E-Cig & Vape Rebuildable Dripping Atomizers

Vapefly and HORICK TV present the amazing Holic, a mouth to lung rebuildable atomizer that measures at 22.2mm and 24mm with the included beauty ring. This RDA features a full 360 airflow adjustments with multiple options to choose from. Building on this atomizer is done with ease and features a single coil configuration, along with adjustable airflow control internally. The Holic is an amazingly eye-catching atomizer that features a seamless unification of parts. Located on the top of the Holic is a flush 3.5mm tight bore Delrin drip tip. This drip tip is comfortable whether the airflow of the atomizer is fully open or closed. Moving down are different airflow slots. From the largest air slot to smallest, the measurements are 2mm, 1.5mm, and 1mm. This airflow system can be adjusted to be used as single or dual by tightening or loosening the screws located on the build deck. This customizable aspect of the Holic allows users to choose their preference of airflow, maximizing flavor. As an added option, users may swap out the 510 pin for a bottom feeding pin, making this atomizer perfect for squonk devices. Internally, the build deck of the Holic consists of a dual post single terminal build deck. Round wire will comfortably sit in the center, surrounded by three airflow slots, two in which are the adjustable intake slots. The juice well of this RDA measures at 12mm deep, perfect for those utilizing this RDA as a bottom feeder. Located on the rim of the build deck are two slopes that have a dual purpose. The first is to allow a build rod to fit through, ensuring that the coil sits perfectly in the center. The second are notches to attach to the top cap with notches; This notch allows users to change their airflow securely and smoothly.Product Features22.2mm Diameter24mm Diameter with Beauty RingDual Post, Single Terminal Build DeckTop Mounted Hex Screws2mm by 3mm Each TerminalPEEK Insulator12mm Deep Juice Well360 Degree Adjustable AirflowRotating Top CapAdjustable Internal Airflow SystemSide Mounted Flat Head SCrewsLocated on Build DeckFully AdjustableAirflow Slots MeasurementWidest to Smallest2mm1.5mm1mmAdjustable for Single or Dual Airflow Configuration3.5mm Bore 510 Delrin Drip TipStandard Gold Plated 510 PinBottom Feed Pin IncludedPackage ContentsOne Vapefly Holic MTL RDAOne Beauty RingTwo Airflow Control EtsOne T ToolOne Allen Key Two 1.0 ohm Ni80 26ga CoilA Pair of CottonSpare Parts BagBottom Feed 510 Pin

Vapefly

Vapefly Holic 22mm BF MTL RDA

€ 22.07

1

The LowPro RDA is the shortest atomizer that has been released thus far in the market, measuring an absolutely unbelievable 10mm from base to the start of the widebore drip tip, combining with ample dual and single adjustable airflow, a 3.5mm deep juice well, a unique build deck, and a squonk ready additional center pin. The LowPro takes a unique method to the build and post construction, utilizing a cross deck post system that features negatives milled directly from the outer rim and an isolated positive post. This style enables a plethora of builds, including dual coil and single coil configurations. The positive post is plated in silver to ensure a high level of electrical conductivity. Airflow options maximize at 10mm by 2mm for dual or single airflow configurations, allowing for absolutely tremendous airflow while also being able to be throttled down for flavor centric vaping styles. A Delrin Honeycomb Filter simultaneously reduces spitback while providing airflow disruption, connecting into a 12mm competition widebore tip. Packing in a full feature list into an unbelievable form factor, the LowPro RDA by is the quintessential RDA for extreme stealth and compact set-up chasers.

Product Features:

- 22mm Diameter
- 10mm Base to Start of Drip Tip
- 14.5mm Full Height

- 10mm Dual Slotted Airflow
* 10mm x 2mm
* Single Airflow Option
* Fully Adjustable

- 3.5mm Deep Juice Well
- Deckmilled Negatives
- Squared Base and Insulator Center Post
- Silver Plated Positives

- 12mm Competition Bore Built-In Delrin Drip Tip
* Delrin Honeycomb
* Spitback Protection

- Airflow Disruption
- Additional Squonk Ready Center Pin
- The Shortest RDA to Date

Product Includes:
- One LowPro RDA
- One Additional Honeycomb Delrin Piece
- One Squonk Ready Center Pin
- Additional Screws, and Screws

MysticAtmos

LowPro Dripper RDA

€ 34.49

2

Production RDA by Flawless

A more affordable line by Flawless, same great quality you have come to expect and trust from Flawless

Features:

- 22mm deck
- 3 Post design
- adjustable airflow @ 10:30 and 4:30
- Peek insulator
- Made In USA
- Deep Well

Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.

