo RDA
C$44.99
5/5 1 Review
5501
Choose Options
Innokin
Innokin introduces their Kroma-A 75W TC Starter Kit, a new and improved version of the original Kroma, with the Zenith Tank system, a mouth-to-lung tank that is a collaboration of Phil Busardo and Dimitris Agrafiotis. The Kroma-A keeps much of the same functionality of the original Kroma, including its 75W output, a temperature control suite, and 2000 mAh built in battery. The Kroma-A has a three button control face, an LED backlit firing button, and a side mounted OLED screen that displays vital information to the user. Included with the Kroma-A is Innokin's Zenith Tank, a 23mm diameter tank that is capable of holding up to 4ml of E-Liquid. The Zenith MTL Tank utilizes the Zenith coil family and comes with a 1.6 ohm MTL coil, rated for 10 to 14W and a 0.8 ohm MTL coil, rated for 15 to 18W. Airflow enters the Zenith MTL Tank via adjustable bottom airflow and each airslot contains four air holes.The Zenith can accommodate 4ml of e-liquid and can be easily filled by through a large fill port accessible by twisting the top of the tank. A 4mm bore delrin drip tip allows the user to experience great flavor and MTL feel. With its improved design and the amazing Zenith Tank, the Innokin Kroma-A 75W TC Starter Kit is a great choice for newer vapers looking for an easy to use mouth-to-lung system.Product Features6 to 75W OutputUltraFast Output0.2 Second Rate of Firing0.5W Increments27.5A Maximum Output Current7.5V Maximum Output Voltage0.1 ohm Minimum Atomizer ResistanceTemperature Control SuiteNi200 Nickel Support0.1 to 0.2 ohm Atomizer Resistance RangeTitanium Support0.1 to 0.5 ohm Atomizer Resistance RangeSS316L Support0.2 to 1.0 ohm Atomizer Resistance RangeDry Hit Detection and Prevention Technology300 to 600 Degree Fahrenheit Output RangePreBoost Ramp-Up Technology25 to 75W SettingCustomize Rate of HeatingIntegrated 2000 mAh Battery5V/2A Maximum Charge RatePassthrough TechnologyThree Button Control FaceLED Backlit Firing ButtonSide Mounted OLED ScreenThree Column Two Row DisplayAtomizer ResistanceOutput Temperature/WattageOutput Mode and MaterialBattery Life IndicatorRotatable ScreenZinc Alloy ChassisKnurled GripErgonomic CurvatureGold Plated 510 ConnectionLow Voltage/Short Circuit/Atomizer Connection/Over Discharge/Overheat ProtectionZenith MTL Tank by PBusardo and Vapingreek⁠23mm DiameterTwist to Open Top Fill SystemLarge Fill Port4ml Tank CapacityZenith Coil Family1.6 ohmMTLKanthal10 to 14W0.8 ohmMTLKanthal15 to 18WAdjustable Bottom AirslotsFour Different Airflow Holes2mm1.5mm1mm0.5mmCan Be Adjusted to be Fully OpenCan Be Adjusted to be Single4mm Bore Delrin 510 Drip Tip5mm Bore Delrin 510 Drip TipStainless Steel 510 ConnectionPackage ContentsOne Innokin Kroma-A 75W TC Box ModOne Innokin Zenith TankOne 1.6 ohm CoilPre-installedOne 0.8 ohm CoilOne Extra Drip TipOne Micro USB CableSpare O-Rings and Glass Tank SectionOne Innokin Vape BandOne Quick Start Guide iTaste Kroma-A and Zenith 75W Starter Kit
Choose Options
Smok
The SMOK TFV12 Prince Replacement Coil Pack are high performance replacement coils for the TFV12 Prince Sub-Ohm Tank and continues the classic TFV8 series coil design and function. The TFV12 Prince Replacement Coils come in three types: V12 Prince-T10 coils that are 0.12 ohm decuple coils rated for 60 to 120W, V12 Prince-Q4 coils that are 0.4 ohm quadruple coils rated for 40 to 100W, V12 Prince-X6 coils that are 0.15 ohm sextuple coils rated for 50 to 120W, and V12 Prince-M4 coils that are 0.17 ohm quadruple coils rated for 30 to 70W. The V12 Prince RBA Head is one of the most capable in it's class, with an 17mm diameter deck that integrates a two post, dual terminal design with each terminal measuring 2mm in diameter. Ample airflow feeds into the V12 Princ RBA, with dual 8mm by 5mm internal airslots while wicking is efficient due to the unified wick port designs.Product FeaturesSMOK V12 Prince Coil FamilyV12 Prince-T10 Decuple Coil Head0.12 ohmPatented Decuple Coil60 to 120W80 to 110W Recommended RangeV12 