Vape & E-Cg Battery Chargers | Dash Vapes Sorted by Best Sellers


Filter Sub Categories

Sort

Filter Brands

Xtar
The XTAR VC2 is part of the new premium USB display series. A digital readout shows handy information including battery voltage, current charge rate, and an estimated charged battery capacity. Compatible with any USB source from your computer, cell phone wall adapter, and automotive USB adapter.Package Contents- VC2 charger- MicroUSB cable- Microfiber carrying pouch- User manual- Warranty cardProduct FeaturesLCD display with percentage capacity, estimated charge time remaining, and remaining power in powerbank mode (powerbank mode can only be used with li-ion batteries).Automatically stop charging when complete and restart charging function, so you can keep the batteries inside the charger overnightReverse polarity and charger short circuit protectionABS durable fireproof shell with perfect heat dissipation and high temperature resistanceCompatible with any USB power and wall adaptors, no need to spend extra money to buy more wall adaptorsAutomatic NiMH and NiCd battery detection.Three stages of charging (TC-CC-CV) to maximize your batteries’ lifespan for li-ionPulse charging for NiMH/NiCd0V activation function can rescue your over-discharged batteries. (This feature for advanced users only, charging over-discharged batteries is generally a safety concern)Input voltage: DC 5V 2.1ALi-ion:Cut-off voltage: 4.2V +/- 0.05VCharge current: 0.5/1.0ACut-off current: <= 80mANiMH/NiCd:Cut-off voltage: 1.4 +/- 0.1VPulse charging current: 0.5/1.0AUSB output voltage: 5.0VMax USB output current: 1.0ADimensions: 131mm x 66mm x 33mmWeight: 115g (without batteries and power cord)Compatible with:Li-ion: 10440/14500/14650/16340/17500/17670/18350/18490/18500/18650/18700/22650/25500/26650NiMH/NiCd: AAAA/AAA/AA/A/SC/C/DHow to test your batteries mAh capacityHow to test your batteries mAh capacity:Step 1: Insert your discharged battery (at a discharge cut-off voltage generally below 3.0V)Step 2: Let the battery charge and notice the 0000mAh displayed on the screen. Do not remove the battery until the charge is complete.Step 3: When the battery is fully charged, the screen will show "FULL" and the entire screen will flash 3 times every 10 seconds.Step 4: The mAh on the screen should now give you the batteries actual capacity. Xtar VC2 Plus Battery Charger
Add to Cart
Nitecore
8-Bay Smart ChargerAn all-in-one battery charging station, the Nitecore i8 is a multi-slot intelligent charger that can handle up to 8 batteries at once! Each of the bays of this charger are completely independent, allowing you to charge batteries of various sizes and charge levels in whichever configuration you want. The I8 is capable of charging a wide range of Li-ion and IMR batteries, as well as standard sized NiMH cells. With heavy duty charging power and 8-bay capacity, you'll never need another charger again!USB CompatibleThe Nitecore I8 isn't just a battery charger, it's an all inclusive charging station for both batteries and your vital USB powered electronics. The stored energy within charged batteries can be used to power smart phones, tablets and anything else that runs via USB power thanks to the I8's two USB out ports. This makes the I8 great for travel or as an all-in-one power station for work, an office or at home.Specification:Product name:Nitecore i8 Multi-Slots 5V USB Intelligent ChargerInput:AC 100-240V 50/60Hz 0.6A (Max) 30WDC 12V 3AOutput voltage:battery: 4.2V±1% / 1.48±1%USB: 5V±5%Output current:battery: 1.5A*2, 1A*4, 0.75A*4, 0.5A*8USB: 5V*2.1ACompatible with:Li-ion/IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650Ni-MH (Ni-Cd): AA, AAA, C, DSize:117mm x101mm x134.5mm (Length x width x height)Weight:(488.2g)Product FeaturesActive Current Distribution (ACD)Monitors and charges each of the 8 slots independentlyCompatible with and identifies Li-ion batteries, Ni-MH and Ni-Cd rechargeable batteriesFeatures three charging modes (constant current, constant voltage, -dV/dt)Automatically detects power levels of batteries and selects the appropriate voltage and charging modeOver-charging preventionReverse polarity protection and short circuit protectionActivation function for over discharged protected batteriesUSB outputDesigned for optimal heat dissipationMade from durable PC material (fire retardant/ flame resistant) Nitecore Intellicharger i8 Battery Charger
Add to Cart
Xtar
The XTAR VC2 is part of the new premium USB display series. A digital readout shows handy information including battery voltage, current charge rate, and an estimated charged battery capacity. Compatible with any USB source from your computer, cell phone wall adapter, and automotive USB adapter.Package Contents- VC2 charger- MicroUSB cable- Microfiber carrying pouch- User manual- Warranty cardProduct FeaturesLCD display with current charge rate, voltage display, and estimated capacity.Estimated charged battery capacity feature. Measures how much capacity has been charged into your battery +/- 5% tolerance.Automatically stop charging when complete and restart charging function, so you can keep the batteries inside the charger overnightReverse polarity and charger short circuit protectionABS durable fireproof shell with perfect heat dissipation and high temperature resistanceCompatible with any USB power and wall adaptors, no need to spend extra money to buy more wall adaptors0V activation function can rescue your over-discharged batteries. (This feature for advanced users only, charging over-discharged batteries is generally a safety concern)Three stages of charging (TC-CC-CV) to maximize your batteries’ lifespanInput voltage: DC 5V 1.0ACharge current: 0.5ACut-off voltage: 4.2V +/- 0.05VCut-off current: <= 80mADimensions: 131mm x 66mm x 33mmWeight: 109g (without batteries and power cord)Compatible with:Li-ion: 10440/14500/14650/16340/17500/17670/18350/18490/18500/18650/18700/22650/25500/26650How to test your batteries mAh capacityHow to test your batteries mAh capacity:Step 1: Insert your discharged battery (at a discharge cut-off voltage generally below 3.0V)Step 2: Let the battery charge and notice the 0000mAh displayed on the screen. Do not remove the battery until the charge is complete.Step 3: When the battery is fully charged, the screen will show "FULL" and the entire screen will flash 3 times every 10 seconds.Step 4: The mAh on the screen should now give you the batteries actual capacity. Xtar VC2 Battery Charger