Flawless

Production RDA

€ 34.49

3

The Cascata allows your juice to flow directly to the coil resulting in extremely accurate flavor delivery. The design is sleek and compact, sure to look nice on any mod you pair it with.

Features:

- Titled deck for optimal juice flow to the coils
- Ultra reduced chamber for the most accurate flavor delivery
- Juice Well Hood to guide juice to its choke point
- AFC control which is guided by the negatice screws
- Juice Fillport, works with needle bottles and others.
- Petite low profile nature to pair up with any mod you desire
- Hard gold electoplated pins and screws for maximum conductivity and durability
- 304 stainless steel construction
- Includes the Cartel c2 driptip to cover the fillport
- may also be paired up with other driptips which will give you more airflow
- Deep and Precise engravings of the logos

Recommended Builds:

-26 gauge 5/6 wrap Dual Coil
- 24 gauge 5 wrap Single Coil

Wrap your negative post all through around the screw to ensure the locked position

Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.

Cartel Mods

Cascata RDA

€ 41.40

The Aeolus Rebuildable Dripping Atomizer Version 2 (Pro)

pronounced [ˈe.o.los], (ay-o-los)

Key Features:

Syntheticloud's Signature Vertical Airflow System

All of our atomizers will feature our signature Vertical Airflow System. This system is vastly superior to current airflow dynamics that other manufacturers use. It works by directing airflow directly over and around the heated coils, then evenly clearing out all vapor produced within the chamber. This ultimately produces a much cooler, denser, and tastier vapor while also preventing stagnant vapor from collecting at the bottom.

Versatile Airflow Control

We wanted to cater to the entire spectrum of the vaping community so we implemented a configurable airflow control on all of our designs. With our versatile airflow control system, you are able to select the number of channels in order to adjust the airflow to fit your needs. Do you need competition clouds? The Aeolus V2's maximum airflow setting is about 3x that of the Aeolus V1. Are you a flavor-chaser instead? We included a smaller airhole on each side that cater to those who prefer mouth-to-lung hits. Still not enough flavor for you? The Aeolus V2's airflow control system allows you to dial down to virtually any size airflow.

Anti-Leak Cover

Ever since we first started vaping, leaking has always been the primary reason that deterred us from using rebuildable dripping atomizers. The thought of wasting our favorite juices and spilling it on our clothes and furniture was enough to make us cringe; it was a mess--figuratively and literally. We felt that the horizontal air flow designs of current atomizers were soon to become obselete and we wanted to be the manufacturer that elevates the vaping community into a new status quo. Because our atomizers' airflow draws from the top, you no longer have to worry about your atomizer leaking in your pockets or spilling out when your mod is placed horizontally.

Anti-Spitback Design

Thanks to our signature Vertical Airflow System, you will never be burdened by splashing juice again. The downward pressure of the airflow prevents the juice from splashing into your mouth, which is also great for cloud competitions since it allows you to perform an extended pull and push without having to worry about a mouthful of juice and nicotine.

Reverse-Threading System

Our Aelous V2 features a unique reverse-threading system that prevents your barrel/sleeve accidentally being removed from the deck. The reverse threading system ensures that your device will never threadlock and also includes an o-ring that serves to eliminate any possibility of your juice leaking out from the deck. Since the deck is completely sealed off, the entire atomizer acts as a juice well.

Two Piece Deck

The contacts in the Aeolus V2 Pro are made with pure naval brass in order to minimize voltage drop. We plated the brass with 18k gold to keep the flavor of your juice unaltered, all while giving the deck that high-end look and feel. Since brass is a relatively soft metal, we used stainless steel to make the threading to ensure that your atomizer will be fully functional for as long as possible. The stainless steel screws in the deck are used to hold the two pieces together.

Specifications

Everything you loved about the Aeolus RDA:

‣ Syntheticloud’s Vertical Airflow System

‣ Syntheticloud's Anti-Leak System

‣ PEEK Insulators (649.4ºF)

‣ Unparalleled Flavor

New Features/Improvements:

‣ Wider Range of Airflow Configurations

‣ 3x More Maximum Airflow

‣ Additional Small Airholes for Tighter Draws

‣ Shorter Barrel, Lower Profile

‣ Two Piece Deck

‣ Reverse-Threading System

‣ Anti-Spin Square Centerpost

‣ Larger, Square Post Holes

‣ 18K Gold-Plated Brass Contacts

‣ Stainless Steel Barrel, Top Cap, and AFC

Syntheticloud Tech

Aeolus V2 Pro - Stainless Steel

€ 41.39

4

Your cart is empty

E-Cig & Vape Rebuildable Dripping Atomizers | Dash Vapes Sorted by Best Sellers

Clearomizers and Tanks

Contact Information

Information

My Account

Policies

Blog