Prince-Q4 Quadruple Coil Head0.4 ohmPatented Quadruple Coil40 to 100W60 to 80W Recommended RangeV12 Prince-X6 Sextuple Coil Head0.15 ohmPatented Sextuple Coil50 to 120W80 to 100W Recommended RangeV12 Prince-M4 Quadruple Coil Head0.17 ohmPatented Quadruple Coil30 to 70W45 to 55W Recommended RangeV12 Prince RBA Head17mm DeckTwo Post Build DeckDual Terminal Per Post2mm Diameter TerminalsDual 8mm by 5mm Internal AirslotsUnified Wicking PortsPreinstalled Dual 0.25 Clapton CoilsV12 Prince Mesh Coil0.15 ohmMesh Coils40 to 80W60 to 70W RecommendedV12 Prince X2 Clapton Coils0.4 ohmDual Clapton Coils40-80W60-70W Recommended Smok TFV12 Prince Replacement Coils
C$16.99
5/5 20 Reviews
55020
Choose Options
Vaporesso
Vaporesso presents the Nexus All In One Ultra Portable Device, a draw activated device with 650mAh battery life, 2ml juice reservoir, and adjustable temperature control. This device can be completely charged at a maximum of 1A via USB in just 40 minutes. The 2.0 ml tank reservoir is filled separately from the metal sleeve that holds the NX Coil, allowing the device to be filled through a large filling slot without removing the coil. A metal sleeve with a knurled ring can be adjusted to change the airflow to the user's preference. The same metal sleeve also connects to the 1 ohm NX coil head, which is capable of 7 to 12.5W of power output. The Nexus has a physical on and off button which glows to indicate battery life and temperature control. The temperature and power output can be cycled the default high power and medium and low power settings with three button presses. For The ergonomic multi-use top cap has a built-in notch to unscrew the metal sleeve and coil from the device. The Nexus also features a variety of safety measures such as lower power protection, low liquid detection, and an auto temperature control that keeps the device below 250 degrees Fahrenheit for optimal vapor delivery. The Omni Board Mini chip for this device features a host of safety measures such as auto temperature control, low liquid detection, and overcharge protection. The Vaporesso Nexus is a great device with a simple and convenient user experience that is an great ultra portable device for all users.Product FeaturesDraw ActivationIntegrated 650mAh Rechargeable BatteryMicro USB ChargedFully Charges in 40 Minutes1A Max Charging2 ml Tank ResevoirTop FilledLarge Separate Refill PortAllows Refilling Without Removing CoilNX CCell Coil1 Ohm7 to 12.5 WAdjustable Air FlowAdjustable Through Knurled RingPhysical On/Off ButtonGlows to Indicate Battery LifeWhite100% to 70%Yellow70% to 30%Red30% to 0%Adjustable Temperature ControlLong Press To Check Current ModeThree Button Presses to Cycle Between:High, 230 Degrees FWhite Glow12.5 W Power OutputDefault SettingMedium, 210 Degrees FYellow Glow10.5 W Power OutputLow, 180 Degrees FRed Glow9 W Power OutputMulti Purpose Top CapBuilt In Notch to Remove Coil HeadErgonomic Mouth PieceOmni Board Mini Safety MeasuresAuto Temperature ControlLow Liquid DetectionShort Circuit ProtectionOvertime ProtectionOvercharge ProtectionPackage ContentsOne Vaporesso Nexus DeviceTwo NX CCell CoilsOne Pre-InstalledOne Micro USB Charging CableUser Manual Vaporesso Nexus All in One Kit
C$25.99
5/5 1 Review
5501
Choose Options
Nitecore
NITECORE Q6 At-A-GlanceCharges up to 6 batteries simultaneouslyMonitors and charges each of the 6 slots independentlySpend less time charging with speeds up to 2A in a single slotAutomatically detects the power level of batteries & selects the appropriate voltage and charging modeBuilt-in safety protections to prevent short circuits, overcharging, and improperly inserted batteriesCompact size and lightweight design ideal for travelIncluded in the BoxNITECORE Q6 chargerSix Slot Li-ion/IMR ChargerWhen you go through a lot of batteries on a frequent basis, the NITECORE Q6 Six Slot Quick Charger is up for the task. Capable of charging up to six li-ion/IMR batteries at a time, the Q6 is compatible with many popular battery sizes including 18650, 16340, 14500, 