C$29.99
5/5 15 Reviews
55015
Add to Cart
Nitecore
Nitecore has outdone itself once again with this truly universal two channel charger. Its sleek and succinct digital display is coupled with advanced circuitry that allows for unprecedented compatibility with a huge range of battery sizes and chemistry types. Insert your battery into one of the D2's independent charge channels. Each one is separately controlled by the Digicharger's micro-computer so a variety of batteries can be charged simultaneously. The charger will automatically Detect the cell's voltage and chemistry and apply the optimal charging mode. The Digicharger will Charge almost any cylindrical rechargeable cell whether it's Li-ion, IMR, Ni-MH, Ni-CD, or LiFePO4 (LiFePO4 batteries require the charge mode to be set manually). An automatic power-off function will terminate current when charging is complete. On top of this charger's incredible universality, it also includes a comprehensive display to keep you in the loop. The crystalline LCD display presents charging progress, battery type, voltage, charging current, and charging time in an easy-to-read and ultra-clear manner. When charging is finished the display will tell you which channel is ready to go.Product FeaturesCapable of charging two batteries simultaneouslyEach of the two battery slots monitors and charges independentlyCompatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteriesOptimized charging design for IMR batteriesIntegrated LCD panel clearly displays charging parameters and progressTwo conveniently located side buttons allow easy selection of specific battery types and charging parametersIntelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)Compatible with LiFePO4 batteriesCompatible with small capacity batteriesAutomatically stops charging when completeFeatures over-charge prevention to protect batteriesFeatures temperature monitoring to prevent overheatingMade from durable ABS (fire retardant / flame resistant)Features reverse polarity protectionDesigned for optimal heat dissipationCertified by RoHS, CE, FCC and CECInsured worldwide by Ping An Insurance (Group) Company of China, Ltd. Nitecore Intellicharger D2 Battery Charger
Add to Cart
Nitecore
Nitecore has outdone itself once again with this truly universal four channel charger. Its sleek and succinct digital display is coupled with advanced circuitry that allows for unprecedented compatibility with a huge range of battery sizes and chemistry types. Insert your battery into one of the D4's independent charge channels. Each one is separately controlled by the Digicharger's micro-computer so a variety of batteries can be charged simultaneously. The charger will automatically Detect the cell's voltage and chemistry and apply the optimal charging mode. The Digicharger will Charge almost any cylindrical rechargeable cell whether it's Li-ion, IMR, Ni-MH, Ni-CD, or LiFePO4 (LiFePO4 batteries require the charge mode to be set manually). An automatic power-off function will terminate current when charging is complete. On top of this charger's incredible universality, it also includes a comprehensive display to keep you in the loop. The crystalline LCD display presents charging progress, battery type, voltage, charging current, and charging time in an easy-to-read and ultra-clear manner. When charging is finished the display will tell you which channel is ready to go.Product FeaturesCapable of charging four batteries simultaneouslyEach of the four battery slots monitors and charges independentlyCompatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteriesOptimized charging design for IMR batteriesIntegrated LCD panel clearly displays charging parameters and progressTwo conveniently located side buttons allow easy selection of specific battery types and charging parametersIntelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)Compatible with LiFePO4 batteriesCompatible with small capacity batteriesAutomatically stops charging when completeFeatures over-charge prevention to protect batteriesFeatures temperature monitoring to prevent overheatingMade from durable ABS (fire retardant / flame resistant)Features reverse polarity protectionDesigned for optimal heat dissipationCertified by RoHS, CE, FCC and CECInsured worldwide by Ping An Insurance (Group) Company of China, Ltd. Nitecore Intellicharger D4 Battery Charger
Add to Cart
Xtar
The XTAR VP4 charger is an intelligent 4-channel charger which has 4 completely independent ports. Charging currents can be adjusted automatically according to each different channel, and the user can also manually choose the current using the button switch. The screen offers the user the ability to read the charge time, precision battery cut-off voltage, displays battery power indicators, and optional currents. This is a great step up from the VP1/VP2 charger if you're looking for 4-ports with an LCD screen.