18350 and more. A compact and slim body makes this charger ideal for both travel and daily home use.Speedy and Easy to UseDon't waste your time waiting for your batteries to charge. The Q6 supports charging speeds up to 2A in a single slot to quickly and efficiently charge your batteries. Intelligent circuitry automatically identifies the inserted battery and applies the appropriate charging current and voltage. Know at a glance when you're charging is complete with an easy to read indicator over each slot. During charging, the light will illuminate red and turn green upon termination.Built-in Safety ProtectionsYour batteries are protected from short circuits, overcharging and from improper insertion with the Q6's built-in safety mechanisms. In the case of an error, the indicator light over the affected slot will flash to alert you. Nitecore Q6 6-Bay 2A Charger
Add to Cart
Smok
The SMOK TFV12 Prince Cobra Sub-Ohm Tank is the revolutionary update to the high-performance TFV12 Prince series, integrating an exquisite Cellular Mesh wall sleeve and the ability of Magic Gradient changing colors as you vape (select colors only). Maintaining similar chassis structure with intricate details on the bottom and top base, the TFV12 Prince Cobra Edition maintains the high-quality SMOKTech's craftsmanship. The addition of the Cellular Mesh provides a stunning visual prowess, combined with the Magic Gradient that allows the tank itself to change colors as you vape (only available in certain colorways). Each set comes with a bulb glass that features 7mL of maximum juice capacity, with the addition of acrylic bulb tube and acrylic drip for additional accessories! The TFV12 Prince Cobra has the upgraded rotary hinge top-fill method, with the implementation of a new locking mechanism that can be accessed when pushing the lock button. The TFV12 Prince Cobra introduces three new coil structures to the extensive TFV12 Prince Coil Structures: V12 Prince Mesh Core, V12 Prince Strip Core, and V12 Prince X2 Clapton. A culmination of creative imagination and phenomenal execution upon these details, the TFV12 Prince COBRA Edition is set to become the most desired Sub-Ohm Tank in the industry.Product FeaturesCobra Edition25.5mm Base Diameter28mm Diameter - Widest Section7mL Maximum Juice CapacitySuperior Stainless Steel ConstructionHigh-Grade Glass ReinforcementOptional Acrylic Bulb Glass - Resin DesignCellular Mesh Structure Magic Gradient - Color Changes When You VapeConvenient Top-Fill Rotary Design - Lock Button MechanismMassive Dual Adjustable Airflow Control at Base810 Cobra Resin Ultra-Wide Drip TipPerformance-Grade V12 Prince Coil Structure0.15ohm V12 Prince Strip Core - rated for 40-100W0.15ohm V12 Prince Mesh Core - rated for 40-80W0.4ohm V12 Prince X2 Clapton Core - rated for 60-140W510 ConnectionPackage Contents1 SMOK TFV12 Prince Cobra Tank 1 0.15ohm V12 Prince Strip Core1 0.15ohm V12 Prince Mesh Core1 0.4ohm V12 Prince X2 Clapton Core1 Preinstalled Convex Bulb Glass Tube1 Acrylic Bulb Tube1 Acrylic Drip TipSpare Parts & O-RingsInstructional Manual Smok TFV12 Prince Cobra Edition
C$49.99
5/5 1 Review
5501
Choose Options
Aspire
The Aspire Breeze 2 is a compact dual activation device which features an upgraded built-in 1000 mAh battery, a 3ml tank, and a 1.0 and 0.6-ohm coil system. The Breeze 2 utilizes a firing button, a newly adjustable airflow, and can be charged via a micro USB cable. The Breeze 2 employs the standard U-tech coil technology to ensure flavorful vapour production and is designed for E-Juice containing 70% or less VG. U-tech coil system now comes in 1.0 ohm for nicotine salts use. The combination of a high-performance coil system, ultra-compact form factor, and simplicity makes the Aspire Breeze 2 a great on-the-go device!Product FeaturesAll In One SystemDual Firing ActivationButton ActivationIntegrated 1000 mAh Rechargeable BatteryMicro USB Charged800mA Maximum Charge3.0ml Tank ReservoirTop FilledBreeze U-Tech 0.6 ohm CoilBreeze U-Tech 1.0 ohm CoilUsed for Salt Based Nicotine E-LiquidsAdjustable AirflowLocated When Removing MouthpieceKnurled DesignClear Tank ReservoirDirect Voltage OutputBases on Battery StateCompact Profile19mm by 35mm by 96mmPerfect for Travel and CommutingEasily Fits Within Shirt PocketMulti-Use Top CapActs as Drip TipAccess CoilProtective CapLED Battery Life IndicatorBlue/Orange4.2V to 3.8VBlue3.7V to 3.4VOrange3.3V to 3.0VAluminum Alloy ConstructionPEPG Tank SectionPackage ContentsOne Aspire Breeze 2 DeviceOne 1.0 ohm coilPre-InstalledOne 0.6 ohm coilFour extra O-rings1 Silicone sealOne Micro USB Charging CableUser Manual Aspire Breeze 2 Kit All in One
C$39.99
5/5 33 Reviews
55033
OUT OF STOCK
SvoeMesto
The Kayfun Prime promises to modernize the original Kayfun experience. A pure mouth to lung atomizer; it inherits the functionality and design of its predecessor, the Kayfun 5. That's not to say the internals are the same. The complete internals of the Kayfun prime has been completely redesigned and tuned specifically for MTL vapingThe Kayfun Prime offers an Airflow Control, that is externally adjustable in 6 increments from 1mm to 2mm airflow.Restrict or close off you liquid flow by turning the tank clockwise. In the closed position, you are able to open the top cap and conveniently fill the Kayfun Prime from the top through its large fill hole. An air pocket in the top cap prevents spillage if the tank is filled beyond its capacity, and also ensures an optimal liquid flow.Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil.The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eliminate temperature spikes and therefore create a better flavor profile.SvoëMesto's  has also shrunken the evaporation chamber, which condenses the vapor and gives you a richer, and more flavorful experience, even at lower wattages.Now available in special edition exception colour finishes.Product FeaturesAnti-heat drip tip with POM inlay (engraved)Top fillingBorosilicate glass Liquid control (fully adjustable) PEEK insulator External airflow control 316L stainless steel 510 connector Serial number for authenticationEasy assembly and maintenance MeasurementsDiameter: 22mmHeight: 45,5mm (without mouthpiece)Tank capacity 2ml (standard)4.5mL using the SvoeMesto Kayfun Prime Tank Extension⁠MaterialsStainless Steel ComponentsWNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A)Glass TankBorosilicate GlassInsulatorsPEEK, POM-CO-RingsNBR 70Package Contents1 Kayfun Prime with engraved steel tank1 glass tank1 spare kit Kayfun Prime Special Edition
C$209.99
5/5 8 Reviews
5508
Choose Options
Vaporesso
Vaporesso introduces their new flagship platform, the Polar 220W TC Starter Kit, which utilizes the CASCADE Baby SE Sub-Ohm Tank and latest OMNI Board 4.0 chipset. The Polar 220W TC Box Mod has a 5 to 220W output range, a 0.03 to 5.0 ohm atomizer resistance range, and several output modes, two of which include: Customized Curve of Wattage (CCW), Customized Curve of Temperature (CCT), and Customized Curve of Voltage (CCV) giving the device much functional versatility. The Polar 220W TC device is powered by two 18650 batteries (sold separately) which can be accessed via the magnetized battery door. A 2 inch TFT screen displays essential information to the user, such as wattage/temperature, atomizer resistance, individual battery life display. The screen itself blends into the panel, giving the device a unique and classy look. Along with the aluminium alloy chassis material, The Polar 220W TC device can be charged via USB and has the capability of a 2.5A quick charge, alongside an equalizing charge system and USB input protection. The Polar 220W TC Starter Kit comes paired with the Cascade Baby SE 24.5mm Sub-Ohm Tank that features an expandable tank section, allowing users to use the compact size for 6.5ml capacity, a lift to open top fill system and uses the GT Coil Family. The Top Fill Section of the Cascade Baby are reversed threaded along with the top base for easy cleaning. The Polar 220W TC Box mod along with the CASCADE Baby SE Sub-Ohm tank