This set includes:

- XTAR VP4 Charger
- US / EU / JP AC Adaptor
- Car Adaptor
- Package

The charger is compatible with 10440/16340/14500/14650/17670/18350/18490/18500/18650/18700 and/or two 22650/25500/26650 lithium batteries

Features:

- Compatible with IMR lithium battery
- Each channel is independent
- Three-stage charge algorithm(TC-CC-CV)
- Three charge current options (0.25 A, 0.5 A, and 1.0 A)
- Soft-start function, to avoid damage from large charge current while charging.
- Automatically cut off when the battery is charged fully
- Precision cut-off voltage at 4.2V
- Compatible with small capacity battery
- Over heat protection
- LCD displays each battery real time statues
- Use high power intelligent step-down DC - DC circuit, greatly reduce the energy loss;
- Built-in reverse-polarity and short-circuit protection circuit
- Use fireproof material for the shell
- 0V activation function can wake up the over-discharged/sleeping batteries
- 120°angle high definition VA screen to display the charging current ,voltage and power indicator, you can see the charging status from any angle of view.
- Certified by CE, RoHS
Xtar VP4 Battery Charger
C$54.99
4/5 6 Reviews
4506
OUT OF STOCK
Xtar
The XTAR VP2 charger is our latest professional lithium-ion charger great for a wide variety of battery sizes and capacities. It features precise voltage and battery level display and a brand new added USB powerbank feature. 5V 2A out for charging your other mobile devices.

This set includes:

- VP2 Charger
- US / EU / JP AC Adaptor
- Car Adaptor
- Package

2 Channels 10440/16340/14500/14650/17500/17670/18350/18500/18650/18700

Operation Temperature: Room temperature 0~40℃
Input AC: 12V DC 1000mA
0.25A CC :250mAh±30mAh
0.5A CC :500mAh±50mAh
1.0A CC :1000mAh±80mAh
Cut-off Voltage: 4.2V±0.05V
Detection precision:±0.03V
Weight: 95g
Size(mm): 118.0 length x 62.0 width x 34.0 height

Output: DC 3.0/4.35v
3.0v/3.2v LiFePO4 Battery Charger (Charges to 3.2v)
3.6v/3.7v Li-ion Battery Charger (Charges to 4.2v)
3.8v Li-ion Battery Charger (Charges to 4.35v)

Features:

1. Two independent charging channels for 10440/16340/14500/14650/17500/17670/18350/18500/18650/18700 Li-ion battery
2. Algorithm(CC.CV)charging system
3. Optional and adjustable charge current: 250mA, 500mA, 1A
4. VP2 with switchable LCD indicator to display the real-time charging voltage and battery status
5. Activation function for over discharging battery.VP1 can recover the overly dicharging protected batteries
6. Soft start function avoids damage from a large current surge
7. Automatically restart charging when batteries voltage(full charged batteries not taken out from the charger channel)is below 3.9V(batteries may self discharge)
8. Reverse-polarity protection circuit board
9. USB

Notice: The above-mentioned parameters tested in Lab are approximate and may vary between flashlight/charger, batteries and environments.

What's the main differences between the VP1 and this new VP2?

1. VP2 can charge 26650 batteries.
2. VP2 has 3.2V/3.6V/3.8V optional charging voltage. 3.2V is for Li-FePO4 batteries and 3.6V & 3.7V is for Li-ion batteries.
3. VP2 has indicator lights which can indicate the charging situation.
4. VP2 has a 1A USB output function so that users can use the charger as a USB battery backup (use it to charge mobile phones and other mobile USB devices)
Xtar VP2 Battery Charger
C$44.99
5/5 7 Reviews
5507
Add to Cart
Copyright © 2017 DashVapes Inc - All Rights Reserved
Orange Shake
Someone in Quesnel, BC recently purchased a bottle of
Dairy Dreams Orange Shake