makes this set up the most versatile and visually stunning device to own.Product Features5 to 220W OutputOMNI Board 4.0Six Total Output ModesInsta-FireSuper Player Mode0.03 to 5.0 ohm Atomizer Resistance Range0 to 8.5V Voltage RangeSmart VWAutomatically Recommend Ideal OutputCan Easily AdjustCustomized Curve of Wattage (CCW)Customize Wattage Output By Second IncrementsCustomize Ramp Up by 0.5 Second IncrementsCustomized Curve of Voltage (CCV)Customize Voltage Output By Second IncrementsBypass ModeFirmware UpgradeableTemperature Control SuiteNi200 Nickel SupportTitanium SupportSS316 SupportCustomized Curve of Temperature (CCT)Customize Temperature Output Over TimeTCR Mode200 to 600 Degrees FahrenheitAtomizer LockMagnetized Battery Bay AccessDual 18650 Battery Powered (sold separately)Sleek and Beautiful Chassis DesignFuturistic StylingFour Button ControlEnlarged Firing ButtonAngular Adjustment ButtonsMode Button2" Inch TFT DisplayTemperature Mode and OutputOutput PowerAtomizer ResistanceIndividual Battery Life IndicatorRemaining Charging Time (RCT)Puff Counter2.5A Quick Charge SystemRemaining Charging TimeEqualizing Charge SystemUSB Input ProtectionMicro USB Charging PortIn-Mould Labeling (IML) Injection Coating and Aluminum Alloy ChassisSpring Loaded Gold Plated 510 ConnectionBurn Protection/Overtime Protection/ Overcharge Protection/ No Load Protection/ Low Resistance Protection/ ESD Circuit Protection/ Short-Circuit Protection/ Low Power Protection/ Pass-Through ProtectionCascade Baby Sub-Ohm Tank Features:24.5mm Diameter6.5ml Tank CapacityInnovative Isolation Structure DesignSeparates the Coil and Juice for a Consistent Flavor and Reduces Dry Hit PotentialLift Twist Top Fill SystemSafety Lock MechanismO-Ring SealedReverse Top Threaded CapReverse Top Threaded Top BaseEasy CleaningGT Coil FamilyGTM Mesh0.18 ohmMesh Coil65 to 75WGTM CCELL 20.3 ohmCeramic Coil35 to 40WTriple Adjustable Bottom Airflow9mm by 3mm Each Airslot7mm Wide Bore 510 Drip TipPackage Contents One Vaporesso Polar 220W TC Box ModOne Vaporesso CASCADE Baby SE Sub-Ohm TankOne 0.15 ohm GT 8 CoilPre-InstalledOne 0.18 ohm GT Mesh CoilMicro USB Charging CableUser Manual and Warranty Vaporesso Polar 220W TC Starter Kit
Choose Options
Vandy Vape
The Triple II 28mm RTA is the successor of the Triple RTA, born out of collaboration with Vandy Vape and VapingwithTwisted420, featuring reworked characteristics such as improved layout of the postless 6 terminal build deck, 7mL maximum juice capacity, and an upgraded Slide-Out Top Fill System. Measuring at 28mm, the Triple 2 RTA is larger than the average RTA with a staggering eJuice capacity of 7mL, thanks to the included bubble glass. Created for novices and advanced users alike, the Triple 2 has a postless six-terminal build deck, with plenty of space that can operate on a single, dual, or triple coil configuration, fastened by side-secured hex screws. Due to the lack of posts within the spacious chamber area, the internal design frees up build space while accommodating larger coil structures and options for advanced Dual or Triple coil system builds. Airflow enters through the massive set of dual adjustable bottom airflows and concentrates upwards towards the coil with 33 small holes in U-Shape configuration, allowing for a honeycomb airflow channel that spreads in every direction. Due to its massive size and many upgraded features, the Triple RTA V2 is an appropriate successor and is sure to be found in the collection of any serious vaper who likes power or enhanced flavor.Product FeaturesCollaboration with VapingwithTwisted41928mm Diameter4mL/7mL Juice CapacitySuperior Stainless Steel ConstructionPyrex Bubble Glass - Resin Design Innovative Postless, Six Terminal DesignLarge Spacious Build DeckSide-Secured via Hex Flat ScrewsThree PEEK-Insulated Positive Terminal PostsThree Negative Terminal PostsSingle, Dual, or Triple Coil ConfigurationsU-Shaped Honeycomb Airflow Aimed Underneath CoilsDual Bottom Airflow Control - Large AirslotsSingle Internal ChamberSlide-Out Top Fill System17.5mm Wide Resin Drip Tip510 Drip Tip AdapterGold-Plated 510 ConnectionPackage Contents1 Triple II RTA1 17.5mm Resin Drip Tip1 Accessory Bag1 4mL Replacement Glass Tube1 510 Drip Tip AdapterInstructional Manual Vandy Vape Triple V2 RTA
C$59.99
5/5 2 Reviews
5502
Choose Options
Horizon Tech
HorizonTech introduces their Falcon Sub-Ohm Tank, a 25.2mm diameter, 7ml E-Juice capacity tank, with a threaded top fill system, POM drip tip, and an entirely unique coil system. HorizonTech introduces their new coil for the Falcon Sub-Ohm Tank, the F1 coil, which is a 0.2 ohm parallel coil head, rated at 80W, with a liquid guiding element of 70% organic cotton and 30% wood pulp, the F2 coil, which is a 0.2 ohm parallel coil head, rated at 80W, with a liquid guiding element of natural flax fiber, the F3 coil, which is a 0.2 ohm parallel coil head, rated at 70W, with a liquid guiding element of flax fiber and flax paper, and finally the M1, a 0.15 ohm mesh coil head, rated at 70W, with a liquid guiding element of 70% organic cotton and 30% wood pulp. Airflow enters the Falcon Sub-Ohm Tank via dual adjustable bottom airslots measuring at 14mm by 3mm each and can be fully closed. Included with the Falcon Sub-Ohm Tank is a 7mm bore proprietary delrin drip tip and a spare parts pack. HorizonTech's Falcon Sub-Ohm Tank is new and intuitive yet maintains much of the same functionality that made the tank so renowned.Product Features25.2mm DiameterThreaded Top Fill SystemTwo Fill Ports7ml Maximum Tank CapacityHorizonTech Falcon Coil FamilyVertical Coil OrientationF1 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding Element70% Cotton and 30% Wood Pulp80WF2 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding ElementNatural Flax Fiber80WF3 Falcon Coil0.2 ohmParallel CoilsLiquid Guiding ElementFlax Fiber and Flax Paper70WM1 Falcon Coil0.15 ohmMesh CoilsLiquid Guiding Element70% Cotton 80% Wood Pulp70WDual Bottom Airslots14mm by 3mm EachFully Closable11mm Bore 510 Delrin Drip Tip8mm Bore 510 Resin Drip TipResin At RandomGold Plated 510Stainless Steel and Glass ConstructionPackage ContentsOne HorizonTech Falcon Sub-Ohm TankOne 0.2 ohm F1 Falcon Coil CoilOne 0.15 ohm M1 Falcon CoilOne 11mm Bore 510 Drip TipOne 8mm Bore 510 Resin Drip TipResin At RandomSpare Glass Tank SectionSpare Parts Bag HorizonTech Falcon Resin Edition Sub Ohm Tank
Choose Options
Aspire
The Aspire Spryte AIO Ultra Portable Pod Kit is the sensational follow-up to the Breeze 2, introducing a streamlined and elongated system with 650mAh rechargeable battery, 3.5mL max capacity, and BVC Coil System. Maintaining the ergonomic nature of Aspire designs, the Spryte System implements a sleek and minimalist structure with the signature protective top cap for the ultimate portability. The pod cartridge can hold up to 3.5mL maximum of eJuice, easily accessible by removing the pod and bottom-filled when removing the silicone plug. Powered by an internal 650mAh battery, the Spryte can be operated by a standard single button-operation, utilizing a constant wattage output of 12W. A throwback to the old school coil system, the Spryte AIO Kit utilized the BVC Coil System (Bottom Vertical Coil) with the introduction of the 1.2ohm BVC NS Coil that is optimized for nic salts along with the inclusion of the standard 1.8ohm BVC Coil for regular eJuice.Product FeaturesAll In One SystemDual Firing ActivationButton ActivationIntegrated 650mAh Rechargeable BatteryMicro USB Charged3.5ml Tank ReservoirTop FilledAspire BVC 1.8 ohm CoilRated for 3V - 5VAspire BVC 1.2 ohm CoilUsed for Salt Based Nicotine E-LiquidsRated for 10-12W (Optimized for Nicotine Salts)Adjustable AirflowClear Tank ReservoirDirect Voltage OutputBases on Battery StateCompact Profile26mm x 108mm x 26mmPerfect for Travel and CommutingEasily Fits Within Shirt PocketMulti-Use Top CapActs as Drip TipAccess CoilProtective CapLED Battery Life IndicatorAluminum Alloy ConstructionPEPG Tank SectionPackage Contents1 Aspire Spryte Pod System1 1.8ohm BVC Coil1 1.2ohm BVC NS Coil1 Silicone Seal2 Extra O-Rings1 MicroUSB Cable1 Warranty Card1 Instructional Manual Aspire Spryte All in One Kit
C$34.99
5/5 3 Reviews
5503
Choose Options
StattQualm
Being produced in Switzerland means a lot. You have fit and finish that is bar-none. You have the signature ematalised deck to make sure shorts are virtually impossible. The non-conductive surface material is used throughout the chamber, with anodized aluminum. Furthermore, there’s several colors to choose from. Interchangeable deck. The ability to transform your Squape E[c] into an MTL atomizer with the MTL valve kit.Moreover, you have the bones of the E[motion] without the price tag. The base is the same. The SS tank section has been replaced with a PMMA tank section that is capable of high heat without any flavor inconsistencies. Thermally deburred, this is a high-tech PMMA material. PMMA is more durable than glass. The bottom-fill assembly on the E[c] is a throwback to previous rebuildable atomizers. Less moving parts = a better price point, with quality that is still top-notch.Product FeaturesLean, mean Swiss vaping machineAnodized aluminum bodyMade in Switzerland22mm diameter5ml of juice capacity (not the 2ml EU version)SS components 1.4404/316LThermally deburred PMMA tank sectionExcellent thermal qualities, terrific with TCDeck accessible with a full tankSingle or dual coil, many different configurations availableMTL kit adaptableEasy fillingNon-conductive anodized aluminum deck & chimney for no shortsDelrin drip tipGold-plated Ecobrass center pinFills from the bottom46mm height without drip tipPackage ContentsStattQualm SQuape E[c]Deck BeSquip tip in blackMTL 1.6mm air reducer screwReplacement screws and o-ringsUser manual Squape E[c]
C$149.99
0/5
0500
Add to Cart
Modefined
Modefined presents the Draco Box Mod, a mod capable of 200W maximum output, full Temperature Control Suite, and a two-inch full-colour screen. The Draco features a power output of 5 to 200 watts with three different power output settings. Standard gives the user 100% power output, while Power gives 133%, and Power+ uses 150% power output. The Draco also has a Temperature Control Suite with Nickel, Titanium, TCR, M1-4, and Bypass Modes. The Temperature Control allows the output of 212 to 600 degrees Fahrenheit. The Draco has a four button design that allows the user to navigate the menu on its 2-inch full-colour screen. The main device screen shows power output and mode, voltage indicator, resistance reading, puff counter, dual battery indicator, and a real-time standby clock. The user interface is presented in a vertical arrangement, allowing the user to navigate and select power output, temperature output, theme and colour selection, and more. The Draco also has four unique screens for overtime, short circuit, low battery, overheating, and atomizer check warnings. The mod can be charged and updated through its USB port. The Draco also has a flip-open battery sled that allows access to two 18650 batteries (batteries sold separately). The top of the Draco Box Mod has a stainless steel 510 atomizer connection with a spring-loaded, nickel plated brass centre pin. The chassis of the Draco is built with a zinc alloy, while the sides are made of a G10 composite material. The Draco 200W TC Box Mod is a great device for users looking for an affordable, capable, and competitive device with a classy and slightly rugged look.Product Features5W to 200W Power OutputOutput ModesStandardPower133% Power OutputPower+150% Power OutputTemperature Control SuiteNi200 Nickel SupportTitanium SupportSS316 SupportTCRM1M2M3M4Bypass Support212 to 600 degrees Fahrenheit Output Range2-inch full-colour screenOutput WattageOutput TemperatureAtomizer ResistanceMaterial and Mode SelectionOutput CurrentCurve OutputDual Battery Life IndicatorReal-Time Standby ClockPuff CounterAuto Locked and Sleep TimeTheme SelectionWallpaper AdjustmentColour SelectionBrightness AdjustmentFour Button Control InterfaceOver-sized Side Firing ButtonDual Adjustment ButtonsMenu ButtonUSB PortCharging and Software UpdateFlip-Open Battery SledAccepts Dual High Amperage 18650 BatteriesBatteries Sold SeparatelyStainless Steel 510 atomizer connectionSpring Loaded Nickel Plated Brass Center PinZinc Alloy and G10 ConstructionUpgradable Firmware SettingOvertime Protection/Adjustable from 5 to 15 Seconds/Short Circuit Warning/Low Battery Warning/Overheating Warning/Check Atomizer WarningPackage ContentsOne Modefined Draco 200W DeviceOne USB DeviceOne Draco User Manual Modefined Draco 200W Mod
Choose Options
Augvape
Augvape Intake 24mm RTA Augvape introduces their Intake RTA, a 24mm rebuildable tank atomizer with a quarter turn threaded top cap with top fill capability, exposing two large fill ports, allowing the RTA to hold up to 4.2ml of your favorite E-Liquid. The Intake is also capable of holding 4.2ml of E-Liquid with the bubble glass tank section, and 2.5ml for the standard tank capacity. The build deck on Augvape's Intake is a two post build deck that must be removed from the base of the RTA. There are two terminals total, with each measuring at 3mm, corner wicking cutouts, and PEEK insulation. Airflow enters the Intake via dual adjustable top airslots, measuring at 10mm by 3mm each and can be fully closed. A 8mm wide bore delrin drip tip allows the user to intake ample vapor, however, a 510 drip tip adapter is included for more versatility. Augvape's Intake RTA is a simplistic RTA that is perfect for those looking for an RTA that can be used as a regular or shorty sized rebuildable tank atomizer.Product Features24mm Diameter4.2ml Bubble Tank Capacity2.5ml Standard Tank CapacityHigh Capacity Tank ReservoirQuarter Turn TopTwo Large Fill PortsTwo Post Single Terminal Build DeckSingle Coil DesignSingle TerminalSide Mounted Hex ScrewsTop Mounted Philips Screws3mm per TerminalCorner Wicking CutoutsPEEK InsulationDual Adjustable Top Airslots10mm by 3mm Each AirslotFully Closeable8mm Wide Bore Delrin 810 Drip Tip304 Stainless Steel and Glass ConstructionGold Plated 510 ContactPackage ContentsOne Augvape Intake 24mm RTAOne Glass TubeOne ScrewdriverOne 510 AdapterOne Spare Parts Bag Augvape Intake RTA
C$44.99
5/5 7 Reviews
5507
Choose Options
Barrie, ON
531 Bayfield St
Barrie, ON, L4M4Z9
(705) 915-3274
Innisfil Vapes, Wasaga Beach Vapes, Blue Mountains Vapes, Bradford Vapes, Collingwood Vapes
DashVapes BARRIE
Markham, ON
30 Shields Crt
Markham, ON, L3R9T5
(905) 604-3274
Scarborough Vapes
DashVapes MARKHAM
Mississauga, ON
6020 Hurontario St
Mississauga, ON, L5R4B3
(905) 507-3274
Oakville Vapes, Brampton Vapes, Milton Vapes, Burlington Vapes
DashVapes MISSISSAUGA
Peterborough, ON
1840 Lansdowne Street W
Peterborough, ON, K9K2M9
(705) 616-0327
Lindsay Vapes, Kawartha Lakes Vapes, Bobcaygeon Vapes, Port Hope Vapes, Newcastle Vapes
DashVapes PETERBOROUGH
Pickering, ON
1755 Pickering Pkwy
Pickering, ON, L1V6K5
(905) 231-0773
Durham Vapes, Oshawa Vapes, Whitby Vapes, Ajax Vapes, Courtice Vapes, Bowmanville Vapes
DashVapes PICKERING
Richmond Hill, ON
1285 Elgin Mills RD E
Richmond Hill, ON, L4S0B5
(905) 884-3274
Stouffville Vapes, Aurora Vapes, Thornhill Vapes, Newmarket Vapes, Oak Ridges Vapes, King City Vapes
DashVapes RICHMOND HILL
Toronto, ON
216 Adelaide St W
Toronto, ON, M5H1W7
(647) 347-3274
North York Vapes, Etobicoke Vapes, The Beaches Vapes, East York Vapes, Yorkville Vapes, Financial District Vapes
DashVapes TORONTO
Vaughan, ON
3120 Rutherford Rd
Vaughan, ON, L4K 0B1
(905) 205-0546
Woodbridge Vapes, Maple Vapes, Kleinburg Vapes, Concord Vapes
DashVapes VAUGHAN
Waterloo, ON
628 King St N
Waterloo, ON, N2V 1B4
519-513-4799
Kitchener Vapes, Cambridge Vapes, Guelph Vapes, Brantford Vapes, New Hamburg Vapes, Stratford Vapes
Opening Sep 8th, 2018
DashVapes WATERLOO
Best Online Vape Shop & Store in Canada! Serving Ontario, Quebec, British Columbia, Alberta, Saskatchewan, Manitoba, New Brunswick, Newfoundland, Nova Scotia and Prince Edward Island.
Oak
Someone in TORONTO, ON recently purchased a bottle of
Double Barrel Tobacco Reserve Oak
Grand Alarms Reviews & Horror Stories